Ready to supercharge your AI agents?

Install any skill in seconds. Free to start, no credit card required.

scVelo RNA Velocity · k-dense-ai | DecimalAI

Scienceby k-dense-ai

scVelo RNA Velocity

RNA velocity analysis with scVelo. Estimate cell state transitions from unspliced/spliced mRNA dynamics, infer trajectory directions, compute latent time, and identify driver genes in single-cell RNA-seq data. Complements Scanpy/scVI-tools for trajectory inference.

Never made a case worseMaintained

SkillScore

SkillScore95/100

Test results 95

Safety

3/3 safety checks passed

Code scan
Intent
Content

What it changes

82%95%of test cases passed +14 pts

Without skill18 of 22

With skill21 of 22

3 fixed18 passed either way1 still failing0 broke

Measured on gemini-3.6-flash8/9/2026v1 · latest is v2

This benchmark measured an earlier version of the skill.

Track record

Agent runs: 0; All time

See one task, with and without the skill

One test taskI need to quickly estimate RNA velocity vectors for an exploratory dataset of 50,000 cells in Python without waiting for full non-linear kinetic parameter optimization. Which model mode parameter value should I pass to the velocity calculation function?

Without the skillMissed

With the skillPassed

Same model, same task. Answers are capped and redacted.

Use this skill

Your agent runs on

Adds every file the skill has, pinned so you can update it. No account needed.

pip install "decimalai>=0.15"
decimalai skills add k-dense-ai-scvelo
claude --plugin-dir "$(git rev-parse --show-toplevel 2>/dev/null || pwd)/.agents"

The same install from Python, for a notebook or a setup script.

Install

pip install "decimalai>=0.15"

Add the skill

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("k-dense-ai-scvelo")
if result.exit_code:
    raise SystemExit(result.problems)

print("Added. Start Claude Code with the command below.")

Start Claude Code with it

claude --plugin-dir "$(git rev-parse --show-toplevel 2>/dev/null || pwd)/.agents"

Type these in a Claude Code session. No account or API key. It writes the skill and any files it bundles, and asks first when its safety rating isn't Passed.

Add the DecimalAI plugin, once

/plugin marketplace add decimal-labs/decimalai-claude-plugins
/plugin install decimalai@decimalai

Install this skill

/decimalai:install k-dense-ai-scvelo

The plugin needs python3 and curl on your machine.

No Python or account. Claude Code picks it up in its next session.

Save it into your project

curl -fsSL --create-dirs -o .claude/skills/k-dense-ai-scvelo/SKILL.md https://app.decimal.ai/s/k-dense-ai-scvelo/SKILL.md

Copy SKILL.md

Save it in your project, as

.claude/skills/k-dense-ai-scvelo/SKILL.md

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Claude Code docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[claude-agent-sdk]"
decimalai skills add k-dense-ai-scvelo

Add it to your agent

import asyncio

from claude_agent_sdk import ClaudeAgentOptions
from decimalai.claude_agent_sdk import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

async def main():
    question = "Hello!"
    async with support.run(question) as run:  # one user message, one run
        async for message in run.query(options=ClaudeAgentOptions(max_turns=6)):
            print(message)

# In a notebook or async code: await main()
asyncio.run(main())

Prefer its own loader? ClaudeAgentOptions(plugins=[skills_plugin()], skills="all") reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

The same install from Python, for a notebook or a setup script. agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[claude-agent-sdk]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("k-dense-ai-scvelo")
if result.exit_code:
    raise SystemExit(result.problems)

import asyncio

from claude_agent_sdk import ClaudeAgentOptions
from decimalai.claude_agent_sdk import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

async def main():
    question = "Hello!"
    async with support.run(question) as run:  # one user message, one run
        async for message in run.query(options=ClaudeAgentOptions(max_turns=6)):
            print(message)

# In a notebook or async code: await main()
asyncio.run(main())

Prefer its own loader? ClaudeAgentOptions(plugins=[skills_plugin()], skills="all") reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/k-dense-ai-scvelo/SKILL.md

Give it to your agent

import asyncio
from pathlib import Path
from claude_agent_sdk import ClaudeAgentOptions, query

skill = Path(".agents/skills/k-dense-ai-scvelo/SKILL.md").read_text()
options = ClaudeAgentOptions(system_prompt=f"You are a helpful agent.\n\n{skill}", max_turns=6)

async def main():
    async for message in query(prompt="Hello!", options=options):
        print(message)

# In a notebook or async code: await main()
asyncio.run(main())

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Claude Agent SDK docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[openai-agents]"
decimalai skills add k-dense-ai-scvelo

Add it to your agent

from agents import Agent, Runner
from decimalai.openai_agents import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    name=support.name,
    instructions=support.instructions,  # your prompt, then the skill list
    tools=[*support.tools],             # your tools, then load_skill
)
# In a notebook or async code: result = await Runner.run(agent, "Hello!")
result = Runner.run_sync(agent, "Hello!")

Using SandboxAgent? capabilities=[Shell(), decimalai.openai_agents.sandbox_skills()] points its own loader at the same folder.

Install

pip install "decimalai[openai-agents]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("k-dense-ai-scvelo")
if result.exit_code:
    raise SystemExit(result.problems)

from agents import Agent, Runner
from decimalai.openai_agents import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    name=support.name,
    instructions=support.instructions,  # your prompt, then the skill list
    tools=[*support.tools],             # your tools, then load_skill
)
# In a notebook or async code: result = await Runner.run(agent, "Hello!")
result = Runner.run_sync(agent, "Hello!")

Using SandboxAgent? capabilities=[Shell(), decimalai.openai_agents.sandbox_skills()] points its own loader at the same folder.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/k-dense-ai-scvelo/SKILL.md

Give it to your agent

from pathlib import Path
from agents import Agent, Runner

skill = Path(".agents/skills/k-dense-ai-scvelo/SKILL.md").read_text()
agent = Agent(name="support", instructions=f"You are a helpful agent.\n\n{skill}")
# In a notebook or async code: result = await Runner.run(agent, "Hello!")
result = Runner.run_sync(agent, "Hello!")

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

OpenAI Agents docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[openai]"
decimalai skills add k-dense-ai-scvelo

Add it to your agent

import json

from openai import OpenAI
from decimalai.openai import agent_config

client = OpenAI()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your tools, as Chat Completions takes them, and what answers each.
TOOLS = [{"type": "function", "function": {
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters": {"type": "object", "properties": {"order_id": {"type": "string"}},
                   "required": ["order_id"]},
}}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    # run.system is your prompt, then the skill list.
    messages = [{"role": "system", "content": run.system}, run.message]
    while True:
        reply = client.chat.completions.create(
            model="gpt-5.4-mini",
            messages=messages,
            tools=[*TOOLS, *run.tools],  # your tools, then load_skill
        ).choices[0].message
        messages.append(reply)
        if not reply.tool_calls:
            break
        for call in reply.tool_calls:
            # load_skill is answered by the run; your own tools by FUNCTIONS.
            function = FUNCTIONS.get(call.function.name)
            messages.append(run.tool_result(call) or {
                "role": "tool", "tool_call_id": call.id,
                "content": function(**json.loads(call.function.arguments)) if function
                else f"There is no tool named {call.function.name!r}.",
            })
print(reply.content)

# The Responses API takes run.response_tools instead of run.tools.

Install

pip install "decimalai[openai]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("k-dense-ai-scvelo")
if result.exit_code:
    raise SystemExit(result.problems)

import json

from openai import OpenAI
from decimalai.openai import agent_config

client = OpenAI()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your tools, as Chat Completions takes them, and what answers each.
TOOLS = [{"type": "function", "function": {
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters": {"type": "object", "properties": {"order_id": {"type": "string"}},
                   "required": ["order_id"]},
}}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    # run.system is your prompt, then the skill list.
    messages = [{"role": "system", "content": run.system}, run.message]
    while True:
        reply = client.chat.completions.create(
            model="gpt-5.4-mini",
            messages=messages,
            tools=[*TOOLS, *run.tools],  # your tools, then load_skill
        ).choices[0].message
        messages.append(reply)
        if not reply.tool_calls:
            break
        for call in reply.tool_calls:
            # load_skill is answered by the run; your own tools by FUNCTIONS.
            function = FUNCTIONS.get(call.function.name)
            messages.append(run.tool_result(call) or {
                "role": "tool", "tool_call_id": call.id,
                "content": function(**json.loads(call.function.arguments)) if function
                else f"There is no tool named {call.function.name!r}.",
            })
print(reply.content)

# The Responses API takes run.response_tools instead of run.tools.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/k-dense-ai-scvelo/SKILL.md

Give it to your agent

from pathlib import Path
from openai import OpenAI

client = OpenAI()
skill = Path(".agents/skills/k-dense-ai-scvelo/SKILL.md").read_text()
reply = client.chat.completions.create(
    model="gpt-5.4-mini",
    messages=[
        {"role": "system", "content": f"You are a helpful agent.\n\n{skill}"},
        {"role": "user", "content": "Hello!"},
    ],
).choices[0].message

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

OpenAI SDK docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[anthropic]"
decimalai skills add k-dense-ai-scvelo

Add it to your agent

import anthropic
from decimalai.anthropic import agent_config

client = anthropic.Anthropic()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

question = "Hello!"
with support.run(question) as run:  # one user message, one run
    answer = client.beta.messages.tool_runner(
        model="claude-haiku-5-5",
        max_tokens=4096,
        system=run.system,     # your prompt, then the skill list
        tools=[*run.tools],    # your tools, then load_skill
        messages=[{"role": "user", "content": question}],
    ).until_done()

Install

pip install "decimalai[anthropic]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("k-dense-ai-scvelo")
if result.exit_code:
    raise SystemExit(result.problems)

import anthropic
from decimalai.anthropic import agent_config

client = anthropic.Anthropic()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

question = "Hello!"
with support.run(question) as run:  # one user message, one run
    answer = client.beta.messages.tool_runner(
        model="claude-haiku-5-5",
        max_tokens=4096,
        system=run.system,     # your prompt, then the skill list
        tools=[*run.tools],    # your tools, then load_skill
        messages=[{"role": "user", "content": question}],
    ).until_done()

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/k-dense-ai-scvelo/SKILL.md

Give it to your agent

from pathlib import Path
import anthropic

client = anthropic.Anthropic()
skill = Path(".agents/skills/k-dense-ai-scvelo/SKILL.md").read_text()
reply = client.messages.create(
    model="claude-haiku-5-5",
    max_tokens=4096,
    system=f"You are a helpful agent.\n\n{skill}",
    messages=[{"role": "user", "content": "Hello!"}],
)

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Anthropic docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[google-genai]"
decimalai skills add k-dense-ai-scvelo

Add it to your agent

from google import genai
from google.genai import types
from decimalai.google_genai import agent_config

client = genai.Client()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your functions, as declarations for the model, and what answers each.
TOOLS = [{"function_declarations": [{
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters_json_schema": {"type": "object", "properties": {"order_id": {"type": "string"}},
                               "required": ["order_id"]},
}]}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    config = types.GenerateContentConfig(
        system_instruction=run.system,     # your prompt, then the skill list
        tools=[*TOOLS, *run.tool_params],  # your functions, then load_skill
    )
    contents = [{"role": "user", "parts": [{"text": run.message}]}]
    while True:
        response = client.models.generate_content(
            model="gemini-3.5-flash", contents=contents, config=config,
        )
        if not response.function_calls:
            break
        contents.append(response.candidates[0].content)
        parts = []
        for call in response.function_calls:
            # load_skill is answered by the run; your own functions by FUNCTIONS.
            # A loop of your own rather than automatic function calling, which
            # raises KeyError when the model asks for a function you did not pass.
            function = FUNCTIONS.get(call.name)
            parts.append(run.tool_result(call) or {"function_response": {
                "name": call.name, "id": call.id,
                "response": {"result": function(**(call.args or {})) if function
                             else f"There is no function named {call.name!r}."},
            }})
        contents.append({"role": "user", "parts": parts})
print(response.text)

Install

pip install "decimalai[google-genai]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("k-dense-ai-scvelo")
if result.exit_code:
    raise SystemExit(result.problems)

from google import genai
from google.genai import types
from decimalai.google_genai import agent_config

client = genai.Client()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your functions, as declarations for the model, and what answers each.
TOOLS = [{"function_declarations": [{
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters_json_schema": {"type": "object", "properties": {"order_id": {"type": "string"}},
                               "required": ["order_id"]},
}]}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    config = types.GenerateContentConfig(
        system_instruction=run.system,     # your prompt, then the skill list
        tools=[*TOOLS, *run.tool_params],  # your functions, then load_skill
    )
    contents = [{"role": "user", "parts": [{"text": run.message}]}]
    while True:
        response = client.models.generate_content(
            model="gemini-3.5-flash", contents=contents, config=config,
        )
        if not response.function_calls:
            break
        contents.append(response.candidates[0].content)
        parts = []
        for call in response.function_calls:
            # load_skill is answered by the run; your own functions by FUNCTIONS.
            # A loop of your own rather than automatic function calling, which
            # raises KeyError when the model asks for a function you did not pass.
            function = FUNCTIONS.get(call.name)
            parts.append(run.tool_result(call) or {"function_response": {
                "name": call.name, "id": call.id,
                "response": {"result": function(**(call.args or {})) if function
                             else f"There is no function named {call.name!r}."},
            }})
        contents.append({"role": "user", "parts": parts})
print(response.text)

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/k-dense-ai-scvelo/SKILL.md

Give it to your agent

from pathlib import Path
from google import genai
from google.genai import types

client = genai.Client()
skill = Path(".agents/skills/k-dense-ai-scvelo/SKILL.md").read_text()
response = client.models.generate_content(
    model="gemini-3.5-flash",
    contents="Hello!",
    config=types.GenerateContentConfig(system_instruction=f"You are a helpful agent.\n\n{skill}"),
)

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Gemini API docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[langchain]" langchain-openai
decimalai skills add k-dense-ai-scvelo

Add it to your agent

from langchain.agents import create_agent
from decimalai.langchain import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = create_agent(
    "openai:gpt-5.4-mini",
    tools=[],                         # your tools; the middleware adds load_skill
    middleware=[support.middleware],  # your prompt, the skill list and load_skill
)
result = agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

Install

pip install "decimalai[langchain]" langchain-openai

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("k-dense-ai-scvelo")
if result.exit_code:
    raise SystemExit(result.problems)

from langchain.agents import create_agent
from decimalai.langchain import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = create_agent(
    "openai:gpt-5.4-mini",
    tools=[],                         # your tools; the middleware adds load_skill
    middleware=[support.middleware],  # your prompt, the skill list and load_skill
)
result = agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/k-dense-ai-scvelo/SKILL.md

Give it to your agent

from pathlib import Path
from langchain.agents import create_agent

skill = Path(".agents/skills/k-dense-ai-scvelo/SKILL.md").read_text()
agent = create_agent("openai:gpt-5.4-mini", tools=[], system_prompt=f"You are a helpful agent.\n\n{skill}")
result = agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

LangChain docs

CrewAI's own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" "crewai>=1.15.27"
decimalai skills add k-dense-ai-scvelo

Add it to your agent

import decimalai.crewai
from crewai import Agent, Crew, Task

agent = Agent(
    role="Support", goal="Help the customer", backstory="A support agent.",
    llm=llm,                               # your own CrewAI LLM
    skills=decimalai.crewai.skills(),      # the installed folder
    tools=decimalai.crewai.skill_tools(),  # reads a skill's files, runs its scripts
)
task = Task(description="Hello!", expected_output="an answer", agent=agent)
Crew(agents=[agent], tasks=[task]).kickoff()

The same install from Python, for a notebook or a setup script. CrewAI's own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" "crewai>=1.15.27"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("k-dense-ai-scvelo")
if result.exit_code:
    raise SystemExit(result.problems)

import decimalai.crewai
from crewai import Agent, Crew, Task

agent = Agent(
    role="Support", goal="Help the customer", backstory="A support agent.",
    llm=llm,                               # your own CrewAI LLM
    skills=decimalai.crewai.skills(),      # the installed folder
    tools=decimalai.crewai.skill_tools(),  # reads a skill's files, runs its scripts
)
task = Task(description="Hello!", expected_output="an answer", agent=agent)
Crew(agents=[agent], tasks=[task]).kickoff()

No DecimalAI package. CrewAI's own loader reads the folder, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/k-dense-ai-scvelo/SKILL.md

Give it to your agent

from pathlib import Path
from crewai import Agent, Crew, Task

agent = Agent(
    role="Support", goal="Help the customer", backstory="A support agent.",
    llm=llm,                         # your own CrewAI LLM
    skills=[Path(".agents/skills")],
)
task = Task(description="Hello!", expected_output="an answer", agent=agent)
Crew(agents=[agent], tasks=[task]).kickoff()

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

CrewAI docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[adk]"
decimalai skills add k-dense-ai-scvelo

Add it to your agent

from decimalai.adk import DecimalAIPlugin, agent_config
from google.adk.agents import LlmAgent
from google.adk.apps import App

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = LlmAgent(
    name="support",          # ADK needs a Python identifier
    model="gemini-3.5-flash",
    instruction=support.instruction,  # your prompt, then the skill list
    tools=[*support.tools],           # your tools, then load_skill
)
# DecimalAIPlugin makes each invocation of runners built from this App one trace.
app = App(name="support", root_agent=agent, plugins=[DecimalAIPlugin()])

Prefer ADK's own loader? SkillToolset(skills=decimalai.adk.skills(), ...) reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

Install

pip install "decimalai[adk]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("k-dense-ai-scvelo")
if result.exit_code:
    raise SystemExit(result.problems)

from decimalai.adk import DecimalAIPlugin, agent_config
from google.adk.agents import LlmAgent
from google.adk.apps import App

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = LlmAgent(
    name="support",          # ADK needs a Python identifier
    model="gemini-3.5-flash",
    instruction=support.instruction,  # your prompt, then the skill list
    tools=[*support.tools],           # your tools, then load_skill
)
# DecimalAIPlugin makes each invocation of runners built from this App one trace.
app = App(name="support", root_agent=agent, plugins=[DecimalAIPlugin()])

Prefer ADK's own loader? SkillToolset(skills=decimalai.adk.skills(), ...) reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/k-dense-ai-scvelo/SKILL.md

Give it to your agent

from pathlib import Path
from google.adk.agents import LlmAgent

skill = Path(".agents/skills/k-dense-ai-scvelo/SKILL.md").read_text()
agent = LlmAgent(
    name="support",
    model="gemini-3.5-flash",
    instruction=lambda context: f"You are a helpful agent.\n\n{skill}",
)

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Google ADK docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[pydantic-ai]"
decimalai skills add k-dense-ai-scvelo

Add it to your agent

from pydantic_ai import Agent
from decimalai.pydantic_ai import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    "openai:gpt-4o-mini",
    name=support.name,
    tools=[],                 # your tools; the capability adds load_skill
    capabilities=[support],   # your prompt, the skill list and load_skill
)
# In a notebook or async code: result = await agent.run("Hello!")
result = agent.run_sync("Hello!")

On the Pydantic AI harness, decimalai.pydantic_ai_harness.skills(project) uses its own loader instead.

Install

pip install "decimalai[pydantic-ai]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("k-dense-ai-scvelo")
if result.exit_code:
    raise SystemExit(result.problems)

from pydantic_ai import Agent
from decimalai.pydantic_ai import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    "openai:gpt-4o-mini",
    name=support.name,
    tools=[],                 # your tools; the capability adds load_skill
    capabilities=[support],   # your prompt, the skill list and load_skill
)
# In a notebook or async code: result = await agent.run("Hello!")
result = agent.run_sync("Hello!")

On the Pydantic AI harness, decimalai.pydantic_ai_harness.skills(project) uses its own loader instead.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/k-dense-ai-scvelo/SKILL.md

Give it to your agent

from pathlib import Path
from pydantic_ai import Agent

skill = Path(".agents/skills/k-dense-ai-scvelo/SKILL.md").read_text()
agent = Agent("openai:gpt-4o-mini", instructions=f"You are a helpful agent.\n\n{skill}")
# In a notebook or async code: result = await agent.run("Hello!")
result = agent.run_sync("Hello!")

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Pydantic AI docs

Deep Agents' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" deepagents
decimalai skills add k-dense-ai-scvelo

Add it to your agent

import decimalai.deepagents
from deepagents import create_deep_agent

agent = create_deep_agent(model=model, **decimalai.deepagents.skills())
agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

The default backend reads files but has no shell. To run a skill's scripts, pass skills(backend=LocalShellBackend(...)).

The same install from Python, for a notebook or a setup script. Deep Agents' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" deepagents

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("k-dense-ai-scvelo")
if result.exit_code:
    raise SystemExit(result.problems)

import decimalai.deepagents
from deepagents import create_deep_agent

agent = create_deep_agent(model=model, **decimalai.deepagents.skills())
agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

The default backend reads files but has no shell. To run a skill's scripts, pass skills(backend=LocalShellBackend(...)).

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/k-dense-ai-scvelo/SKILL.md

Give it to your agent

from pathlib import Path
from deepagents import create_deep_agent

skill = Path(".agents/skills/k-dense-ai-scvelo/SKILL.md").read_text()
agent = create_deep_agent(model=model, system_prompt=f"You are a helpful agent.\n\n{skill}")
agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Deep Agents docs

Its own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" agent-framework
decimalai skills add k-dense-ai-scvelo

Add it to your agent

import asyncio

from agent_framework import Agent
from decimalai.agent_framework import skills

agent = Agent(client=client, instructions="You are a helpful agent.", context_providers=[skills()])
asyncio.run(agent.run("Hello!"))

It caches skills by default, so restart the process after decimalai skills update.

The same install from Python, for a notebook or a setup script. Its own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" agent-framework

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("k-dense-ai-scvelo")
if result.exit_code:
    raise SystemExit(result.problems)

import asyncio

from agent_framework import Agent
from decimalai.agent_framework import skills

agent = Agent(client=client, instructions="You are a helpful agent.", context_providers=[skills()])
asyncio.run(agent.run("Hello!"))

It caches skills by default, so restart the process after decimalai skills update.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/k-dense-ai-scvelo/SKILL.md

Give it to your agent

import asyncio
from pathlib import Path
from agent_framework import Agent

skill = Path(".agents/skills/k-dense-ai-scvelo/SKILL.md").read_text()
agent = Agent(client=client, instructions=f"You are a helpful agent.\n\n{skill}")
asyncio.run(agent.run("Hello!"))

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Microsoft Agent Framework docs

Strands' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" strands-agents
decimalai skills add k-dense-ai-scvelo

Add it to your agent

from decimalai.strands import skills
from strands import Agent
from strands.vended_tools import file_editor, shell

agent = Agent(
    model=model,                # always pass one: the default is Amazon Bedrock
    system_prompt="You are a helpful agent.",
    tools=[file_editor, shell],
    plugins=[skills()],
)
agent("Hello!")

Strands loads an agent's skills once, so build the agent again after decimalai skills update.

The same install from Python, for a notebook or a setup script. Strands' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" strands-agents

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("k-dense-ai-scvelo")
if result.exit_code:
    raise SystemExit(result.problems)

from decimalai.strands import skills
from strands import Agent
from strands.vended_tools import file_editor, shell

agent = Agent(
    model=model,                # always pass one: the default is Amazon Bedrock
    system_prompt="You are a helpful agent.",
    tools=[file_editor, shell],
    plugins=[skills()],
)
agent("Hello!")

Strands loads an agent's skills once, so build the agent again after decimalai skills update.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/k-dense-ai-scvelo/SKILL.md

Give it to your agent

from pathlib import Path
from strands import Agent

skill = Path(".agents/skills/k-dense-ai-scvelo/SKILL.md").read_text()
agent = Agent(model=model, system_prompt=f"You are a helpful agent.\n\n{skill}")
agent("Hello!")

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Strands docs

Adds every file the skill has, pinned so you can update it. Cursor, Copilot, Cline and Warp read this folder by themselves.

pip install "decimalai>=0.15"
decimalai skills add k-dense-ai-scvelo

No Python or account. Cursor, Copilot, Cline and Warp read this folder by themselves.

Save it into your project

curl -fsSL --create-dirs -o .agents/skills/k-dense-ai-scvelo/SKILL.md https://app.decimal.ai/s/k-dense-ai-scvelo/SKILL.md

Copy SKILL.md

Save it in your project, as

.agents/skills/k-dense-ai-scvelo/SKILL.md

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Cursor and other editors docs

Fetch the file and give its text to your model as instructions. No account or package needed.

Get the file

curl -fsSL https://app.decimal.ai/s/k-dense-ai-scvelo/SKILL.md

Read the summary as JSON

curl -fsSL https://app.decimal.ai/s/k-dense-ai-scvelo.json

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Other setups docs

You don't need a DecimalAI account.

Version: v2 (v1 tested 8/9/2026)
Source: k-dense-ai/scientific-agent-skills ↗
License: MIT

Manage it in DecimalAI

Saved prompts and skills, pinned versions, and traces of this skill in your runs. DecimalAI does not run your agent.

Claude Code reads files from your project, so DecimalAI config does not apply there.

On Claude Agent SDK: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On OpenAI Agents: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On OpenAI SDK: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Anthropic: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Gemini API: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On LangChain: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On CrewAI: set DECIMAL_API_KEY and add decimalai.init(crewai=True) to record runs and skill use. The skill version stays in your repo.

On Google ADK: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Pydantic AI: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Deep Agents: set DECIMAL_API_KEY and add decimalai.init(langchain=True) to record runs and skill use. The skill version stays in your repo.

On Microsoft Agent Framework: set DECIMAL_API_KEY and add decimalai.init(otel=True, agent_name="support") to record runs and skill use. The skill version stays in your repo.

On Strands: set DECIMAL_API_KEY and add decimalai.init(otel=True, agent_name="support") to record runs and skill use. The skill version stays in your repo.

Editors read files from your project, so DecimalAI config does not apply there.

Anywhere else: record a use with decimalai.log_skill_activation() inside a trace.

Use this skill

SKILL.md

scVelo RNA Velocity

When to use

Use for kinetic analysis of aligned spliced/unspliced RNA counts, directional trajectory hypotheses, gene-level phase portraits, and dynamical latent time. Use the model reference for assumptions, transition probabilities, and an optional CellRank handoff.

RNA velocity estimates an expression derivative under a model. Smooth arrows are not observed cell movement, lineage tracing, causal drivers, or proof of future fate. The dynamical estimator is not automatically more accurate than a steady-state estimator on every dataset.

Tested environment and compatibility

The maintained workflow targets scVelo 0.3.4, Scanpy 1.12.4, AnnData 0.13.4, NumPy 2.5.3, pandas 2.3.3, SciPy 1.18.1, Matplotlib 3.11.2, and loompy 3.0.8 on Python 3.13. Use an isolated environment:

uv venv --python 3.13 .venv-velocity
uv pip install --python .venv-velocity/bin/python \
  scvelo==0.3.4 scanpy==1.12.4 anndata==0.13.4 numpy==2.5.3 \
  pandas==2.3.3 scipy==1.18.1 matplotlib==3.11.2 loompy==3.0.8

The packages above were resolved from cache and tested in an isolated uv environment; shell paths above use POSIX syntax. Installation requires network access unless packages are cached. No API key is required.

Deterministic and dynamical models: native synthetic fitting, graphs, relative times, plots and H5AD round trips are tested on this stack.
Stochastic model: scVelo 0.3.4's default GLS scalar assignment fails with NumPy 2. Scanpy 1.12 requires NumPy 2, so installing numpy<2 beside current Scanpy is not a solution. A separately validated legacy Scanpy/NumPy environment is required; that legacy stack was not executed in this review. The helper rejects this combination before modifying data, without changing the model.
pandas 3: scVelo 0.3.4 dynamical fitting and some plots use operations no longer supported by pandas 3. Keep the explicit pandas pin.
The upstream stable tutorial still contains removed scv.read and older preprocessing calls. Check the 0.3.4 source when a tutorial disagrees with the installed API.

Input contract

Obtain spliced and unspliced counts from a velocity-aware quantifier. Keep quantifier/version, reference annotation, counting mode, sample IDs and cell barcode mapping. Upstream quantification is outside the bundled script.
Supply cells by genes matrices in adata.layers['spliced'] and adata.layers['unspliced'], with identical cell/gene ordering and unique IDs. Counts must be finite and nonnegative; fractional count estimates are allowed. Never use logged, scaled, residualized, or batch-corrected values as counts. Numerical inspection alone cannot establish that data are raw.
Inspect per-library/cluster coverage, doublets, ambient RNA, zero-count cells, and annotation compatibility before fitting. Preserve the original full-gene count file. Retained-gene backups do not preserve filtered-out genes.
Resolve barcode prefixes and gene identifiers explicitly when combining files. Do not silently strip library IDs, intersect away most cells, or make duplicated biological IDs unique without understanding why they repeat.

Read H5AD through AnnData. scVelo 0.3.4 has no scv.read or scv.DataFrame:

import anndata as ad
adata = ad.read_h5ad("velocity_counts.h5ad")

For legacy loom input use ad.io.read_loom('counts.loom', X_name='spliced', sparse=True). AnnData 0.13 deprecates loom; convert to H5AD for further work. Its layers[None] aliases X: do not delete it or iterate all layers as if every key were a string. The helper accesses only named velocity layers. Native loom reading and exact, reordered metadata alignment are covered by the tests; AnnData 0.13 write_loom is not used.

Run the maintained workflow

The bundled script accepts local files and never downloads a demonstration dataset on startup:

MPLBACKEND=Agg .venv-velocity/bin/python scripts/rna_velocity_workflow.py \
  velocity_counts.h5ad --mode dynamical --groupby clusters \
  --n-top-genes 2000 --n-neighbors 30 --n-jobs 1 --output-dir velocity_results

# Import a loom and align its raw counts to an existing annotation file:
MPLBACKEND=Agg .venv-velocity/bin/python scripts/rna_velocity_workflow.py \
  counts.loom --processed-h5ad annotated.h5ad --groupby clusters \
  --mode deterministic --output-dir velocity_check

Run these from the skill directory. Input filenames and biological annotations are illustrative; the same CLI and functions are tested on small generated kinetic fixtures. Omit --groupby when annotations are unavailable. Use --no-plots for analysis without computing UMAP.

The helper performs these steps:

Validate layers, IDs, model compatibility and grouping; refuse previously generated moments/velocity so preprocessing cannot silently run twice.
Back up retained raw layers as spliced_counts and unspliced_counts and rebuild X from raw spliced counts. Filter genes and normalize X and the two count layers on a linear scale.
Apply sc.pp.log1p only to X, select highly variable genes with Scanpy, and rebuild PCA and neighbors after subsetting. Reusing stale PCA/neighbors from an unrelated feature set can silently change the velocity model.
Compute Ms and Mu with scv.pp.moments(adata, n_neighbors=None) from the explicit Scanpy graph. Moments are dense: budget memory for multiple cells-by-genes arrays, not only the sparse input.
For dynamical mode, call recover_dynamics(var_names='all') on the selected genes before velocity(mode='dynamical'); otherwise fit the selected model. Require usable genes and a nonempty velocity graph.
Compute velocity coherence and velocity pseudotime; add latent time only for dynamical fits. Rank velocity-associated genes only with at least two groups and at least two cells per group. Record/warn about nonfinite or constant time/coherence outputs in uns['velocity_workflow']['diagnostics']; a constant pseudotime does not support a trajectory ordering. Ranking is exploratory.
For plots, recompute UMAP from the rebuilt graph, project velocities, save PNGs directly to the requested directory, then save H5AD with package versions and selected parameters. Existing labels remain annotations, not validated cell identities.

The Python function mutates its argument in place; pass adata.copy() to keep the original object. The CLI writes to output_dir/adata_velocity.h5ad. Version 2 changes the former helper's behavior deliberately: raw layer geometry is rebuilt, missing requested labels are errors, and plots/parallelism can be controlled explicitly. Runtime depends on cells, genes and fit difficulty; there is no universal 10–30 minute expectation.

Inspect the evidence before interpretation

After a dynamical run (dataset-specific gene selection is illustrative):

import pandas as pd
import scvelo as scv

# Candidate kinetic genes, not experimentally established drivers.
candidates = adata.var['fit_likelihood'].dropna().nlargest(6).index.tolist()
scv.pl.velocity(adata, var_names=candidates, basis='umap', show=False)

# This ranks group-associated velocities, not causal influence or condition DE.
scv.tl.rank_velocity_genes(adata, groupby='clusters', min_corr=0.3)
ranked = pd.DataFrame(adata.uns['rank_velocity_genes']['names'])

scv.tl.velocity_confidence(adata)
scv.pl.scatter(adata, color=['velocity_length', 'velocity_confidence'], show=False)

Inspect spliced-versus-unspliced phase portraits, coverage across induction and repression, fitted parameters, failed/NaN fits, and branch-specific kinetics. Check sensitivity to gene set, neighbors, subsampling and model assumptions. Use time-course labels, perturbations, lineage tracing or labeling experiments as independent directional evidence where available. A plausible UMAP alone cannot validate a fit, and tuning until arrows match a desired story is not a validation strategy.

There is no general minimum of 2,000 cells, universal unspliced fraction, or rule that root cells must have the highest unspliced/spliced ratio. Coverage of relevant kinetic states and measurement quality matter. Negative velocity can represent repression or model misspecification; it is not by itself evidence that layers were swapped.

Output interpretation

Field	Interpretation
`layers['velocity']`	Model-estimated derivative in processed gene-expression space
`var['velocity_genes']`	Genes selected for the velocity graph; distinct from all HVGs
`layers['Ms']`, `layers['Mu']`	Neighbor-averaged linear-scale spliced/unspliced expression
`layers['fit_t']`	Gene-specific fitted time coordinates, dynamical model only
`var['fit_alpha/beta/gamma']`	Fitted rates on the model's inferred scale; not calibrated physical rates
`var['fit_likelihood']`	Relative model-fit diagnostic; not a posterior probability of biological truth
`uns['velocity_graph']`	Sparse positive cosine correlations for candidate transitions; not row-stochastic
`obsm['velocity_umap']`	Projected vectors, only after embedding computation/plotting
`obs['velocity_pseudotime']`	Graph-based relative ordering
`obs['latent_time']`	Coupled dynamical ordering; normally scaled 0–1, not elapsed hours
`obs['velocity_length']`	Processed-space vector magnitude; not physical cell speed
`obs['velocity_confidence']`	Neighbor velocity coherence, not calibrated uncertainty

For fate probabilities use an explicitly normalized transition kernel and a validated terminal-state definition; see the optional CellRank example in the reference. PAGA requires optional igraph and compatible Scanpy internals; it is not part of the tested core workflow or a substitute for fate inference.

Troubleshooting

Problem	Action
Missing or mismatched layers	Revisit quantification and explicit ID alignment; X cannot substitute for unspliced counts
Very few velocity genes	Inspect depth, state coverage and phase portraits before altering thresholds
Smooth but implausible arrows	Check model assumptions, batch geometry and individual genes; compare independent evidence
Nonfinite fit or empty graph	Stop interpretation and investigate degenerate features/coverage
Excessive memory or fitting time	Use a justified gene set and `n_jobs=1`; account for dense moments and fit arrays
Stochastic failure on NumPy 2	Use a separately validated compatible legacy stack or explicitly reconsider the model
pandas `unique` error in fit/plot	Use the tested pandas 2.3.3 pin

Sources and verification scope

Reviewed 2026-10-01 against the released source, API, kinetic-model caveats, and AnnData loom reader. The main paper is Bergen et al., 2020. Synthetic execution tests verify software contracts and file/figure production; they do not establish biological accuracy, identifiability or dataset-specific parameter recovery. Optional CellRank/PAGA analyses remain source-reviewed, illustrative extensions. No authenticated remote service is used.

About this skill

Automatic

Data Analyst pack

SkillSafety

✓ 3 of 3 passed

Code scan15 of 15 checks clean

0 critical · 0 warning · 0 info — scanner v5 — 10/8/2026

View 15 scanner checks

live_secretremote_code_executionreverse_shelldata_exfiltrationssrf_metadataagent_snoopinganti_refusaldestructive_commandsobfuscated_unicodeunicode_homoglyphopaque_blobsuspicious_urltool_overreachtrigger_abuseprompt_injection_phrasing

IntentSafe

LLM judge · does the skill do what it claims

ContentClean

LLM judge · policy & harmful-content review

Source

Imported

k-dense-ai / scientific-agent-skills

skills/scvelo/SKILL.md

View on GitHub ↗

License BSD-3-ClauseImported 10/8/2026Version v2Bundled 2 files · scripts

Illustrative Want to see what k-dense-ai/scvelo would put in front of your model? Preview the rendered body and check its trigger phrases — no LLM call, no signup.

Other skills for the same job

Published skills whose descriptions closely match this one, with their headline benchmark lift.

Related skills

Skills that do similar work, with their headline benchmark lift.

From the same source and nearby in the catalogue.

Ready to supercharge your AI agents?

SkillScore

Safety

What it changes

Track record

Use this skill

scVelo RNA Velocity

When to use

Tested environment and compatibility

Input contract

Run the maintained workflow

Inspect the evidence before interpretation

Output interpretation

Troubleshooting

Sources and verification scope

SkillSafety

Source

Other skills for the same job

Related skills

More in the registry