Ready to supercharge your AI agents?

Install any skill in seconds. Free to start, no credit card required.

Find Journal Skill · aperivue | DecimalAI

Researchby aperivue

Find Journal Skill

Journal recommendation engine for medical manuscripts. 2-pass matching against a curated public profile library plus any user-local private profiles, enriched with detailed write-paper profiles for top-5 output. Returns ranked recommendations with scope fit rationale, AI disclosure policy, and homepage links. Impact-factor and APC figures in a profile are point-in-time and may be stale — verify current metrics at the journal site. A pre-ranking acceptance-readiness pre-flight scans the manuscrip

Maintained

SkillScore

SkillScore68/100

Test results 68

Safety

3/3 safety checks passed

Code scan
Intent
Content

What it changes

64%68%of test cases passed +5 pts

Without skill14 of 22

With skill15 of 22

3 fixed12 passed either way5 still failing2 broke

Measured on gemini-3.6-flash8/24/2026v1 · latest is v219 comparable

This benchmark measured an earlier version of the skill.

A newer attempt on gemini-3.6-flash on 10/3/2026 did not produce a publishable comparison (graded differently). The snapshot above is the previously measured run.

Track record

Agent runs: 43; All time

See one task, with and without the skill

One test taskIf a user specifies strict constraints (Full OA, Q1 only, single specialty) that result in zero matching profiles from the library, what step is taken to recover options?

Without the skillMissed

With the skillPassed

Same model, same task. Answers are capped and redacted.

Use this skill

Your agent runs on

Adds every file the skill has, pinned so you can update it. No account needed.

pip install "decimalai>=0.15"
decimalai skills add aperivue-find-journal
claude --plugin-dir "$(git rev-parse --show-toplevel 2>/dev/null || pwd)/.agents"

The same install from Python, for a notebook or a setup script.

Install

pip install "decimalai>=0.15"

Add the skill

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("aperivue-find-journal")
if result.exit_code:
    raise SystemExit(result.problems)

print("Added. Start Claude Code with the command below.")

Start Claude Code with it

claude --plugin-dir "$(git rev-parse --show-toplevel 2>/dev/null || pwd)/.agents"

Type these in a Claude Code session. No account or API key. It writes the skill and any files it bundles, and asks first when its safety rating isn't Passed.

Add the DecimalAI plugin, once

/plugin marketplace add decimal-labs/decimalai-claude-plugins
/plugin install decimalai@decimalai

Install this skill

/decimalai:install aperivue-find-journal

The plugin needs python3 and curl on your machine.

No Python or account. Claude Code picks it up in its next session.

Save it into your project

curl -fsSL --create-dirs -o .claude/skills/aperivue-find-journal/SKILL.md https://app.decimal.ai/s/aperivue-find-journal/SKILL.md

Copy SKILL.md

Save it in your project, as

.claude/skills/aperivue-find-journal/SKILL.md

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Claude Code docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[claude-agent-sdk]"
decimalai skills add aperivue-find-journal

Add it to your agent

import asyncio

from claude_agent_sdk import ClaudeAgentOptions
from decimalai.claude_agent_sdk import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

async def main():
    question = "Hello!"
    async with support.run(question) as run:  # one user message, one run
        async for message in run.query(options=ClaudeAgentOptions(max_turns=6)):
            print(message)

# In a notebook or async code: await main()
asyncio.run(main())

Prefer its own loader? ClaudeAgentOptions(plugins=[skills_plugin()], skills="all") reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

The same install from Python, for a notebook or a setup script. agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[claude-agent-sdk]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("aperivue-find-journal")
if result.exit_code:
    raise SystemExit(result.problems)

import asyncio

from claude_agent_sdk import ClaudeAgentOptions
from decimalai.claude_agent_sdk import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

async def main():
    question = "Hello!"
    async with support.run(question) as run:  # one user message, one run
        async for message in run.query(options=ClaudeAgentOptions(max_turns=6)):
            print(message)

# In a notebook or async code: await main()
asyncio.run(main())

Prefer its own loader? ClaudeAgentOptions(plugins=[skills_plugin()], skills="all") reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/aperivue-find-journal/SKILL.md

Give it to your agent

import asyncio
from pathlib import Path
from claude_agent_sdk import ClaudeAgentOptions, query

skill = Path(".agents/skills/aperivue-find-journal/SKILL.md").read_text()
options = ClaudeAgentOptions(system_prompt=f"You are a helpful agent.\n\n{skill}", max_turns=6)

async def main():
    async for message in query(prompt="Hello!", options=options):
        print(message)

# In a notebook or async code: await main()
asyncio.run(main())

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Claude Agent SDK docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[openai-agents]"
decimalai skills add aperivue-find-journal

Add it to your agent

from agents import Agent, Runner
from decimalai.openai_agents import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    name=support.name,
    instructions=support.instructions,  # your prompt, then the skill list
    tools=[*support.tools],             # your tools, then load_skill
)
# In a notebook or async code: result = await Runner.run(agent, "Hello!")
result = Runner.run_sync(agent, "Hello!")

Using SandboxAgent? capabilities=[Shell(), decimalai.openai_agents.sandbox_skills()] points its own loader at the same folder.

Install

pip install "decimalai[openai-agents]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("aperivue-find-journal")
if result.exit_code:
    raise SystemExit(result.problems)

from agents import Agent, Runner
from decimalai.openai_agents import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    name=support.name,
    instructions=support.instructions,  # your prompt, then the skill list
    tools=[*support.tools],             # your tools, then load_skill
)
# In a notebook or async code: result = await Runner.run(agent, "Hello!")
result = Runner.run_sync(agent, "Hello!")

Using SandboxAgent? capabilities=[Shell(), decimalai.openai_agents.sandbox_skills()] points its own loader at the same folder.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/aperivue-find-journal/SKILL.md

Give it to your agent

from pathlib import Path
from agents import Agent, Runner

skill = Path(".agents/skills/aperivue-find-journal/SKILL.md").read_text()
agent = Agent(name="support", instructions=f"You are a helpful agent.\n\n{skill}")
# In a notebook or async code: result = await Runner.run(agent, "Hello!")
result = Runner.run_sync(agent, "Hello!")

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

OpenAI Agents docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[openai]"
decimalai skills add aperivue-find-journal

Add it to your agent

import json

from openai import OpenAI
from decimalai.openai import agent_config

client = OpenAI()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your tools, as Chat Completions takes them, and what answers each.
TOOLS = [{"type": "function", "function": {
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters": {"type": "object", "properties": {"order_id": {"type": "string"}},
                   "required": ["order_id"]},
}}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    # run.system is your prompt, then the skill list.
    messages = [{"role": "system", "content": run.system}, run.message]
    while True:
        reply = client.chat.completions.create(
            model="gpt-5.4-mini",
            messages=messages,
            tools=[*TOOLS, *run.tools],  # your tools, then load_skill
        ).choices[0].message
        messages.append(reply)
        if not reply.tool_calls:
            break
        for call in reply.tool_calls:
            # load_skill is answered by the run; your own tools by FUNCTIONS.
            function = FUNCTIONS.get(call.function.name)
            messages.append(run.tool_result(call) or {
                "role": "tool", "tool_call_id": call.id,
                "content": function(**json.loads(call.function.arguments)) if function
                else f"There is no tool named {call.function.name!r}.",
            })
print(reply.content)

# The Responses API takes run.response_tools instead of run.tools.

Install

pip install "decimalai[openai]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("aperivue-find-journal")
if result.exit_code:
    raise SystemExit(result.problems)

import json

from openai import OpenAI
from decimalai.openai import agent_config

client = OpenAI()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your tools, as Chat Completions takes them, and what answers each.
TOOLS = [{"type": "function", "function": {
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters": {"type": "object", "properties": {"order_id": {"type": "string"}},
                   "required": ["order_id"]},
}}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    # run.system is your prompt, then the skill list.
    messages = [{"role": "system", "content": run.system}, run.message]
    while True:
        reply = client.chat.completions.create(
            model="gpt-5.4-mini",
            messages=messages,
            tools=[*TOOLS, *run.tools],  # your tools, then load_skill
        ).choices[0].message
        messages.append(reply)
        if not reply.tool_calls:
            break
        for call in reply.tool_calls:
            # load_skill is answered by the run; your own tools by FUNCTIONS.
            function = FUNCTIONS.get(call.function.name)
            messages.append(run.tool_result(call) or {
                "role": "tool", "tool_call_id": call.id,
                "content": function(**json.loads(call.function.arguments)) if function
                else f"There is no tool named {call.function.name!r}.",
            })
print(reply.content)

# The Responses API takes run.response_tools instead of run.tools.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/aperivue-find-journal/SKILL.md

Give it to your agent

from pathlib import Path
from openai import OpenAI

client = OpenAI()
skill = Path(".agents/skills/aperivue-find-journal/SKILL.md").read_text()
reply = client.chat.completions.create(
    model="gpt-5.4-mini",
    messages=[
        {"role": "system", "content": f"You are a helpful agent.\n\n{skill}"},
        {"role": "user", "content": "Hello!"},
    ],
).choices[0].message

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

OpenAI SDK docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[anthropic]"
decimalai skills add aperivue-find-journal

Add it to your agent

import anthropic
from decimalai.anthropic import agent_config

client = anthropic.Anthropic()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

question = "Hello!"
with support.run(question) as run:  # one user message, one run
    answer = client.beta.messages.tool_runner(
        model="claude-haiku-5-5",
        max_tokens=4096,
        system=run.system,     # your prompt, then the skill list
        tools=[*run.tools],    # your tools, then load_skill
        messages=[{"role": "user", "content": question}],
    ).until_done()

Install

pip install "decimalai[anthropic]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("aperivue-find-journal")
if result.exit_code:
    raise SystemExit(result.problems)

import anthropic
from decimalai.anthropic import agent_config

client = anthropic.Anthropic()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

question = "Hello!"
with support.run(question) as run:  # one user message, one run
    answer = client.beta.messages.tool_runner(
        model="claude-haiku-5-5",
        max_tokens=4096,
        system=run.system,     # your prompt, then the skill list
        tools=[*run.tools],    # your tools, then load_skill
        messages=[{"role": "user", "content": question}],
    ).until_done()

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/aperivue-find-journal/SKILL.md

Give it to your agent

from pathlib import Path
import anthropic

client = anthropic.Anthropic()
skill = Path(".agents/skills/aperivue-find-journal/SKILL.md").read_text()
reply = client.messages.create(
    model="claude-haiku-5-5",
    max_tokens=4096,
    system=f"You are a helpful agent.\n\n{skill}",
    messages=[{"role": "user", "content": "Hello!"}],
)

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Anthropic docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[google-genai]"
decimalai skills add aperivue-find-journal

Add it to your agent

from google import genai
from google.genai import types
from decimalai.google_genai import agent_config

client = genai.Client()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your functions, as declarations for the model, and what answers each.
TOOLS = [{"function_declarations": [{
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters_json_schema": {"type": "object", "properties": {"order_id": {"type": "string"}},
                               "required": ["order_id"]},
}]}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    config = types.GenerateContentConfig(
        system_instruction=run.system,     # your prompt, then the skill list
        tools=[*TOOLS, *run.tool_params],  # your functions, then load_skill
    )
    contents = [{"role": "user", "parts": [{"text": run.message}]}]
    while True:
        response = client.models.generate_content(
            model="gemini-3.5-flash", contents=contents, config=config,
        )
        if not response.function_calls:
            break
        contents.append(response.candidates[0].content)
        parts = []
        for call in response.function_calls:
            # load_skill is answered by the run; your own functions by FUNCTIONS.
            # A loop of your own rather than automatic function calling, which
            # raises KeyError when the model asks for a function you did not pass.
            function = FUNCTIONS.get(call.name)
            parts.append(run.tool_result(call) or {"function_response": {
                "name": call.name, "id": call.id,
                "response": {"result": function(**(call.args or {})) if function
                             else f"There is no function named {call.name!r}."},
            }})
        contents.append({"role": "user", "parts": parts})
print(response.text)

Install

pip install "decimalai[google-genai]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("aperivue-find-journal")
if result.exit_code:
    raise SystemExit(result.problems)

from google import genai
from google.genai import types
from decimalai.google_genai import agent_config

client = genai.Client()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your functions, as declarations for the model, and what answers each.
TOOLS = [{"function_declarations": [{
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters_json_schema": {"type": "object", "properties": {"order_id": {"type": "string"}},
                               "required": ["order_id"]},
}]}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    config = types.GenerateContentConfig(
        system_instruction=run.system,     # your prompt, then the skill list
        tools=[*TOOLS, *run.tool_params],  # your functions, then load_skill
    )
    contents = [{"role": "user", "parts": [{"text": run.message}]}]
    while True:
        response = client.models.generate_content(
            model="gemini-3.5-flash", contents=contents, config=config,
        )
        if not response.function_calls:
            break
        contents.append(response.candidates[0].content)
        parts = []
        for call in response.function_calls:
            # load_skill is answered by the run; your own functions by FUNCTIONS.
            # A loop of your own rather than automatic function calling, which
            # raises KeyError when the model asks for a function you did not pass.
            function = FUNCTIONS.get(call.name)
            parts.append(run.tool_result(call) or {"function_response": {
                "name": call.name, "id": call.id,
                "response": {"result": function(**(call.args or {})) if function
                             else f"There is no function named {call.name!r}."},
            }})
        contents.append({"role": "user", "parts": parts})
print(response.text)

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/aperivue-find-journal/SKILL.md

Give it to your agent

from pathlib import Path
from google import genai
from google.genai import types

client = genai.Client()
skill = Path(".agents/skills/aperivue-find-journal/SKILL.md").read_text()
response = client.models.generate_content(
    model="gemini-3.5-flash",
    contents="Hello!",
    config=types.GenerateContentConfig(system_instruction=f"You are a helpful agent.\n\n{skill}"),
)

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Gemini API docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[langchain]" langchain-openai
decimalai skills add aperivue-find-journal

Add it to your agent

from langchain.agents import create_agent
from decimalai.langchain import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = create_agent(
    "openai:gpt-5.4-mini",
    tools=[],                         # your tools; the middleware adds load_skill
    middleware=[support.middleware],  # your prompt, the skill list and load_skill
)
result = agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

Install

pip install "decimalai[langchain]" langchain-openai

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("aperivue-find-journal")
if result.exit_code:
    raise SystemExit(result.problems)

from langchain.agents import create_agent
from decimalai.langchain import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = create_agent(
    "openai:gpt-5.4-mini",
    tools=[],                         # your tools; the middleware adds load_skill
    middleware=[support.middleware],  # your prompt, the skill list and load_skill
)
result = agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/aperivue-find-journal/SKILL.md

Give it to your agent

from pathlib import Path
from langchain.agents import create_agent

skill = Path(".agents/skills/aperivue-find-journal/SKILL.md").read_text()
agent = create_agent("openai:gpt-5.4-mini", tools=[], system_prompt=f"You are a helpful agent.\n\n{skill}")
result = agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

LangChain docs

CrewAI's own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" "crewai>=1.15.27"
decimalai skills add aperivue-find-journal

Add it to your agent

import decimalai.crewai
from crewai import Agent, Crew, Task

agent = Agent(
    role="Support", goal="Help the customer", backstory="A support agent.",
    llm=llm,                               # your own CrewAI LLM
    skills=decimalai.crewai.skills(),      # the installed folder
    tools=decimalai.crewai.skill_tools(),  # reads a skill's files, runs its scripts
)
task = Task(description="Hello!", expected_output="an answer", agent=agent)
Crew(agents=[agent], tasks=[task]).kickoff()

The same install from Python, for a notebook or a setup script. CrewAI's own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" "crewai>=1.15.27"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("aperivue-find-journal")
if result.exit_code:
    raise SystemExit(result.problems)

import decimalai.crewai
from crewai import Agent, Crew, Task

agent = Agent(
    role="Support", goal="Help the customer", backstory="A support agent.",
    llm=llm,                               # your own CrewAI LLM
    skills=decimalai.crewai.skills(),      # the installed folder
    tools=decimalai.crewai.skill_tools(),  # reads a skill's files, runs its scripts
)
task = Task(description="Hello!", expected_output="an answer", agent=agent)
Crew(agents=[agent], tasks=[task]).kickoff()

No DecimalAI package. CrewAI's own loader reads the folder, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/aperivue-find-journal/SKILL.md

Give it to your agent

from pathlib import Path
from crewai import Agent, Crew, Task

agent = Agent(
    role="Support", goal="Help the customer", backstory="A support agent.",
    llm=llm,                         # your own CrewAI LLM
    skills=[Path(".agents/skills")],
)
task = Task(description="Hello!", expected_output="an answer", agent=agent)
Crew(agents=[agent], tasks=[task]).kickoff()

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

CrewAI docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[adk]"
decimalai skills add aperivue-find-journal

Add it to your agent

from decimalai.adk import DecimalAIPlugin, agent_config
from google.adk.agents import LlmAgent
from google.adk.apps import App

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = LlmAgent(
    name="support",          # ADK needs a Python identifier
    model="gemini-3.5-flash",
    instruction=support.instruction,  # your prompt, then the skill list
    tools=[*support.tools],           # your tools, then load_skill
)
# DecimalAIPlugin makes each invocation of runners built from this App one trace.
app = App(name="support", root_agent=agent, plugins=[DecimalAIPlugin()])

Prefer ADK's own loader? SkillToolset(skills=decimalai.adk.skills(), ...) reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

Install

pip install "decimalai[adk]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("aperivue-find-journal")
if result.exit_code:
    raise SystemExit(result.problems)

from decimalai.adk import DecimalAIPlugin, agent_config
from google.adk.agents import LlmAgent
from google.adk.apps import App

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = LlmAgent(
    name="support",          # ADK needs a Python identifier
    model="gemini-3.5-flash",
    instruction=support.instruction,  # your prompt, then the skill list
    tools=[*support.tools],           # your tools, then load_skill
)
# DecimalAIPlugin makes each invocation of runners built from this App one trace.
app = App(name="support", root_agent=agent, plugins=[DecimalAIPlugin()])

Prefer ADK's own loader? SkillToolset(skills=decimalai.adk.skills(), ...) reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/aperivue-find-journal/SKILL.md

Give it to your agent

from pathlib import Path
from google.adk.agents import LlmAgent

skill = Path(".agents/skills/aperivue-find-journal/SKILL.md").read_text()
agent = LlmAgent(
    name="support",
    model="gemini-3.5-flash",
    instruction=lambda context: f"You are a helpful agent.\n\n{skill}",
)

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Google ADK docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[pydantic-ai]"
decimalai skills add aperivue-find-journal

Add it to your agent

from pydantic_ai import Agent
from decimalai.pydantic_ai import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    "openai:gpt-4o-mini",
    name=support.name,
    tools=[],                 # your tools; the capability adds load_skill
    capabilities=[support],   # your prompt, the skill list and load_skill
)
# In a notebook or async code: result = await agent.run("Hello!")
result = agent.run_sync("Hello!")

On the Pydantic AI harness, decimalai.pydantic_ai_harness.skills(project) uses its own loader instead.

Install

pip install "decimalai[pydantic-ai]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("aperivue-find-journal")
if result.exit_code:
    raise SystemExit(result.problems)

from pydantic_ai import Agent
from decimalai.pydantic_ai import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    "openai:gpt-4o-mini",
    name=support.name,
    tools=[],                 # your tools; the capability adds load_skill
    capabilities=[support],   # your prompt, the skill list and load_skill
)
# In a notebook or async code: result = await agent.run("Hello!")
result = agent.run_sync("Hello!")

On the Pydantic AI harness, decimalai.pydantic_ai_harness.skills(project) uses its own loader instead.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/aperivue-find-journal/SKILL.md

Give it to your agent

from pathlib import Path
from pydantic_ai import Agent

skill = Path(".agents/skills/aperivue-find-journal/SKILL.md").read_text()
agent = Agent("openai:gpt-4o-mini", instructions=f"You are a helpful agent.\n\n{skill}")
# In a notebook or async code: result = await agent.run("Hello!")
result = agent.run_sync("Hello!")

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Pydantic AI docs

Deep Agents' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" deepagents
decimalai skills add aperivue-find-journal

Add it to your agent

import decimalai.deepagents
from deepagents import create_deep_agent

agent = create_deep_agent(model=model, **decimalai.deepagents.skills())
agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

The default backend reads files but has no shell. To run a skill's scripts, pass skills(backend=LocalShellBackend(...)).

The same install from Python, for a notebook or a setup script. Deep Agents' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" deepagents

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("aperivue-find-journal")
if result.exit_code:
    raise SystemExit(result.problems)

import decimalai.deepagents
from deepagents import create_deep_agent

agent = create_deep_agent(model=model, **decimalai.deepagents.skills())
agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

The default backend reads files but has no shell. To run a skill's scripts, pass skills(backend=LocalShellBackend(...)).

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/aperivue-find-journal/SKILL.md

Give it to your agent

from pathlib import Path
from deepagents import create_deep_agent

skill = Path(".agents/skills/aperivue-find-journal/SKILL.md").read_text()
agent = create_deep_agent(model=model, system_prompt=f"You are a helpful agent.\n\n{skill}")
agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Deep Agents docs

Its own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" agent-framework
decimalai skills add aperivue-find-journal

Add it to your agent

import asyncio

from agent_framework import Agent
from decimalai.agent_framework import skills

agent = Agent(client=client, instructions="You are a helpful agent.", context_providers=[skills()])
asyncio.run(agent.run("Hello!"))

It caches skills by default, so restart the process after decimalai skills update.

The same install from Python, for a notebook or a setup script. Its own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" agent-framework

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("aperivue-find-journal")
if result.exit_code:
    raise SystemExit(result.problems)

import asyncio

from agent_framework import Agent
from decimalai.agent_framework import skills

agent = Agent(client=client, instructions="You are a helpful agent.", context_providers=[skills()])
asyncio.run(agent.run("Hello!"))

It caches skills by default, so restart the process after decimalai skills update.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/aperivue-find-journal/SKILL.md

Give it to your agent

import asyncio
from pathlib import Path
from agent_framework import Agent

skill = Path(".agents/skills/aperivue-find-journal/SKILL.md").read_text()
agent = Agent(client=client, instructions=f"You are a helpful agent.\n\n{skill}")
asyncio.run(agent.run("Hello!"))

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Microsoft Agent Framework docs

Strands' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" strands-agents
decimalai skills add aperivue-find-journal

Add it to your agent

from decimalai.strands import skills
from strands import Agent
from strands.vended_tools import file_editor, shell

agent = Agent(
    model=model,                # always pass one: the default is Amazon Bedrock
    system_prompt="You are a helpful agent.",
    tools=[file_editor, shell],
    plugins=[skills()],
)
agent("Hello!")

Strands loads an agent's skills once, so build the agent again after decimalai skills update.

The same install from Python, for a notebook or a setup script. Strands' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" strands-agents

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("aperivue-find-journal")
if result.exit_code:
    raise SystemExit(result.problems)

from decimalai.strands import skills
from strands import Agent
from strands.vended_tools import file_editor, shell

agent = Agent(
    model=model,                # always pass one: the default is Amazon Bedrock
    system_prompt="You are a helpful agent.",
    tools=[file_editor, shell],
    plugins=[skills()],
)
agent("Hello!")

Strands loads an agent's skills once, so build the agent again after decimalai skills update.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/aperivue-find-journal/SKILL.md

Give it to your agent

from pathlib import Path
from strands import Agent

skill = Path(".agents/skills/aperivue-find-journal/SKILL.md").read_text()
agent = Agent(model=model, system_prompt=f"You are a helpful agent.\n\n{skill}")
agent("Hello!")

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Strands docs

Adds every file the skill has, pinned so you can update it. Cursor, Copilot, Cline and Warp read this folder by themselves.

pip install "decimalai>=0.15"
decimalai skills add aperivue-find-journal

No Python or account. Cursor, Copilot, Cline and Warp read this folder by themselves.

Save it into your project

curl -fsSL --create-dirs -o .agents/skills/aperivue-find-journal/SKILL.md https://app.decimal.ai/s/aperivue-find-journal/SKILL.md

Copy SKILL.md

Save it in your project, as

.agents/skills/aperivue-find-journal/SKILL.md

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Cursor and other editors docs

Fetch the file and give its text to your model as instructions. No account or package needed.

Get the file

curl -fsSL https://app.decimal.ai/s/aperivue-find-journal/SKILL.md

Read the summary as JSON

curl -fsSL https://app.decimal.ai/s/aperivue-find-journal.json

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Other setups docs

You don't need a DecimalAI account.

Version: v2 (v1 tested 8/24/2026)
Source: aperivue/medsci-skills ↗
License: MIT

Manage it in DecimalAI

Saved prompts and skills, pinned versions, and traces of this skill in your runs. DecimalAI does not run your agent.

Claude Code reads files from your project, so DecimalAI config does not apply there.

On Claude Agent SDK: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On OpenAI Agents: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On OpenAI SDK: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Anthropic: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Gemini API: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On LangChain: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On CrewAI: set DECIMAL_API_KEY and add decimalai.init(crewai=True) to record runs and skill use. The skill version stays in your repo.

On Google ADK: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Pydantic AI: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Deep Agents: set DECIMAL_API_KEY and add decimalai.init(langchain=True) to record runs and skill use. The skill version stays in your repo.

On Microsoft Agent Framework: set DECIMAL_API_KEY and add decimalai.init(otel=True, agent_name="support") to record runs and skill use. The skill version stays in your repo.

On Strands: set DECIMAL_API_KEY and add decimalai.init(otel=True, agent_name="support") to record runs and skill use. The skill version stays in your repo.

Editors read files from your project, so DecimalAI config does not apply there.

Anywhere else: record a use with decimalai.log_skill_activation() inside a trace.

Use this skill

SKILL.md

Find Journal Skill

Phase 1: Input Collection

Required Inputs

Abstract text or key findings summary
Study type: original research, meta-analysis, case report, technical note, review, letter, AI validation, diagnostic accuracy, etc.

Optional Inputs

Preferred tier: Q1 / Q1-Q2 / any (default: any)
OA preference: Full OA / Hybrid OK / No preference (default: no preference)
Field focus: radiology, medical AI, clinical specialty, methodology, education, general medicine
Journals to exclude: journals that have already rejected this manuscript

If only an abstract is given, infer the study type from it. When called from /write-paper or another skill, take the abstract and study type from the calling context and skip these questions.

Phase 2: Theme Extraction

From the abstract or key findings, extract: disease/condition; modality/technique; methodology (e.g., retrospective cohort, diagnostic accuracy, systematic review, RCT); population; and innovation type (new algorithm, clinical validation, workflow improvement, educational tool).

Phase 2.5: Acceptance-Readiness & Design-Ceiling Pre-flight

Editors screen importance/novelty and the design ceiling before scope fit (lack of novelty/importance is the top desk-rejection cause). This phase estimates that first filter, so the skill does not recommend a venue whose bar the design cannot clear. It is advisory, and its flags are not auto-fixable: the author decides.

2.5.1 Run the deterministic pre-flight (preferred)

If a manuscript or abstract file is available, run:

python3 ${CLAUDE_SKILL_DIR}/scripts/assess_acceptance_readiness.py <manuscript_or_abstract.md>
# add --json for a machine-readable report

It returns flags in four categories — DESIGN_CEILING, UNFIXABLE_DEFECT, IMPORTANCE_RISK, CLAIM_MISMATCH — and a ceiling verdict (NO LISTED SIGNAL MATCHED - NOT A DESIGN CLEARANCE … / IMPORTANCE-FRAMING REVIEW … / SPECIALTY / TOLERANT-VENUE OR DESIGN FIX … / HIGH-IMPACT VENUE UNLIKELY …).

The script reads UTF-8 markdown or plain text only. A .docx, .pdf, .doc or other non-text file exits 2 with no report ("No scan was run"): convert it (e.g. pandoc -t markdown) and rerun, or fall back to 2.5.2. It skips the References/Bibliography section.

Known limits. The scan matches listed phrases, line by line. It does not understand negation or context ("Unlike prior single-center studies…" still flags single-center), and it misses paraphrases ("one institution", "has not been externally validated", the same patients in training and test sets). So an empty result is not a clearance: apply the §3 taxonomy with judgement (as in 2.5.2) before treating feasibility as uncapped, and adjudicate each flag before it demotes a venue.

2.5.2 If only pasted text is available

Read ${CLAUDE_SKILL_DIR}/references/acceptance_signals_schema.md §3 (taxonomy and verdict bands), apply the same taxonomy to the pasted text with judgement, and assign the same ceiling verdict.

2.5.3 Carry the verdict forward

Record the ceiling verdict and its top flags for Phase 3.2 Axis 2 and for the Phase 4 Acceptance-Readiness Summary and Cascade plan. Do not block the recommendation on a ceiling: route to a venue the design can clear, or recommend a design change or presubmission inquiry.

Phase 3: Profile Loading and Matching (2-Pass)

3.1 Pass 1: Load Compact Profiles

Read both tiers and merge them into one profile set:

# Public (shipped with the skill)
${CLAUDE_SKILL_DIR}/references/journal_profiles/*.md

# User-local private (optional, may be empty or absent)
$HOME/.claude/private-journal-profiles/find-journal/*.md

On a filename collision the private copy wins (user override). If either directory is missing or empty, continue with the other and say which tier was unavailable. Count the profiles actually loaded after the merge and state the total in the output — never hard-code the count.

From each profile parse Scope, Scope Keywords, Article Types Accepted, Classification (Tier, OA, Field), Special Notes (includes a 1-line AI policy summary), and the optional Acceptance Signals block (format: ${CLAUDE_SKILL_DIR}/references/acceptance_signals_schema.md §1).

Do NOT read write-paper profiles in this pass — they are 4-5x larger and carry formatting detail irrelevant to matching.

3.2 Two-Axis Scoring (scope fit × acceptance feasibility)

Score each journal on two independent axes: scope fit ("does this journal cover my topic?") and acceptance feasibility ("can this manuscript's design and importance clear this journal's bar?"). Keep them separate — a perfect scope match can still desk-reject the design.

Axis 1 — Scope fit. Compute a composite scope-fit score:

Factor	Weight	Description
Scope alignment	40%	How well the manuscript's themes match the journal's scope and keywords
Study type fit	25%	Whether the journal accepts this article type and values this methodology
Tier match	20%	Alignment with user's preferred tier (if specified)
OA match	10%	Alignment with user's OA preference (if specified)
Special fit	5%	Bonus for unique alignment with journal's Special Notes

Axis 2 — Acceptance feasibility. Weigh the Phase 2.5 ceiling verdict against each journal's Acceptance Signals (selectivity band, desk-reject triggers, design expectations); for a profile without that block, use its Special Notes plus the Phase 2.5 taxonomy. Assign High / Medium / Low:

Low / ceiling-mismatch when the journal's bar is one the manuscript's ceiling cannot clear (e.g., a highly-selective venue that desk-rejects single-center surrogate-endpoint designs, and the manuscript is exactly that).
High when no ceiling signal collides with the journal's stated bar.

Report a band with reasons, NEVER an acceptance probability, because no acceptance-rate data source exists and a number would be false precision (schema §4).

3.3 Filtering

Before scoring, exclude journals on the user's exclusion list and journals that do not accept the manuscript's study type (e.g., a case report to a journal that only takes original research). If no journal survives, relax the filters — OA constraint first, then tier — and re-score.

3.4 Ranking

Rank primarily by the Axis-1 scope-fit score, then apply Axis 2:

Demote (or, if the mismatch is severe, drop below a better-feasibility peer) any journal whose acceptance feasibility is Low / ceiling-mismatch.
Never silently demote — always carry the reason so Phase 4 can surface it.
Select the top 5 by the feasibility-adjusted order. If a strong scope match is demoted for feasibility, still mention it in the comparison note with the mismatch spelled out (the author may choose to fix the design rather than change venue).

3.5 Pass 2: Enrich Top-5

For each top-5 journal, look for a detailed write-paper profile in both tiers (private wins on collision):

# Public
${CLAUDE_SKILL_DIR}/../write-paper/references/journal_profiles/{journal_filename}

# User-local private
$HOME/.claude/private-journal-profiles/write-paper/{journal_filename}

If found, take from it: manuscript types and word limits, abstract format, statistical reporting requirements, the full 5-field AI Writing Disclosure Policy, common rejection reasons, and Acceptance Signals (these sharpen the Axis-2 call and the cascade plan). If none is found or the directory is not accessible, use the compact profile only.

Phase 4: Output

Every journal fact you print (URLs, article types, OA model, AI policy) comes from the loaded profile or from the journal's own website; never invent journal metadata, an impact factor, an APC or a submission policy.

For each of the top 5 recommended journals, present:

### Rank [N]: [Journal Name] ([Tier])

**Scope fit:** [2-3 sentences explaining why this manuscript matches this journal's scope.
Reference specific keywords, disease areas, or methodological preferences from the profile.]

**Article types accepted:** [relevant types from profile]

**Open Access:** [Full OA / Hybrid / Subscription]

**Acceptance feasibility:** [High / Medium / Low] — [1 line: how the manuscript's
Phase 2.5 ceiling meets this journal's bar; spell out any mismatch, e.g., "scope fit
High, but this highly-selective venue desk-rejects single-center surrogate-endpoint
designs — add external validation or target a selective/accessible venue"]

**Homepage:** [URL]
**Author guidelines:** [URL]

**AI disclosure:** [Required / Recommended / Not specified] — [brief summary of permitted scope and disclosure location, if available in profile]

After all 5, add a 2-3 sentence comparison note on the key tradeoffs between the top choices (e.g., scope breadth vs. specialty depth, tier vs. acceptance feasibility). Then add the two blocks below, then the Mandatory Disclaimer.

Acceptance-Readiness Summary

---
### Acceptance-Readiness Summary

**Ceiling verdict:** [from Phase 2.5]
**Top flags:** [the 2-4 most consequential design-ceiling / unfixable / importance flags, each with its 1-line reason]
**Implication for venue tier:** [1-2 sentences — e.g., "An unfixable single-center +
surrogate-endpoint ceiling makes flagship venues unlikely without external validation;
the recommendations above are routed to venues this design can clear."]

_Advisory only — a risk band, not an acceptance prediction; flags are not auto-fixable._

Cascade plan

---
### Cascade plan (primary → reject-fallback)

1. **Primary:** [top recommendation] — [why first]
2. **If rejected:** [fallback 1] — [same-publisher transfer if applicable, else one tier
   down / different scope angle]. An editor's transfer offer within the same publisher
   is usually worth taking: the manuscript skips a fresh desk screen.
3. **Then:** [fallback 2]

[If the Phase 2.5 risk is IMPORTANCE rather than design, recommend a **presubmission
inquiry** to the primary target before full submission — it lets the editor quick-assess
contribution/fit and saves a desk-reject cycle.]

[If a confidential corresponding-author editor-bar overlay exists in
`$HOME/.claude/private-journal-profiles/find-journal/`, its notes have already been
merged into the per-journal feasibility calls above.]

Mandatory Disclaimer

Always append this disclaimer at the bottom of every recommendation output:

---
**Important Disclaimer**

Impact Factor, APC fees, acceptance rates, and turnaround times change frequently
and are subject to copyright restrictions. Please verify current values directly
at each journal's homepage before making your submission decision.

Recommended verification sources:
- Journal Citation Reports (JCR) via institutional access: for Impact Factor
- Journal homepage -> Author Guidelines: for current APC and formatting requirements
- Clarivate Master Journal List: for indexing status

Special Modes

Post-Rejection Mode

When the manuscript was rejected by a specific journal:

Exclude the rejecting journal.
Distinguish the rejection type — it changes the advice:
- Desk-reject (no peer review) — usually an importance/novelty or design-ceiling verdict, not a fixable-revision signal. Re-run Phase 2.5; if a ceiling or importance flag is present, the next same-tier venue will likely desk-reject again. Route one or two tiers down (or to a tolerant/accessible venue), or advise the design/importance fix first, and consider a presubmission inquiry.
- Post-peer-review reject — prefer a same-publisher transfer (Springer Nature Transfer Desk / Elsevier Article Transfer Service / Wiley / Nature Portfolio) that carries the referee reports; otherwise same tier or one down, with the fatal flaw addressed.
If rejected from Q1 other than by a ceiling/importance desk-reject, recommend a mix of Q1 (different scope angle) and strong Q2.
In each scope-fit explanation, note how the recommendation differs from the rejected journal's focus.
Suggest scope adjustments — or, when Phase 2.5 found a ceiling, design changes — that might improve feasibility for the new target.

Case Report Mode

When the study type is case report, prioritize journals known for valuing educational or rare cases. If fewer than 5 profiled journals accept case reports, say so and suggest the user consider case-report-specific journals outside the profile set.

Submission Directory Scaffolding

When the user selects a target journal, create submission/{journal_short}/ (lowercase with underscores, e.g., radiology_ai, european_radiology, ajr) and report the path so /write-paper Phase 8+ and /peer-review know where to write:

submission/
└── {journal_short}/          # e.g., radiology_ai/
    ├── cover_letter.md       # Generated by /write-paper Phase 8+
    ├── checklist.md          # Journal-specific submission checklist
    └── peer_review.md        # Generated by /peer-review (journal scope-aware)

About this skill

Automatic

Research pack

SkillSafety

✓ 3 of 3 passed

Code scan15 of 15 checks clean

0 critical · 0 warning · 0 info — scanner v5 — 10/3/2026

View 15 scanner checks

live_secretremote_code_executionreverse_shelldata_exfiltrationssrf_metadataagent_snoopinganti_refusaldestructive_commandsobfuscated_unicodeunicode_homoglyphopaque_blobsuspicious_urltool_overreachtrigger_abuseprompt_injection_phrasing

IntentSafe

LLM judge · does the skill do what it claims

ContentClean

LLM judge · policy & harmful-content review

Source

Imported

aperivue / medsci-skills

skills/find-journal/SKILL.md

View on GitHub ↗

License MITImported 10/3/2026Version v2Bundled 2 files · scripts

Illustrative Want to see what aperivue/find-journal would put in front of your model? Preview the rendered body and check its trigger phrases — no LLM call, no signup.

Related skills

Skills that do similar work, with their headline benchmark lift.

From the same source and nearby in the catalogue.

Ready to supercharge your AI agents?

SkillScore

Safety

What it changes

Track record

Use this skill

Find Journal Skill

Phase 1: Input Collection

Required Inputs

Optional Inputs

Phase 2: Theme Extraction

Phase 2.5: Acceptance-Readiness & Design-Ceiling Pre-flight

2.5.1 Run the deterministic pre-flight (preferred)

2.5.2 If only pasted text is available

2.5.3 Carry the verdict forward

Phase 3: Profile Loading and Matching (2-Pass)

3.1 Pass 1: Load Compact Profiles

3.2 Two-Axis Scoring (scope fit × acceptance feasibility)

3.3 Filtering

3.4 Ranking

3.5 Pass 2: Enrich Top-5

Phase 4: Output

Acceptance-Readiness Summary

Cascade plan

Mandatory Disclaimer

Special Modes

Post-Rejection Mode

Case Report Mode

Submission Directory Scaffolding

SkillSafety

Source

Related skills

More in the registry