Ready to supercharge your AI agents?

Install any skill in seconds. Free to start, no credit card required.

Write a manual · rohitg00 | DecimalAI

Documentationby rohitg00

Write a manual

Writes a long technical manual that explains one subject at one pinned version, from its purpose to each request and response. Every listing comes from an offline capture, every claim traces to a ranked source, and an audit must report TOTAL 0.

Maintained

SkillScore

SkillScore95/100

Test results 95

Safety

3/3 safety checks passed

Code scan
Intent
Content

What it changes

14%95%of test cases passed +82 pts

Without skill3 of 22

With skill21 of 22

19 fixed2 passed either way0 still failing1 broke

Measured on gemini-3.8-flash11/2/2026v2

Track record

Agent runs: 0; All time

See one task, with and without the skill

One test taskShow how to format a snippet of an SSE event stream from 'capture/out/events.sse' where ten repetitive heartbeat lines in the middle are omitted. The title is 'Heartbeat stream'. Show the raw block markup.

Without the skillMissed

With the skillPassed

Same model, same task. Answers are capped and redacted.

Use this skill

Your agent runs on

Adds every file the skill has, pinned so you can update it. No account needed.

pip install "decimalai>=0.15"
decimalai skills add rohitg00-write-manual
claude --plugin-dir "$(git rev-parse --show-toplevel 2>/dev/null || pwd)/.agents"

The same install from Python, for a notebook or a setup script.

Install

pip install "decimalai>=0.15"

Add the skill

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("rohitg00-write-manual")
if result.exit_code:
    raise SystemExit(result.problems)

print("Added. Start Claude Code with the command below.")

Start Claude Code with it

claude --plugin-dir "$(git rev-parse --show-toplevel 2>/dev/null || pwd)/.agents"

Type these in a Claude Code session. No account or API key. It writes the skill and any files it bundles, and asks first when its safety rating isn't Passed.

Add the DecimalAI plugin, once

/plugin marketplace add decimal-labs/decimalai-claude-plugins
/plugin install decimalai@decimalai

Install this skill

/decimalai:install rohitg00-write-manual

The plugin needs python3 and curl on your machine.

No Python or account. Claude Code picks it up in its next session.

Save it into your project

curl -fsSL --create-dirs -o .claude/skills/rohitg00-write-manual/SKILL.md https://app.decimal.ai/s/rohitg00-write-manual/SKILL.md

Copy SKILL.md

Save it in your project, as

.claude/skills/rohitg00-write-manual/SKILL.md

This gets SKILL.md only. The skill's 6 other files are not included.

Other ways to add it

Claude Code docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[claude-agent-sdk]"
decimalai skills add rohitg00-write-manual

Add it to your agent

import asyncio

from claude_agent_sdk import ClaudeAgentOptions
from decimalai.claude_agent_sdk import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

async def main():
    question = "Hello!"
    async with support.run(question) as run:  # one user message, one run
        async for message in run.query(options=ClaudeAgentOptions(max_turns=6)):
            print(message)

# In a notebook or async code: await main()
asyncio.run(main())

Prefer its own loader? ClaudeAgentOptions(plugins=[skills_plugin()], skills="all") reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

The same install from Python, for a notebook or a setup script. agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[claude-agent-sdk]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("rohitg00-write-manual")
if result.exit_code:
    raise SystemExit(result.problems)

import asyncio

from claude_agent_sdk import ClaudeAgentOptions
from decimalai.claude_agent_sdk import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

async def main():
    question = "Hello!"
    async with support.run(question) as run:  # one user message, one run
        async for message in run.query(options=ClaudeAgentOptions(max_turns=6)):
            print(message)

# In a notebook or async code: await main()
asyncio.run(main())

Prefer its own loader? ClaudeAgentOptions(plugins=[skills_plugin()], skills="all") reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/rohitg00-write-manual/SKILL.md

Give it to your agent

import asyncio
from pathlib import Path
from claude_agent_sdk import ClaudeAgentOptions, query

skill = Path(".agents/skills/rohitg00-write-manual/SKILL.md").read_text()
options = ClaudeAgentOptions(system_prompt=f"You are a helpful agent.\n\n{skill}", max_turns=6)

async def main():
    async for message in query(prompt="Hello!", options=options):
        print(message)

# In a notebook or async code: await main()
asyncio.run(main())

This gets SKILL.md only. The skill's 6 other files are not included.

Other ways to add it

Claude Agent SDK docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[openai-agents]"
decimalai skills add rohitg00-write-manual

Add it to your agent

from agents import Agent, Runner
from decimalai.openai_agents import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    name=support.name,
    instructions=support.instructions,  # your prompt, then the skill list
    tools=[*support.tools],             # your tools, then load_skill
)
# In a notebook or async code: result = await Runner.run(agent, "Hello!")
result = Runner.run_sync(agent, "Hello!")

Using SandboxAgent? capabilities=[Shell(), decimalai.openai_agents.sandbox_skills()] points its own loader at the same folder.

Install

pip install "decimalai[openai-agents]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("rohitg00-write-manual")
if result.exit_code:
    raise SystemExit(result.problems)

from agents import Agent, Runner
from decimalai.openai_agents import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    name=support.name,
    instructions=support.instructions,  # your prompt, then the skill list
    tools=[*support.tools],             # your tools, then load_skill
)
# In a notebook or async code: result = await Runner.run(agent, "Hello!")
result = Runner.run_sync(agent, "Hello!")

Using SandboxAgent? capabilities=[Shell(), decimalai.openai_agents.sandbox_skills()] points its own loader at the same folder.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/rohitg00-write-manual/SKILL.md

Give it to your agent

from pathlib import Path
from agents import Agent, Runner

skill = Path(".agents/skills/rohitg00-write-manual/SKILL.md").read_text()
agent = Agent(name="support", instructions=f"You are a helpful agent.\n\n{skill}")
# In a notebook or async code: result = await Runner.run(agent, "Hello!")
result = Runner.run_sync(agent, "Hello!")

This gets SKILL.md only. The skill's 6 other files are not included.

Other ways to add it

OpenAI Agents docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[openai]"
decimalai skills add rohitg00-write-manual

Add it to your agent

import json

from openai import OpenAI
from decimalai.openai import agent_config

client = OpenAI()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your tools, as Chat Completions takes them, and what answers each.
TOOLS = [{"type": "function", "function": {
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters": {"type": "object", "properties": {"order_id": {"type": "string"}},
                   "required": ["order_id"]},
}}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    # run.system is your prompt, then the skill list.
    messages = [{"role": "system", "content": run.system}, run.message]
    while True:
        reply = client.chat.completions.create(
            model="gpt-5.4-mini",
            messages=messages,
            tools=[*TOOLS, *run.tools],  # your tools, then load_skill
        ).choices[0].message
        messages.append(reply)
        if not reply.tool_calls:
            break
        for call in reply.tool_calls:
            # load_skill is answered by the run; your own tools by FUNCTIONS.
            function = FUNCTIONS.get(call.function.name)
            messages.append(run.tool_result(call) or {
                "role": "tool", "tool_call_id": call.id,
                "content": function(**json.loads(call.function.arguments)) if function
                else f"There is no tool named {call.function.name!r}.",
            })
print(reply.content)

# The Responses API takes run.response_tools instead of run.tools.

Install

pip install "decimalai[openai]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("rohitg00-write-manual")
if result.exit_code:
    raise SystemExit(result.problems)

import json

from openai import OpenAI
from decimalai.openai import agent_config

client = OpenAI()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your tools, as Chat Completions takes them, and what answers each.
TOOLS = [{"type": "function", "function": {
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters": {"type": "object", "properties": {"order_id": {"type": "string"}},
                   "required": ["order_id"]},
}}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    # run.system is your prompt, then the skill list.
    messages = [{"role": "system", "content": run.system}, run.message]
    while True:
        reply = client.chat.completions.create(
            model="gpt-5.4-mini",
            messages=messages,
            tools=[*TOOLS, *run.tools],  # your tools, then load_skill
        ).choices[0].message
        messages.append(reply)
        if not reply.tool_calls:
            break
        for call in reply.tool_calls:
            # load_skill is answered by the run; your own tools by FUNCTIONS.
            function = FUNCTIONS.get(call.function.name)
            messages.append(run.tool_result(call) or {
                "role": "tool", "tool_call_id": call.id,
                "content": function(**json.loads(call.function.arguments)) if function
                else f"There is no tool named {call.function.name!r}.",
            })
print(reply.content)

# The Responses API takes run.response_tools instead of run.tools.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/rohitg00-write-manual/SKILL.md

Give it to your agent

from pathlib import Path
from openai import OpenAI

client = OpenAI()
skill = Path(".agents/skills/rohitg00-write-manual/SKILL.md").read_text()
reply = client.chat.completions.create(
    model="gpt-5.4-mini",
    messages=[
        {"role": "system", "content": f"You are a helpful agent.\n\n{skill}"},
        {"role": "user", "content": "Hello!"},
    ],
).choices[0].message

This gets SKILL.md only. The skill's 6 other files are not included.

Other ways to add it

OpenAI SDK docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[anthropic]"
decimalai skills add rohitg00-write-manual

Add it to your agent

import anthropic
from decimalai.anthropic import agent_config

client = anthropic.Anthropic()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

question = "Hello!"
with support.run(question) as run:  # one user message, one run
    answer = client.beta.messages.tool_runner(
        model="claude-haiku-5-5",
        max_tokens=4096,
        system=run.system,     # your prompt, then the skill list
        tools=[*run.tools],    # your tools, then load_skill
        messages=[{"role": "user", "content": question}],
    ).until_done()

Install

pip install "decimalai[anthropic]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("rohitg00-write-manual")
if result.exit_code:
    raise SystemExit(result.problems)

import anthropic
from decimalai.anthropic import agent_config

client = anthropic.Anthropic()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

question = "Hello!"
with support.run(question) as run:  # one user message, one run
    answer = client.beta.messages.tool_runner(
        model="claude-haiku-5-5",
        max_tokens=4096,
        system=run.system,     # your prompt, then the skill list
        tools=[*run.tools],    # your tools, then load_skill
        messages=[{"role": "user", "content": question}],
    ).until_done()

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/rohitg00-write-manual/SKILL.md

Give it to your agent

from pathlib import Path
import anthropic

client = anthropic.Anthropic()
skill = Path(".agents/skills/rohitg00-write-manual/SKILL.md").read_text()
reply = client.messages.create(
    model="claude-haiku-5-5",
    max_tokens=4096,
    system=f"You are a helpful agent.\n\n{skill}",
    messages=[{"role": "user", "content": "Hello!"}],
)

This gets SKILL.md only. The skill's 6 other files are not included.

Other ways to add it

Anthropic docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[google-genai]"
decimalai skills add rohitg00-write-manual

Add it to your agent

from google import genai
from google.genai import types
from decimalai.google_genai import agent_config

client = genai.Client()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your functions, as declarations for the model, and what answers each.
TOOLS = [{"function_declarations": [{
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters_json_schema": {"type": "object", "properties": {"order_id": {"type": "string"}},
                               "required": ["order_id"]},
}]}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    config = types.GenerateContentConfig(
        system_instruction=run.system,     # your prompt, then the skill list
        tools=[*TOOLS, *run.tool_params],  # your functions, then load_skill
    )
    contents = [{"role": "user", "parts": [{"text": run.message}]}]
    while True:
        response = client.models.generate_content(
            model="gemini-3.5-flash", contents=contents, config=config,
        )
        if not response.function_calls:
            break
        contents.append(response.candidates[0].content)
        parts = []
        for call in response.function_calls:
            # load_skill is answered by the run; your own functions by FUNCTIONS.
            # A loop of your own rather than automatic function calling, which
            # raises KeyError when the model asks for a function you did not pass.
            function = FUNCTIONS.get(call.name)
            parts.append(run.tool_result(call) or {"function_response": {
                "name": call.name, "id": call.id,
                "response": {"result": function(**(call.args or {})) if function
                             else f"There is no function named {call.name!r}."},
            }})
        contents.append({"role": "user", "parts": parts})
print(response.text)

Install

pip install "decimalai[google-genai]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("rohitg00-write-manual")
if result.exit_code:
    raise SystemExit(result.problems)

from google import genai
from google.genai import types
from decimalai.google_genai import agent_config

client = genai.Client()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your functions, as declarations for the model, and what answers each.
TOOLS = [{"function_declarations": [{
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters_json_schema": {"type": "object", "properties": {"order_id": {"type": "string"}},
                               "required": ["order_id"]},
}]}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    config = types.GenerateContentConfig(
        system_instruction=run.system,     # your prompt, then the skill list
        tools=[*TOOLS, *run.tool_params],  # your functions, then load_skill
    )
    contents = [{"role": "user", "parts": [{"text": run.message}]}]
    while True:
        response = client.models.generate_content(
            model="gemini-3.5-flash", contents=contents, config=config,
        )
        if not response.function_calls:
            break
        contents.append(response.candidates[0].content)
        parts = []
        for call in response.function_calls:
            # load_skill is answered by the run; your own functions by FUNCTIONS.
            # A loop of your own rather than automatic function calling, which
            # raises KeyError when the model asks for a function you did not pass.
            function = FUNCTIONS.get(call.name)
            parts.append(run.tool_result(call) or {"function_response": {
                "name": call.name, "id": call.id,
                "response": {"result": function(**(call.args or {})) if function
                             else f"There is no function named {call.name!r}."},
            }})
        contents.append({"role": "user", "parts": parts})
print(response.text)

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/rohitg00-write-manual/SKILL.md

Give it to your agent

from pathlib import Path
from google import genai
from google.genai import types

client = genai.Client()
skill = Path(".agents/skills/rohitg00-write-manual/SKILL.md").read_text()
response = client.models.generate_content(
    model="gemini-3.5-flash",
    contents="Hello!",
    config=types.GenerateContentConfig(system_instruction=f"You are a helpful agent.\n\n{skill}"),
)

This gets SKILL.md only. The skill's 6 other files are not included.

Other ways to add it

Gemini API docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[langchain]" langchain-openai
decimalai skills add rohitg00-write-manual

Add it to your agent

from langchain.agents import create_agent
from decimalai.langchain import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = create_agent(
    "openai:gpt-5.4-mini",
    tools=[],                         # your tools; the middleware adds load_skill
    middleware=[support.middleware],  # your prompt, the skill list and load_skill
)
result = agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

Install

pip install "decimalai[langchain]" langchain-openai

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("rohitg00-write-manual")
if result.exit_code:
    raise SystemExit(result.problems)

from langchain.agents import create_agent
from decimalai.langchain import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = create_agent(
    "openai:gpt-5.4-mini",
    tools=[],                         # your tools; the middleware adds load_skill
    middleware=[support.middleware],  # your prompt, the skill list and load_skill
)
result = agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/rohitg00-write-manual/SKILL.md

Give it to your agent

from pathlib import Path
from langchain.agents import create_agent

skill = Path(".agents/skills/rohitg00-write-manual/SKILL.md").read_text()
agent = create_agent("openai:gpt-5.4-mini", tools=[], system_prompt=f"You are a helpful agent.\n\n{skill}")
result = agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

This gets SKILL.md only. The skill's 6 other files are not included.

Other ways to add it

LangChain docs

CrewAI's own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" "crewai>=1.15.27"
decimalai skills add rohitg00-write-manual

Add it to your agent

import decimalai.crewai
from crewai import Agent, Crew, Task

agent = Agent(
    role="Support", goal="Help the customer", backstory="A support agent.",
    llm=llm,                               # your own CrewAI LLM
    skills=decimalai.crewai.skills(),      # the installed folder
    tools=decimalai.crewai.skill_tools(),  # reads a skill's files, runs its scripts
)
task = Task(description="Hello!", expected_output="an answer", agent=agent)
Crew(agents=[agent], tasks=[task]).kickoff()

The same install from Python, for a notebook or a setup script. CrewAI's own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" "crewai>=1.15.27"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("rohitg00-write-manual")
if result.exit_code:
    raise SystemExit(result.problems)

import decimalai.crewai
from crewai import Agent, Crew, Task

agent = Agent(
    role="Support", goal="Help the customer", backstory="A support agent.",
    llm=llm,                               # your own CrewAI LLM
    skills=decimalai.crewai.skills(),      # the installed folder
    tools=decimalai.crewai.skill_tools(),  # reads a skill's files, runs its scripts
)
task = Task(description="Hello!", expected_output="an answer", agent=agent)
Crew(agents=[agent], tasks=[task]).kickoff()

No DecimalAI package. CrewAI's own loader reads the folder, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/rohitg00-write-manual/SKILL.md

Give it to your agent

from pathlib import Path
from crewai import Agent, Crew, Task

agent = Agent(
    role="Support", goal="Help the customer", backstory="A support agent.",
    llm=llm,                         # your own CrewAI LLM
    skills=[Path(".agents/skills")],
)
task = Task(description="Hello!", expected_output="an answer", agent=agent)
Crew(agents=[agent], tasks=[task]).kickoff()

This gets SKILL.md only. The skill's 6 other files are not included.

Other ways to add it

CrewAI docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[adk]"
decimalai skills add rohitg00-write-manual

Add it to your agent

from decimalai.adk import DecimalAIPlugin, agent_config
from google.adk.agents import LlmAgent
from google.adk.apps import App

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = LlmAgent(
    name="support",          # ADK needs a Python identifier
    model="gemini-3.5-flash",
    instruction=support.instruction,  # your prompt, then the skill list
    tools=[*support.tools],           # your tools, then load_skill
)
# DecimalAIPlugin makes each invocation of runners built from this App one trace.
app = App(name="support", root_agent=agent, plugins=[DecimalAIPlugin()])

Prefer ADK's own loader? SkillToolset(skills=decimalai.adk.skills(), ...) reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

Install

pip install "decimalai[adk]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("rohitg00-write-manual")
if result.exit_code:
    raise SystemExit(result.problems)

from decimalai.adk import DecimalAIPlugin, agent_config
from google.adk.agents import LlmAgent
from google.adk.apps import App

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = LlmAgent(
    name="support",          # ADK needs a Python identifier
    model="gemini-3.5-flash",
    instruction=support.instruction,  # your prompt, then the skill list
    tools=[*support.tools],           # your tools, then load_skill
)
# DecimalAIPlugin makes each invocation of runners built from this App one trace.
app = App(name="support", root_agent=agent, plugins=[DecimalAIPlugin()])

Prefer ADK's own loader? SkillToolset(skills=decimalai.adk.skills(), ...) reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/rohitg00-write-manual/SKILL.md

Give it to your agent

from pathlib import Path
from google.adk.agents import LlmAgent

skill = Path(".agents/skills/rohitg00-write-manual/SKILL.md").read_text()
agent = LlmAgent(
    name="support",
    model="gemini-3.5-flash",
    instruction=lambda context: f"You are a helpful agent.\n\n{skill}",
)

This gets SKILL.md only. The skill's 6 other files are not included.

Other ways to add it

Google ADK docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[pydantic-ai]"
decimalai skills add rohitg00-write-manual

Add it to your agent

from pydantic_ai import Agent
from decimalai.pydantic_ai import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    "openai:gpt-4o-mini",
    name=support.name,
    tools=[],                 # your tools; the capability adds load_skill
    capabilities=[support],   # your prompt, the skill list and load_skill
)
# In a notebook or async code: result = await agent.run("Hello!")
result = agent.run_sync("Hello!")

On the Pydantic AI harness, decimalai.pydantic_ai_harness.skills(project) uses its own loader instead.

Install

pip install "decimalai[pydantic-ai]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("rohitg00-write-manual")
if result.exit_code:
    raise SystemExit(result.problems)

from pydantic_ai import Agent
from decimalai.pydantic_ai import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    "openai:gpt-4o-mini",
    name=support.name,
    tools=[],                 # your tools; the capability adds load_skill
    capabilities=[support],   # your prompt, the skill list and load_skill
)
# In a notebook or async code: result = await agent.run("Hello!")
result = agent.run_sync("Hello!")

On the Pydantic AI harness, decimalai.pydantic_ai_harness.skills(project) uses its own loader instead.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/rohitg00-write-manual/SKILL.md

Give it to your agent

from pathlib import Path
from pydantic_ai import Agent

skill = Path(".agents/skills/rohitg00-write-manual/SKILL.md").read_text()
agent = Agent("openai:gpt-4o-mini", instructions=f"You are a helpful agent.\n\n{skill}")
# In a notebook or async code: result = await agent.run("Hello!")
result = agent.run_sync("Hello!")

This gets SKILL.md only. The skill's 6 other files are not included.

Other ways to add it

Pydantic AI docs

Deep Agents' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" deepagents
decimalai skills add rohitg00-write-manual

Add it to your agent

import decimalai.deepagents
from deepagents import create_deep_agent

agent = create_deep_agent(model=model, **decimalai.deepagents.skills())
agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

The default backend reads files but has no shell. To run a skill's scripts, pass skills(backend=LocalShellBackend(...)).

The same install from Python, for a notebook or a setup script. Deep Agents' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" deepagents

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("rohitg00-write-manual")
if result.exit_code:
    raise SystemExit(result.problems)

import decimalai.deepagents
from deepagents import create_deep_agent

agent = create_deep_agent(model=model, **decimalai.deepagents.skills())
agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

The default backend reads files but has no shell. To run a skill's scripts, pass skills(backend=LocalShellBackend(...)).

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/rohitg00-write-manual/SKILL.md

Give it to your agent

from pathlib import Path
from deepagents import create_deep_agent

skill = Path(".agents/skills/rohitg00-write-manual/SKILL.md").read_text()
agent = create_deep_agent(model=model, system_prompt=f"You are a helpful agent.\n\n{skill}")
agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

This gets SKILL.md only. The skill's 6 other files are not included.

Other ways to add it

Deep Agents docs

Its own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" agent-framework
decimalai skills add rohitg00-write-manual

Add it to your agent

import asyncio

from agent_framework import Agent
from decimalai.agent_framework import skills

agent = Agent(client=client, instructions="You are a helpful agent.", context_providers=[skills()])
asyncio.run(agent.run("Hello!"))

It caches skills by default, so restart the process after decimalai skills update.

The same install from Python, for a notebook or a setup script. Its own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" agent-framework

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("rohitg00-write-manual")
if result.exit_code:
    raise SystemExit(result.problems)

import asyncio

from agent_framework import Agent
from decimalai.agent_framework import skills

agent = Agent(client=client, instructions="You are a helpful agent.", context_providers=[skills()])
asyncio.run(agent.run("Hello!"))

It caches skills by default, so restart the process after decimalai skills update.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/rohitg00-write-manual/SKILL.md

Give it to your agent

import asyncio
from pathlib import Path
from agent_framework import Agent

skill = Path(".agents/skills/rohitg00-write-manual/SKILL.md").read_text()
agent = Agent(client=client, instructions=f"You are a helpful agent.\n\n{skill}")
asyncio.run(agent.run("Hello!"))

This gets SKILL.md only. The skill's 6 other files are not included.

Other ways to add it

Microsoft Agent Framework docs

Strands' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" strands-agents
decimalai skills add rohitg00-write-manual

Add it to your agent

from decimalai.strands import skills
from strands import Agent
from strands.vended_tools import file_editor, shell

agent = Agent(
    model=model,                # always pass one: the default is Amazon Bedrock
    system_prompt="You are a helpful agent.",
    tools=[file_editor, shell],
    plugins=[skills()],
)
agent("Hello!")

Strands loads an agent's skills once, so build the agent again after decimalai skills update.

The same install from Python, for a notebook or a setup script. Strands' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" strands-agents

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("rohitg00-write-manual")
if result.exit_code:
    raise SystemExit(result.problems)

from decimalai.strands import skills
from strands import Agent
from strands.vended_tools import file_editor, shell

agent = Agent(
    model=model,                # always pass one: the default is Amazon Bedrock
    system_prompt="You are a helpful agent.",
    tools=[file_editor, shell],
    plugins=[skills()],
)
agent("Hello!")

Strands loads an agent's skills once, so build the agent again after decimalai skills update.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/rohitg00-write-manual/SKILL.md

Give it to your agent

from pathlib import Path
from strands import Agent

skill = Path(".agents/skills/rohitg00-write-manual/SKILL.md").read_text()
agent = Agent(model=model, system_prompt=f"You are a helpful agent.\n\n{skill}")
agent("Hello!")

This gets SKILL.md only. The skill's 6 other files are not included.

Other ways to add it

Strands docs

Adds every file the skill has, pinned so you can update it. Cursor, Copilot, Cline and Warp read this folder by themselves.

pip install "decimalai>=0.15"
decimalai skills add rohitg00-write-manual

No Python or account. Cursor, Copilot, Cline and Warp read this folder by themselves.

Save it into your project

curl -fsSL --create-dirs -o .agents/skills/rohitg00-write-manual/SKILL.md https://app.decimal.ai/s/rohitg00-write-manual/SKILL.md

Copy SKILL.md

Save it in your project, as

.agents/skills/rohitg00-write-manual/SKILL.md

This gets SKILL.md only. The skill's 6 other files are not included.

Other ways to add it

Cursor and other editors docs

Fetch the file and give its text to your model as instructions. No account or package needed.

Get the file

curl -fsSL https://app.decimal.ai/s/rohitg00-write-manual/SKILL.md

Read the summary as JSON

curl -fsSL https://app.decimal.ai/s/rohitg00-write-manual.json

This gets SKILL.md only. The skill's 6 other files are not included.

Other ways to add it

Other setups docs

You don't need a DecimalAI account.

Version: v2, tested 11/2/2026
Source: rohitg00/ai-engineering-from-scratch ↗
License: MIT

Manage it in DecimalAI

Saved prompts and skills, pinned versions, and traces of this skill in your runs. DecimalAI does not run your agent.

Claude Code reads files from your project, so DecimalAI config does not apply there.

On Claude Agent SDK: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On OpenAI Agents: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On OpenAI SDK: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Anthropic: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Gemini API: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On LangChain: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On CrewAI: set DECIMAL_API_KEY and add decimalai.init(crewai=True) to record runs and skill use. The skill version stays in your repo.

On Google ADK: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Pydantic AI: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Deep Agents: set DECIMAL_API_KEY and add decimalai.init(langchain=True) to record runs and skill use. The skill version stays in your repo.

On Microsoft Agent Framework: set DECIMAL_API_KEY and add decimalai.init(otel=True, agent_name="support") to record runs and skill use. The skill version stays in your repo.

On Strands: set DECIMAL_API_KEY and add decimalai.init(otel=True, agent_name="support") to record runs and skill use. The skill version stays in your repo.

Editors read files from your project, so DecimalAI config does not apply there.

Anywhere else: record a use with decimalai.log_skill_activation() inside a trace.

Use this skill

SKILL.md

Write a manual

A manual explains one subject, such as a protocol, a file format, or a runtime, at one exact version. A lesson teaches a concept and moves on. A manual stays with one system until the reader can predict what it does in a case the manual never showed.

This skill gives the full method. It covers research, ranked sources, and a register of conflicts between sources. It also covers an offline capture kit, a fixed section shape, prose limits, and an audit that must report TOTAL 0. It works in any repository. Inside the AI Engineering from Scratch repo, the tooling already exists, and manuals/a2a-101/ is the worked example.

When to use

The reader must predict the behavior of one system, at one version, in cases you did not show.
The subject has a specification, a schema, or a source tree that you can pin to a commit.
You can run the subject, or a faithful stand-in, offline and record its requests and responses.
The result is 60 to 100 pages with figures, and other people will maintain it.

When not to use

You teach a general concept, such as attention or retrieval. Write a lesson instead.
The subject has no version to pin, or changes every week.
You cannot run the subject and cannot record its output. A manual without captures is an essay.
You want a short how-to. A manual of fewer than about 15 sections does not need this shape.

Size of a 101 manual

Item	Target
pages	60 to 100
parts	6 to 8, plus one reference part
sections	about 25
figures	30 to 40
outcomes in `manual.json`	at least 3
takeaways per section	exactly 1 block, with at least 2 items

The worked example has 7 parts, 28 sections, 7 reference sections, and 31 figures.

Method

Pin the subject. Record the version, source URL, commit, release date, and verified date.
Rank the sources. List them in authority order: schema or proto, specification, project docs, reference SDK, capture kit.
Vendor what the license allows. Copy each quotable source unchanged into research/sources/, with its license file beside it.
Write the fact brief. Index every rule you will use by section and line number, in research/. See references/research-and-sources.md.
Open the conflict register. Give each disagreement between two sources an id (D1, D2, ...) as you find it.
Build the capture kit. Drive the subject offline and write deterministic files to capture/out/. See references/capture-kit.md.
Plan the contents from the specification. Name each section after one thing the reader can find in the spec.
Write manual.json. Fill the pin, outcomes, palette, ranked sources, quote sources, capture commands, and parts. See references/manual-json.md.
Write the front matter. Title it "How to read this manual" and follow the order in "Front matter" below.
Write one section at a time. Use the section shape below. Cut every listing from a capture file.
Draw each figure from a capture. Follow the figure must-haves below and the sibling blueprint-figure skill.
Build and audit. Fix every finding until the audit prints TOTAL 0. See references/audit.md.
Size commits by judgment. A section with its figures and the captures it adds is a good unit.

Plan the contents from the specification

Build the table of contents from the names the specification uses, then decide what each part proves.

Front matter. One document, front.md, titled "How to read this manual".
Part 1, the subject on one page. Two sections: what the subject standardizes, then one complete exchange from a capture.
Middle parts. One part per layer of the subject, such as discovery, data model, operations, bindings, security, and extensions.
Last part, implementation. Build a client and a server. Test both with the official conformance tools. Explain migration from the previous version.
Reference part. Method tables, objects, states, errors, a glossary, the sources and conflicts, and the figure index.

Each section title names one object, operation, binding, header, error, or extension from the specification. "CancelTask and terminal states" is a good title. "State machines" is not, because no specification defines an object with that name. Put a general idea in the section about the object that has it.

Front matter

front.md covers these topics, in this order:

Who the manual is for, and what they can do after it.
How it was made, with the ranked sources table.
The capture kit.
The conventions: citation forms, listing cuts, and id shortening.
A first run that the reader can do offline.
How the parts are ordered, as an empty parts block.
Colour in figures, as an empty palette block.
Figure 0.1, which teaches the arrow and colour grammar of this manual.

Section shape

Every section file follows this order. Reference sections and the front matter need a thesis and a sources line, but no outcome sentence and no takeaways.

# Title, with the name the specification uses.
> Thesis, directly under the title: one sentence of at most 30 words, the claim the section proves.
An opening paragraph that starts from a concrete situation the reader has been in.
The sentence "When you finish this section, you can ..." inside the first two paragraphs.
The body: ## subsections, definitions that start with **Term:**, figures, listings, rules, and tables.
Exactly one takeaways block, with two or more actions.
A last paragraph that starts with Sources: and names every file the section was written from.

A complete template is in references/section-template.md.

Fenced block kinds

Fence	Holds	Required keys
`figure`	one figure, by id	`id`, `kind`, `title`, `claim`, `caption`
`listing`	lines cut from one capture file	`title`, `source`, `lang`, optional `note`, then `---` and the lines
`rule`	one quote, checked word for word	`label`, `source`, then `---` and the quote
`takeaways`	the actions for the section	two or more `- item` lines
`parts`, `palette`, `figure-index`, `contents`	generated tables	no body

Every other fence needs a language tag. A json, jsonl, http, or sse fence must be a listing instead.

Markdown subset

Use only these constructs, so every edition renders the same way:

One # title on the first line, and the thesis quote under it.
## and ### headings, each with an optional {#anchor}.
Paragraphs, and one-level - or 1. lists.
Pipe tables with a header row.
Bold, italic, and inline code.
{{key ref}} citations, [text](#s-5-3) cross-references, and repository links.

Raw HTML, horizontal rules, nested lists, #### headings, and other quote blocks fail the build. Section anchors are s- plus the id with dots as hyphens, such as s-1-4 or s-r-2.

Listings

Cut every listing from a file in capture/out/. Never type a request or a response from memory.
Each listing line must appear in its source file exactly as written.
Mark a cut with … on its own line or inside a line.
Say what you cut in the note.
Name the source file in source, so the reader can open the full record.

Sources, quotes, and conflicts

Rank sources by authority. When two sources disagree, the higher one wins and the text says so.
Quote a rule word for word, then cite its key: "quoted text" {{spec §3.1.5}}.
Declare every citation key in quoteSources. Map it to a vendored file, or to null when the source cannot be vendored.
Paraphrase sources with a null key, such as an SDK. Never quote them.
When sources disagree, quote both sides in the section, say which one the manual follows, and link the register entry.
Keep the register in the sources reference section. Give it five columns: id, sources, choice, sections, and upstream status.
Never name or cite another guide, course, or book. Cite specifications, source code, papers, and the subject's own documentation.

Prose limits

Limit	Value
words in a sentence	at most 25
words in a thesis	at most 30, one sentence
words in a figure claim	at most 28, one sentence ending with a period
words in a takeaway	at most 20, an instruction in imperative mood
sentences in a paragraph	at most 6

Write in the second person, about the mechanism. Define a term once, use it the same way everywhere, and add it to the glossary. Quotes, code, and citations are exempt from the limits.

Use no semicolons, no contractions, and no em or en dashes. Never write the word may. Use "can", or state the condition. Avoid the banned words in references/prose-rules.md.

Figure must-haves

Use the sibling blueprint-figure skill to draw the figures. Every figure in a manual must also meet these rules:

Use one of nine kinds: sequence, structure, flow, comparison, timeline, tree, state, decision, layers.
Show the real system: real ids, field names, method names, and sequence numbers from a capture.
Make one claim of at most 28 words. The caption says how to read the figure, then names its capture file.
Never draw generic boxes such as "Component A", stat cards, or progress bars.
Compare two behaviors of the subject. Never compare against an earlier build.
Give each hue one meaning per manual. rose is failure, grey is outside the subject, amber is lifecycle, teal is durable state.
Draw exchanges with the eight arrow styles below. Figure 0.1 teaches the ones the manual uses.
Use viewBox="0 0 640 H" with H at most 760, text at least 11 units, and a file of at most 40 KB.
Put a <title> and a <desc> of at least 40 characters on the root, which has role="img".
Start every id in the SVG with the figure id, because all figures share one page.
Write colours only as var(--m-<token>, #hex), with the light value of the token as the hex.

Arrow style	Means
solid ink	a call or request
dashed ink	a reply
solid teal	a durable write
dashed amber	a state change
solid plum	a model call or compute
dashed olive	an effect outside the system
dotted indigo	a stream or an event
dashed rose	a failure

Build and audit

Inside the AI Engineering from Scratch repo, run these from the repository root:

node --test site/test_manuals.js
node site/build-manuals.js
node manuals/_shared/figkit.js build manuals/<id>
node scripts/audit_manuals.js --manual <id>

Outside the repo, build your own audit from references/audit.md. It lists each check, so you can write it as one script. Fix the text, never the limit. A manual does not merge until the audit prints TOTAL 0.

Commit rules

Size commits by judgment. A section with its figures and the captures it adds is a good unit. A small fix across sections can be one commit.
Use the message feat(manual/<id>): <section slug>.
Never commit generated output. Inside the repo, that is site/manual-<id>.html, site/manuals.html, and site/manuals-data.js.
Keep status at draft until the manual is complete. A ready manual needs a README.md.
Update vendored sources only together with the pin in manual.json.

Check before you finish

Files

references/manual-json.md: every field of manual.json, with a starter file.
references/section-template.md: a section skeleton with each fence kind.
references/research-and-sources.md: the fact brief, vendoring, quotes, and the conflict register.
references/capture-kit.md: how to record deterministic captures and check them for drift.
references/prose-rules.md: the limits and the full banned word list.
references/audit.md: every audit rule, and how to reproduce the audit outside the repo.
Inside the AI Engineering from Scratch repo, also see manuals/AUTHORING.md, manuals/manual.schema.json, and manuals/a2a-101/.

When it activates

Automatically, when a task matches. Use it for "write a manual", "write a 101 manual for <subject>", "manual.json", "add a manual section", "build a capture kit", "audit the manual", or "pin a spec version and document it".

About this skill

Automatic

Doc Ops packmanualsdocumentationspecifications

SkillSafety

✓ 3 of 3 passed

Code scan15 of 15 checks clean

0 critical · 0 warning · 0 info — scanner v8 — 10/30/2026

View 15 scanner checks

live_secretremote_code_executionreverse_shelldata_exfiltrationssrf_metadataagent_snoopinganti_refusaldestructive_commandsobfuscated_unicodeunicode_homoglyphopaque_blobsuspicious_urltool_overreachtrigger_abuseprompt_injection_phrasing

IntentSafe

LLM judge · does the skill do what it claims

ContentClean

LLM judge · policy & harmful-content review

Source

Imported

rohitg00 / ai-engineering-from-scratch

skills/write-manual/SKILL.md

View on GitHub ↗

License MITImported 10/30/2026Version v2Bundled 6 files

Illustrative Want to see what rohitg00/write-manual would put in front of your model? Preview the rendered body and check its trigger phrases — no LLM call, no signup.

Related skills

Skills that do similar work, with their headline benchmark lift.

From the same source and nearby in the catalogue.

Ready to supercharge your AI agents?

SkillScore

Safety

What it changes

Track record

Use this skill

Write a manual

When to use

When not to use

Size of a 101 manual

Method

Plan the contents from the specification

Front matter

Section shape

Fenced block kinds

Markdown subset

Listings

Sources, quotes, and conflicts

Prose limits

Figure must-haves

Build and audit

Commit rules

Check before you finish

Files

When it activates

SkillSafety

Source

Related skills

More in the registry