Ready to supercharge your AI agents?

Install any skill in seconds. Free to start, no credit card required.

Science Discipline Methods · yzlin286-wq | DecimalAI

Scienceby yzlin286-wq

Science Discipline Methods

Use when a research question is still a question rather than a plan — when you know the field but not which study design the field accepts, how many samples it demands, which measurements count as evidence, or which software is standard; also use when a review came back saying the design cannot answer the question, when you are switching fields or advising a student in an unfamiliar one, when two supervisors disagree about method, or when you need to know what reviewers in that field attack firs

Never made a case worseMaintained

SkillScore

SkillScore82/100

Test results 82

Safety

3/3 safety checks passed

Code scan
Intent
Content

What it changes

36%82%of test cases passed +45 pts

Without skill8 of 22

With skill18 of 22

10 fixed8 passed either way4 still failing0 broke

Measured on gemini-3.8-flash11/3/2026v1

Track record

Agent runs: 0; All time

See one task, with and without the skill

One test taskA researcher knows only that their target submission venue is 'Physical Review B' but has not settled on the discipline package ID. Which invocation format resolves this discipline profile?

Without the skillMissed

With the skillPassed

Same model, same task. Answers are capped and redacted.

Use this skill

Your agent runs on

Adds every file the skill has, pinned so you can update it. No account needed.

pip install "decimalai>=0.15"
decimalai skills add yzlin286-wq-science-discipline-methods
claude --plugin-dir "$(git rev-parse --show-toplevel 2>/dev/null || pwd)/.agents"

The same install from Python, for a notebook or a setup script.

Install

pip install "decimalai>=0.15"

Add the skill

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("yzlin286-wq-science-discipline-methods")
if result.exit_code:
    raise SystemExit(result.problems)

print("Added. Start Claude Code with the command below.")

Start Claude Code with it

claude --plugin-dir "$(git rev-parse --show-toplevel 2>/dev/null || pwd)/.agents"

Type these in a Claude Code session. No account or API key. It writes the skill and any files it bundles, and asks first when its safety rating isn't Passed.

Add the DecimalAI plugin, once

/plugin marketplace add decimal-labs/decimalai-claude-plugins
/plugin install decimalai@decimalai

Install this skill

/decimalai:install yzlin286-wq-science-discipline-methods

The plugin needs python3 and curl on your machine.

No Python or account. Claude Code picks it up in its next session.

Save it into your project

curl -fsSL --create-dirs -o .claude/skills/yzlin286-wq-science-discipline-methods/SKILL.md https://app.decimal.ai/s/yzlin286-wq-science-discipline-methods/SKILL.md

Copy SKILL.md

Save it in your project, as

.claude/skills/yzlin286-wq-science-discipline-methods/SKILL.md

Other ways to add it

Claude Code docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[claude-agent-sdk]"
decimalai skills add yzlin286-wq-science-discipline-methods

Add it to your agent

import asyncio

from claude_agent_sdk import ClaudeAgentOptions
from decimalai.claude_agent_sdk import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

async def main():
    question = "Hello!"
    async with support.run(question) as run:  # one user message, one run
        async for message in run.query(options=ClaudeAgentOptions(max_turns=6)):
            print(message)

# In a notebook or async code: await main()
asyncio.run(main())

Prefer its own loader? ClaudeAgentOptions(plugins=[skills_plugin()], skills="all") reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

The same install from Python, for a notebook or a setup script. agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[claude-agent-sdk]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("yzlin286-wq-science-discipline-methods")
if result.exit_code:
    raise SystemExit(result.problems)

import asyncio

from claude_agent_sdk import ClaudeAgentOptions
from decimalai.claude_agent_sdk import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

async def main():
    question = "Hello!"
    async with support.run(question) as run:  # one user message, one run
        async for message in run.query(options=ClaudeAgentOptions(max_turns=6)):
            print(message)

# In a notebook or async code: await main()
asyncio.run(main())

Prefer its own loader? ClaudeAgentOptions(plugins=[skills_plugin()], skills="all") reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md

Give it to your agent

import asyncio
from pathlib import Path
from claude_agent_sdk import ClaudeAgentOptions, query

skill = Path(".agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md").read_text()
options = ClaudeAgentOptions(system_prompt=f"You are a helpful agent.\n\n{skill}", max_turns=6)

async def main():
    async for message in query(prompt="Hello!", options=options):
        print(message)

# In a notebook or async code: await main()
asyncio.run(main())

Other ways to add it

Claude Agent SDK docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[openai-agents]"
decimalai skills add yzlin286-wq-science-discipline-methods

Add it to your agent

from agents import Agent, Runner
from decimalai.openai_agents import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    name=support.name,
    instructions=support.instructions,  # your prompt, then the skill list
    tools=[*support.tools],             # your tools, then load_skill
)
# In a notebook or async code: result = await Runner.run(agent, "Hello!")
result = Runner.run_sync(agent, "Hello!")

Using SandboxAgent? capabilities=[Shell(), decimalai.openai_agents.sandbox_skills()] points its own loader at the same folder.

Install

pip install "decimalai[openai-agents]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("yzlin286-wq-science-discipline-methods")
if result.exit_code:
    raise SystemExit(result.problems)

from agents import Agent, Runner
from decimalai.openai_agents import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    name=support.name,
    instructions=support.instructions,  # your prompt, then the skill list
    tools=[*support.tools],             # your tools, then load_skill
)
# In a notebook or async code: result = await Runner.run(agent, "Hello!")
result = Runner.run_sync(agent, "Hello!")

Using SandboxAgent? capabilities=[Shell(), decimalai.openai_agents.sandbox_skills()] points its own loader at the same folder.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md

Give it to your agent

from pathlib import Path
from agents import Agent, Runner

skill = Path(".agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md").read_text()
agent = Agent(name="support", instructions=f"You are a helpful agent.\n\n{skill}")
# In a notebook or async code: result = await Runner.run(agent, "Hello!")
result = Runner.run_sync(agent, "Hello!")

Other ways to add it

OpenAI Agents docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[openai]"
decimalai skills add yzlin286-wq-science-discipline-methods

Add it to your agent

import json

from openai import OpenAI
from decimalai.openai import agent_config

client = OpenAI()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your tools, as Chat Completions takes them, and what answers each.
TOOLS = [{"type": "function", "function": {
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters": {"type": "object", "properties": {"order_id": {"type": "string"}},
                   "required": ["order_id"]},
}}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    # run.system is your prompt, then the skill list.
    messages = [{"role": "system", "content": run.system}, run.message]
    while True:
        reply = client.chat.completions.create(
            model="gpt-5.4-mini",
            messages=messages,
            tools=[*TOOLS, *run.tools],  # your tools, then load_skill
        ).choices[0].message
        messages.append(reply)
        if not reply.tool_calls:
            break
        for call in reply.tool_calls:
            # load_skill is answered by the run; your own tools by FUNCTIONS.
            function = FUNCTIONS.get(call.function.name)
            messages.append(run.tool_result(call) or {
                "role": "tool", "tool_call_id": call.id,
                "content": function(**json.loads(call.function.arguments)) if function
                else f"There is no tool named {call.function.name!r}.",
            })
print(reply.content)

# The Responses API takes run.response_tools instead of run.tools.

Install

pip install "decimalai[openai]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("yzlin286-wq-science-discipline-methods")
if result.exit_code:
    raise SystemExit(result.problems)

import json

from openai import OpenAI
from decimalai.openai import agent_config

client = OpenAI()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your tools, as Chat Completions takes them, and what answers each.
TOOLS = [{"type": "function", "function": {
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters": {"type": "object", "properties": {"order_id": {"type": "string"}},
                   "required": ["order_id"]},
}}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    # run.system is your prompt, then the skill list.
    messages = [{"role": "system", "content": run.system}, run.message]
    while True:
        reply = client.chat.completions.create(
            model="gpt-5.4-mini",
            messages=messages,
            tools=[*TOOLS, *run.tools],  # your tools, then load_skill
        ).choices[0].message
        messages.append(reply)
        if not reply.tool_calls:
            break
        for call in reply.tool_calls:
            # load_skill is answered by the run; your own tools by FUNCTIONS.
            function = FUNCTIONS.get(call.function.name)
            messages.append(run.tool_result(call) or {
                "role": "tool", "tool_call_id": call.id,
                "content": function(**json.loads(call.function.arguments)) if function
                else f"There is no tool named {call.function.name!r}.",
            })
print(reply.content)

# The Responses API takes run.response_tools instead of run.tools.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md

Give it to your agent

from pathlib import Path
from openai import OpenAI

client = OpenAI()
skill = Path(".agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md").read_text()
reply = client.chat.completions.create(
    model="gpt-5.4-mini",
    messages=[
        {"role": "system", "content": f"You are a helpful agent.\n\n{skill}"},
        {"role": "user", "content": "Hello!"},
    ],
).choices[0].message

Other ways to add it

OpenAI SDK docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[anthropic]"
decimalai skills add yzlin286-wq-science-discipline-methods

Add it to your agent

import anthropic
from decimalai.anthropic import agent_config

client = anthropic.Anthropic()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

question = "Hello!"
with support.run(question) as run:  # one user message, one run
    answer = client.beta.messages.tool_runner(
        model="claude-haiku-5-5",
        max_tokens=4096,
        system=run.system,     # your prompt, then the skill list
        tools=[*run.tools],    # your tools, then load_skill
        messages=[{"role": "user", "content": question}],
    ).until_done()

Install

pip install "decimalai[anthropic]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("yzlin286-wq-science-discipline-methods")
if result.exit_code:
    raise SystemExit(result.problems)

import anthropic
from decimalai.anthropic import agent_config

client = anthropic.Anthropic()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

question = "Hello!"
with support.run(question) as run:  # one user message, one run
    answer = client.beta.messages.tool_runner(
        model="claude-haiku-5-5",
        max_tokens=4096,
        system=run.system,     # your prompt, then the skill list
        tools=[*run.tools],    # your tools, then load_skill
        messages=[{"role": "user", "content": question}],
    ).until_done()

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md

Give it to your agent

from pathlib import Path
import anthropic

client = anthropic.Anthropic()
skill = Path(".agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md").read_text()
reply = client.messages.create(
    model="claude-haiku-5-5",
    max_tokens=4096,
    system=f"You are a helpful agent.\n\n{skill}",
    messages=[{"role": "user", "content": "Hello!"}],
)

Other ways to add it

Anthropic docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[google-genai]"
decimalai skills add yzlin286-wq-science-discipline-methods

Add it to your agent

from google import genai
from google.genai import types
from decimalai.google_genai import agent_config

client = genai.Client()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your functions, as declarations for the model, and what answers each.
TOOLS = [{"function_declarations": [{
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters_json_schema": {"type": "object", "properties": {"order_id": {"type": "string"}},
                               "required": ["order_id"]},
}]}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    config = types.GenerateContentConfig(
        system_instruction=run.system,     # your prompt, then the skill list
        tools=[*TOOLS, *run.tool_params],  # your functions, then load_skill
    )
    contents = [{"role": "user", "parts": [{"text": run.message}]}]
    while True:
        response = client.models.generate_content(
            model="gemini-3.5-flash", contents=contents, config=config,
        )
        if not response.function_calls:
            break
        contents.append(response.candidates[0].content)
        parts = []
        for call in response.function_calls:
            # load_skill is answered by the run; your own functions by FUNCTIONS.
            # A loop of your own rather than automatic function calling, which
            # raises KeyError when the model asks for a function you did not pass.
            function = FUNCTIONS.get(call.name)
            parts.append(run.tool_result(call) or {"function_response": {
                "name": call.name, "id": call.id,
                "response": {"result": function(**(call.args or {})) if function
                             else f"There is no function named {call.name!r}."},
            }})
        contents.append({"role": "user", "parts": parts})
print(response.text)

Install

pip install "decimalai[google-genai]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("yzlin286-wq-science-discipline-methods")
if result.exit_code:
    raise SystemExit(result.problems)

from google import genai
from google.genai import types
from decimalai.google_genai import agent_config

client = genai.Client()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your functions, as declarations for the model, and what answers each.
TOOLS = [{"function_declarations": [{
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters_json_schema": {"type": "object", "properties": {"order_id": {"type": "string"}},
                               "required": ["order_id"]},
}]}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    config = types.GenerateContentConfig(
        system_instruction=run.system,     # your prompt, then the skill list
        tools=[*TOOLS, *run.tool_params],  # your functions, then load_skill
    )
    contents = [{"role": "user", "parts": [{"text": run.message}]}]
    while True:
        response = client.models.generate_content(
            model="gemini-3.5-flash", contents=contents, config=config,
        )
        if not response.function_calls:
            break
        contents.append(response.candidates[0].content)
        parts = []
        for call in response.function_calls:
            # load_skill is answered by the run; your own functions by FUNCTIONS.
            # A loop of your own rather than automatic function calling, which
            # raises KeyError when the model asks for a function you did not pass.
            function = FUNCTIONS.get(call.name)
            parts.append(run.tool_result(call) or {"function_response": {
                "name": call.name, "id": call.id,
                "response": {"result": function(**(call.args or {})) if function
                             else f"There is no function named {call.name!r}."},
            }})
        contents.append({"role": "user", "parts": parts})
print(response.text)

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md

Give it to your agent

from pathlib import Path
from google import genai
from google.genai import types

client = genai.Client()
skill = Path(".agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md").read_text()
response = client.models.generate_content(
    model="gemini-3.5-flash",
    contents="Hello!",
    config=types.GenerateContentConfig(system_instruction=f"You are a helpful agent.\n\n{skill}"),
)

Other ways to add it

Gemini API docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[langchain]" langchain-openai
decimalai skills add yzlin286-wq-science-discipline-methods

Add it to your agent

from langchain.agents import create_agent
from decimalai.langchain import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = create_agent(
    "openai:gpt-5.4-mini",
    tools=[],                         # your tools; the middleware adds load_skill
    middleware=[support.middleware],  # your prompt, the skill list and load_skill
)
result = agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

Install

pip install "decimalai[langchain]" langchain-openai

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("yzlin286-wq-science-discipline-methods")
if result.exit_code:
    raise SystemExit(result.problems)

from langchain.agents import create_agent
from decimalai.langchain import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = create_agent(
    "openai:gpt-5.4-mini",
    tools=[],                         # your tools; the middleware adds load_skill
    middleware=[support.middleware],  # your prompt, the skill list and load_skill
)
result = agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md

Give it to your agent

from pathlib import Path
from langchain.agents import create_agent

skill = Path(".agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md").read_text()
agent = create_agent("openai:gpt-5.4-mini", tools=[], system_prompt=f"You are a helpful agent.\n\n{skill}")
result = agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

Other ways to add it

LangChain docs

CrewAI's own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" "crewai>=1.15.27"
decimalai skills add yzlin286-wq-science-discipline-methods

Add it to your agent

import decimalai.crewai
from crewai import Agent, Crew, Task

agent = Agent(
    role="Support", goal="Help the customer", backstory="A support agent.",
    llm=llm,                               # your own CrewAI LLM
    skills=decimalai.crewai.skills(),      # the installed folder
    tools=decimalai.crewai.skill_tools(),  # reads a skill's files, runs its scripts
)
task = Task(description="Hello!", expected_output="an answer", agent=agent)
Crew(agents=[agent], tasks=[task]).kickoff()

The same install from Python, for a notebook or a setup script. CrewAI's own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" "crewai>=1.15.27"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("yzlin286-wq-science-discipline-methods")
if result.exit_code:
    raise SystemExit(result.problems)

import decimalai.crewai
from crewai import Agent, Crew, Task

agent = Agent(
    role="Support", goal="Help the customer", backstory="A support agent.",
    llm=llm,                               # your own CrewAI LLM
    skills=decimalai.crewai.skills(),      # the installed folder
    tools=decimalai.crewai.skill_tools(),  # reads a skill's files, runs its scripts
)
task = Task(description="Hello!", expected_output="an answer", agent=agent)
Crew(agents=[agent], tasks=[task]).kickoff()

No DecimalAI package. CrewAI's own loader reads the folder, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md

Give it to your agent

from pathlib import Path
from crewai import Agent, Crew, Task

agent = Agent(
    role="Support", goal="Help the customer", backstory="A support agent.",
    llm=llm,                         # your own CrewAI LLM
    skills=[Path(".agents/skills")],
)
task = Task(description="Hello!", expected_output="an answer", agent=agent)
Crew(agents=[agent], tasks=[task]).kickoff()

Other ways to add it

CrewAI docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[adk]"
decimalai skills add yzlin286-wq-science-discipline-methods

Add it to your agent

from decimalai.adk import DecimalAIPlugin, agent_config
from google.adk.agents import LlmAgent
from google.adk.apps import App

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = LlmAgent(
    name="support",          # ADK needs a Python identifier
    model="gemini-3.5-flash",
    instruction=support.instruction,  # your prompt, then the skill list
    tools=[*support.tools],           # your tools, then load_skill
)
# DecimalAIPlugin makes each invocation of runners built from this App one trace.
app = App(name="support", root_agent=agent, plugins=[DecimalAIPlugin()])

Prefer ADK's own loader? SkillToolset(skills=decimalai.adk.skills(), ...) reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

Install

pip install "decimalai[adk]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("yzlin286-wq-science-discipline-methods")
if result.exit_code:
    raise SystemExit(result.problems)

from decimalai.adk import DecimalAIPlugin, agent_config
from google.adk.agents import LlmAgent
from google.adk.apps import App

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = LlmAgent(
    name="support",          # ADK needs a Python identifier
    model="gemini-3.5-flash",
    instruction=support.instruction,  # your prompt, then the skill list
    tools=[*support.tools],           # your tools, then load_skill
)
# DecimalAIPlugin makes each invocation of runners built from this App one trace.
app = App(name="support", root_agent=agent, plugins=[DecimalAIPlugin()])

Prefer ADK's own loader? SkillToolset(skills=decimalai.adk.skills(), ...) reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md

Give it to your agent

from pathlib import Path
from google.adk.agents import LlmAgent

skill = Path(".agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md").read_text()
agent = LlmAgent(
    name="support",
    model="gemini-3.5-flash",
    instruction=lambda context: f"You are a helpful agent.\n\n{skill}",
)

Other ways to add it

Google ADK docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[pydantic-ai]"
decimalai skills add yzlin286-wq-science-discipline-methods

Add it to your agent

from pydantic_ai import Agent
from decimalai.pydantic_ai import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    "openai:gpt-4o-mini",
    name=support.name,
    tools=[],                 # your tools; the capability adds load_skill
    capabilities=[support],   # your prompt, the skill list and load_skill
)
# In a notebook or async code: result = await agent.run("Hello!")
result = agent.run_sync("Hello!")

On the Pydantic AI harness, decimalai.pydantic_ai_harness.skills(project) uses its own loader instead.

Install

pip install "decimalai[pydantic-ai]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("yzlin286-wq-science-discipline-methods")
if result.exit_code:
    raise SystemExit(result.problems)

from pydantic_ai import Agent
from decimalai.pydantic_ai import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    "openai:gpt-4o-mini",
    name=support.name,
    tools=[],                 # your tools; the capability adds load_skill
    capabilities=[support],   # your prompt, the skill list and load_skill
)
# In a notebook or async code: result = await agent.run("Hello!")
result = agent.run_sync("Hello!")

On the Pydantic AI harness, decimalai.pydantic_ai_harness.skills(project) uses its own loader instead.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md

Give it to your agent

from pathlib import Path
from pydantic_ai import Agent

skill = Path(".agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md").read_text()
agent = Agent("openai:gpt-4o-mini", instructions=f"You are a helpful agent.\n\n{skill}")
# In a notebook or async code: result = await agent.run("Hello!")
result = agent.run_sync("Hello!")

Other ways to add it

Pydantic AI docs

Deep Agents' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" deepagents
decimalai skills add yzlin286-wq-science-discipline-methods

Add it to your agent

import decimalai.deepagents
from deepagents import create_deep_agent

agent = create_deep_agent(model=model, **decimalai.deepagents.skills())
agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

The default backend reads files but has no shell. To run a skill's scripts, pass skills(backend=LocalShellBackend(...)).

The same install from Python, for a notebook or a setup script. Deep Agents' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" deepagents

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("yzlin286-wq-science-discipline-methods")
if result.exit_code:
    raise SystemExit(result.problems)

import decimalai.deepagents
from deepagents import create_deep_agent

agent = create_deep_agent(model=model, **decimalai.deepagents.skills())
agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

The default backend reads files but has no shell. To run a skill's scripts, pass skills(backend=LocalShellBackend(...)).

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md

Give it to your agent

from pathlib import Path
from deepagents import create_deep_agent

skill = Path(".agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md").read_text()
agent = create_deep_agent(model=model, system_prompt=f"You are a helpful agent.\n\n{skill}")
agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

Other ways to add it

Deep Agents docs

Its own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" agent-framework
decimalai skills add yzlin286-wq-science-discipline-methods

Add it to your agent

import asyncio

from agent_framework import Agent
from decimalai.agent_framework import skills

agent = Agent(client=client, instructions="You are a helpful agent.", context_providers=[skills()])
asyncio.run(agent.run("Hello!"))

It caches skills by default, so restart the process after decimalai skills update.

The same install from Python, for a notebook or a setup script. Its own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" agent-framework

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("yzlin286-wq-science-discipline-methods")
if result.exit_code:
    raise SystemExit(result.problems)

import asyncio

from agent_framework import Agent
from decimalai.agent_framework import skills

agent = Agent(client=client, instructions="You are a helpful agent.", context_providers=[skills()])
asyncio.run(agent.run("Hello!"))

It caches skills by default, so restart the process after decimalai skills update.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md

Give it to your agent

import asyncio
from pathlib import Path
from agent_framework import Agent

skill = Path(".agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md").read_text()
agent = Agent(client=client, instructions=f"You are a helpful agent.\n\n{skill}")
asyncio.run(agent.run("Hello!"))

Other ways to add it

Microsoft Agent Framework docs

Strands' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" strands-agents
decimalai skills add yzlin286-wq-science-discipline-methods

Add it to your agent

from decimalai.strands import skills
from strands import Agent
from strands.vended_tools import file_editor, shell

agent = Agent(
    model=model,                # always pass one: the default is Amazon Bedrock
    system_prompt="You are a helpful agent.",
    tools=[file_editor, shell],
    plugins=[skills()],
)
agent("Hello!")

Strands loads an agent's skills once, so build the agent again after decimalai skills update.

The same install from Python, for a notebook or a setup script. Strands' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" strands-agents

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("yzlin286-wq-science-discipline-methods")
if result.exit_code:
    raise SystemExit(result.problems)

from decimalai.strands import skills
from strands import Agent
from strands.vended_tools import file_editor, shell

agent = Agent(
    model=model,                # always pass one: the default is Amazon Bedrock
    system_prompt="You are a helpful agent.",
    tools=[file_editor, shell],
    plugins=[skills()],
)
agent("Hello!")

Strands loads an agent's skills once, so build the agent again after decimalai skills update.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md

Give it to your agent

from pathlib import Path
from strands import Agent

skill = Path(".agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md").read_text()
agent = Agent(model=model, system_prompt=f"You are a helpful agent.\n\n{skill}")
agent("Hello!")

Other ways to add it

Strands docs

Adds every file the skill has, pinned so you can update it. Cursor, Copilot, Cline and Warp read this folder by themselves.

pip install "decimalai>=0.15"
decimalai skills add yzlin286-wq-science-discipline-methods

No Python or account. Cursor, Copilot, Cline and Warp read this folder by themselves.

Save it into your project

curl -fsSL --create-dirs -o .agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md https://app.decimal.ai/s/yzlin286-wq-science-discipline-methods/SKILL.md

Copy SKILL.md

Save it in your project, as

.agents/skills/yzlin286-wq-science-discipline-methods/SKILL.md

Other ways to add it

Cursor and other editors docs

Fetch the file and give its text to your model as instructions. No account or package needed.

Get the file

curl -fsSL https://app.decimal.ai/s/yzlin286-wq-science-discipline-methods/SKILL.md

Read the summary as JSON

curl -fsSL https://app.decimal.ai/s/yzlin286-wq-science-discipline-methods.json

Other ways to add it

Other setups docs

You don't need a DecimalAI account.

Version: v1, tested 11/3/2026
Source: yzlin286-wq/deepscient ↗
License: MIT

Manage it in DecimalAI

Saved prompts and skills, pinned versions, and traces of this skill in your runs. DecimalAI does not run your agent.

Claude Code reads files from your project, so DecimalAI config does not apply there.

On Claude Agent SDK: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On OpenAI Agents: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On OpenAI SDK: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Anthropic: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Gemini API: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On LangChain: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On CrewAI: set DECIMAL_API_KEY and add decimalai.init(crewai=True) to record runs and skill use. The skill version stays in your repo.

On Google ADK: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Pydantic AI: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Deep Agents: set DECIMAL_API_KEY and add decimalai.init(langchain=True) to record runs and skill use. The skill version stays in your repo.

On Microsoft Agent Framework: set DECIMAL_API_KEY and add decimalai.init(otel=True, agent_name="support") to record runs and skill use. The skill version stays in your repo.

On Strands: set DECIMAL_API_KEY and add decimalai.init(otel=True, agent_name="support") to record runs and skill use. The skill version stays in your repo.

Editors read files from your project, so DecimalAI config does not apply there.

Anywhere else: record a use with decimalai.log_skill_activation() inside a trace.

Use this skill

学科方法库：先定设计，再谈统计

这一层解决什么问题

一个研究生最常见的卡点不是「不会做统计」，而是问错了问题类型。

他手里有一个现象、一份数据、一个想说的话，但不知道这个领域用什么方式把现象变成证据。心理学靠随机分配与操纵检查，经济学靠外生变异与平行趋势，化学靠表征链，材料靠批次与标准，机器学习靠多种子与强基线——同样是「证明 A 影响 B」，各领域要求的证据形态完全不同。

所以这一层的产出不是结论，是这个领域公认的走路方式：能问什么、用哪个设计、要多少样本、量什么、跑什么方法、装什么软件、审稿人先打哪里。

入口

science_discipline_list {}                                  # 有哪些学科包
science_discipline_profile { domain: "biomed" }             # 某个学科的全貌
science_discipline_profile { question: "我想用 fMRI 研究注意力的神经机制" }   # 只有问题也行
science_discipline_profile { design: "重复测量" }            # 反向查：哪些领域有这个范式
science_discipline_profile { tool: "RDKit" }                # 反向查：这软件在哪个领域是标准
science_discipline_profile { journal: "nature" }            # 只知道要投哪

domain 可以给 id、中文名、英文名，或者整段研究问题——匹配器按「显式 → 期刊族 → 别名精确 → 别名包含 → 关键词 → generic」六级降级，并把 matchedBy / confidence / candidates 一起返回，让你知道它有多确定。

generic 不是失败，是诚实：没匹配上时不硬塞一个最近的学科，因为错误的学科包会让后面每一步建议都错（样本量、默认校正方法、报告规范全都跟着错）。

一个学科包里有九样东西

字段	回答什么	什么时候必看
`questionTypes`	这个领域能问哪几类问题，各需要什么前置	选题阶段
`designs`	有哪几种被接受的设计，各自的 `requires` / `nRule` / `threats`	写方案前
`measurements`	量什么、单位、精度、伪迹来源、怎么校准	设计问卷/实验时
`methods`	分析方法的适用条件、`tool`、`pitfall`	分析前
`tools`	装什么、`install`、`minimalScript`、是否离线、许可	开工第一天

About this skill

Automatic

Research pack

SkillSafety

✓ 3 of 3 passed

Code scan15 of 15 checks clean

0 critical · 0 warning · 0 info — scanner v8 — 11/2/2026

View 15 scanner checks

live_secretremote_code_executionreverse_shelldata_exfiltrationssrf_metadataagent_snoopinganti_refusaldestructive_commandsobfuscated_unicodeunicode_homoglyphopaque_blobsuspicious_urltool_overreachtrigger_abuseprompt_injection_phrasing

IntentSafe

LLM judge · does the skill do what it claims

ContentClean

LLM judge · policy & harmful-content review

Source

Imported

yzlin286-wq / deepscient

dsh-science/skills/science/science-discipline-methods/SKILL.md

View on GitHub ↗

License MITImported 11/2/2026Version v1

Illustrative Want to see what yzlin286-wq/science-discipline-methods would put in front of your model? Preview the rendered body and check its trigger phrases — no LLM call, no signup.

Related skills

Skills that do similar work, with their headline benchmark lift.

From the same source and nearby in the catalogue.

Ready to supercharge your AI agents?

SkillScore

Safety

What it changes

Track record

Use this skill

学科方法库：先定设计，再谈统计

这一层解决什么问题

入口

一个学科包里有九样东西

SkillSafety

Source

Related skills

More in the registry