Ready to supercharge your AI agents?

Install any skill in seconds. Free to start, no credit card required.

Monte Carlo Asset Health Skill · sickn33 | DecimalAI

Databy sickn33

Monte Carlo Asset Health Skill

Check the health of a data table/asset using Monte Carlo. Activates on "how is table X", "check health of X", "is X healthy", "status of X", "check on X table", or any health/status question about a data asset.

Maintained

SkillScore

SkillScore64/100

Test results 64

Safety

3/3 safety checks passed

Code scan
Intent
Content

What it changes

32%64%of test cases passed +32 pts

Without skill7 of 22

With skill14 of 22

7 fixed7 passed either way8 still failing0 broke

Measured on gemini-3.6-flash8/9/2026v1 · latest is v217 comparable

This benchmark measured an earlier version of the skill.

Track record

Agent runs: 0; All time

See one task, with and without the skill

One test taskWhen gathering active alerts for table `finance.general_ledger` during a health check, someone suggested including resolved and false-positive alerts. Which alert status values must actually be passed to `get_alerts` to identify active alerts?

Without the skillMissed

With the skillPassed

Same model, same task. Answers are capped and redacted.

Use this skill

Your agent runs on

Adds every file the skill has, pinned so you can update it. No account needed.

pip install "decimalai>=0.15"
decimalai skills add sickn33-monte-carlo-asset-health
claude --plugin-dir "$(git rev-parse --show-toplevel 2>/dev/null || pwd)/.agents"

The same install from Python, for a notebook or a setup script.

Install

pip install "decimalai>=0.15"

Add the skill

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-asset-health")
if result.exit_code:
    raise SystemExit(result.problems)

print("Added. Start Claude Code with the command below.")

Start Claude Code with it

claude --plugin-dir "$(git rev-parse --show-toplevel 2>/dev/null || pwd)/.agents"

Type these in a Claude Code session. No account or API key. It writes the skill and any files it bundles, and asks first when its safety rating isn't Passed.

Add the DecimalAI plugin, once

/plugin marketplace add decimal-labs/decimalai-claude-plugins
/plugin install decimalai@decimalai

Install this skill

/decimalai:install sickn33-monte-carlo-asset-health

The plugin needs python3 and curl on your machine.

No Python or account. Claude Code picks it up in its next session.

Save it into your project

curl -fsSL --create-dirs -o .claude/skills/sickn33-monte-carlo-asset-health/SKILL.md https://app.decimal.ai/s/sickn33-monte-carlo-asset-health/SKILL.md

Copy SKILL.md

Save it in your project, as

.claude/skills/sickn33-monte-carlo-asset-health/SKILL.md

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Claude Code docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[claude-agent-sdk]"
decimalai skills add sickn33-monte-carlo-asset-health

Add it to your agent

import asyncio

from claude_agent_sdk import ClaudeAgentOptions
from decimalai.claude_agent_sdk import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

async def main():
    question = "Hello!"
    async with support.run(question) as run:  # one user message, one run
        async for message in run.query(options=ClaudeAgentOptions(max_turns=6)):
            print(message)

# In a notebook or async code: await main()
asyncio.run(main())

Prefer its own loader? ClaudeAgentOptions(plugins=[skills_plugin()], skills="all") reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

The same install from Python, for a notebook or a setup script. agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[claude-agent-sdk]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-asset-health")
if result.exit_code:
    raise SystemExit(result.problems)

import asyncio

from claude_agent_sdk import ClaudeAgentOptions
from decimalai.claude_agent_sdk import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

async def main():
    question = "Hello!"
    async with support.run(question) as run:  # one user message, one run
        async for message in run.query(options=ClaudeAgentOptions(max_turns=6)):
            print(message)

# In a notebook or async code: await main()
asyncio.run(main())

Prefer its own loader? ClaudeAgentOptions(plugins=[skills_plugin()], skills="all") reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-asset-health/SKILL.md

Give it to your agent

import asyncio
from pathlib import Path
from claude_agent_sdk import ClaudeAgentOptions, query

skill = Path(".agents/skills/sickn33-monte-carlo-asset-health/SKILL.md").read_text()
options = ClaudeAgentOptions(system_prompt=f"You are a helpful agent.\n\n{skill}", max_turns=6)

async def main():
    async for message in query(prompt="Hello!", options=options):
        print(message)

# In a notebook or async code: await main()
asyncio.run(main())

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Claude Agent SDK docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[openai-agents]"
decimalai skills add sickn33-monte-carlo-asset-health

Add it to your agent

from agents import Agent, Runner
from decimalai.openai_agents import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    name=support.name,
    instructions=support.instructions,  # your prompt, then the skill list
    tools=[*support.tools],             # your tools, then load_skill
)
# In a notebook or async code: result = await Runner.run(agent, "Hello!")
result = Runner.run_sync(agent, "Hello!")

Using SandboxAgent? capabilities=[Shell(), decimalai.openai_agents.sandbox_skills()] points its own loader at the same folder.

Install

pip install "decimalai[openai-agents]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-asset-health")
if result.exit_code:
    raise SystemExit(result.problems)

from agents import Agent, Runner
from decimalai.openai_agents import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    name=support.name,
    instructions=support.instructions,  # your prompt, then the skill list
    tools=[*support.tools],             # your tools, then load_skill
)
# In a notebook or async code: result = await Runner.run(agent, "Hello!")
result = Runner.run_sync(agent, "Hello!")

Using SandboxAgent? capabilities=[Shell(), decimalai.openai_agents.sandbox_skills()] points its own loader at the same folder.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-asset-health/SKILL.md

Give it to your agent

from pathlib import Path
from agents import Agent, Runner

skill = Path(".agents/skills/sickn33-monte-carlo-asset-health/SKILL.md").read_text()
agent = Agent(name="support", instructions=f"You are a helpful agent.\n\n{skill}")
# In a notebook or async code: result = await Runner.run(agent, "Hello!")
result = Runner.run_sync(agent, "Hello!")

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

OpenAI Agents docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[openai]"
decimalai skills add sickn33-monte-carlo-asset-health

Add it to your agent

import json

from openai import OpenAI
from decimalai.openai import agent_config

client = OpenAI()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your tools, as Chat Completions takes them, and what answers each.
TOOLS = [{"type": "function", "function": {
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters": {"type": "object", "properties": {"order_id": {"type": "string"}},
                   "required": ["order_id"]},
}}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    # run.system is your prompt, then the skill list.
    messages = [{"role": "system", "content": run.system}, run.message]
    while True:
        reply = client.chat.completions.create(
            model="gpt-5.4-mini",
            messages=messages,
            tools=[*TOOLS, *run.tools],  # your tools, then load_skill
        ).choices[0].message
        messages.append(reply)
        if not reply.tool_calls:
            break
        for call in reply.tool_calls:
            # load_skill is answered by the run; your own tools by FUNCTIONS.
            function = FUNCTIONS.get(call.function.name)
            messages.append(run.tool_result(call) or {
                "role": "tool", "tool_call_id": call.id,
                "content": function(**json.loads(call.function.arguments)) if function
                else f"There is no tool named {call.function.name!r}.",
            })
print(reply.content)

# The Responses API takes run.response_tools instead of run.tools.

Install

pip install "decimalai[openai]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-asset-health")
if result.exit_code:
    raise SystemExit(result.problems)

import json

from openai import OpenAI
from decimalai.openai import agent_config

client = OpenAI()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your tools, as Chat Completions takes them, and what answers each.
TOOLS = [{"type": "function", "function": {
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters": {"type": "object", "properties": {"order_id": {"type": "string"}},
                   "required": ["order_id"]},
}}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    # run.system is your prompt, then the skill list.
    messages = [{"role": "system", "content": run.system}, run.message]
    while True:
        reply = client.chat.completions.create(
            model="gpt-5.4-mini",
            messages=messages,
            tools=[*TOOLS, *run.tools],  # your tools, then load_skill
        ).choices[0].message
        messages.append(reply)
        if not reply.tool_calls:
            break
        for call in reply.tool_calls:
            # load_skill is answered by the run; your own tools by FUNCTIONS.
            function = FUNCTIONS.get(call.function.name)
            messages.append(run.tool_result(call) or {
                "role": "tool", "tool_call_id": call.id,
                "content": function(**json.loads(call.function.arguments)) if function
                else f"There is no tool named {call.function.name!r}.",
            })
print(reply.content)

# The Responses API takes run.response_tools instead of run.tools.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-asset-health/SKILL.md

Give it to your agent

from pathlib import Path
from openai import OpenAI

client = OpenAI()
skill = Path(".agents/skills/sickn33-monte-carlo-asset-health/SKILL.md").read_text()
reply = client.chat.completions.create(
    model="gpt-5.4-mini",
    messages=[
        {"role": "system", "content": f"You are a helpful agent.\n\n{skill}"},
        {"role": "user", "content": "Hello!"},
    ],
).choices[0].message

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

OpenAI SDK docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[anthropic]"
decimalai skills add sickn33-monte-carlo-asset-health

Add it to your agent

import anthropic
from decimalai.anthropic import agent_config

client = anthropic.Anthropic()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

question = "Hello!"
with support.run(question) as run:  # one user message, one run
    answer = client.beta.messages.tool_runner(
        model="claude-haiku-5-5",
        max_tokens=4096,
        system=run.system,     # your prompt, then the skill list
        tools=[*run.tools],    # your tools, then load_skill
        messages=[{"role": "user", "content": question}],
    ).until_done()

Install

pip install "decimalai[anthropic]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-asset-health")
if result.exit_code:
    raise SystemExit(result.problems)

import anthropic
from decimalai.anthropic import agent_config

client = anthropic.Anthropic()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

question = "Hello!"
with support.run(question) as run:  # one user message, one run
    answer = client.beta.messages.tool_runner(
        model="claude-haiku-5-5",
        max_tokens=4096,
        system=run.system,     # your prompt, then the skill list
        tools=[*run.tools],    # your tools, then load_skill
        messages=[{"role": "user", "content": question}],
    ).until_done()

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-asset-health/SKILL.md

Give it to your agent

from pathlib import Path
import anthropic

client = anthropic.Anthropic()
skill = Path(".agents/skills/sickn33-monte-carlo-asset-health/SKILL.md").read_text()
reply = client.messages.create(
    model="claude-haiku-5-5",
    max_tokens=4096,
    system=f"You are a helpful agent.\n\n{skill}",
    messages=[{"role": "user", "content": "Hello!"}],
)

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Anthropic docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[google-genai]"
decimalai skills add sickn33-monte-carlo-asset-health

Add it to your agent

from google import genai
from google.genai import types
from decimalai.google_genai import agent_config

client = genai.Client()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your functions, as declarations for the model, and what answers each.
TOOLS = [{"function_declarations": [{
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters_json_schema": {"type": "object", "properties": {"order_id": {"type": "string"}},
                               "required": ["order_id"]},
}]}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    config = types.GenerateContentConfig(
        system_instruction=run.system,     # your prompt, then the skill list
        tools=[*TOOLS, *run.tool_params],  # your functions, then load_skill
    )
    contents = [{"role": "user", "parts": [{"text": run.message}]}]
    while True:
        response = client.models.generate_content(
            model="gemini-3.5-flash", contents=contents, config=config,
        )
        if not response.function_calls:
            break
        contents.append(response.candidates[0].content)
        parts = []
        for call in response.function_calls:
            # load_skill is answered by the run; your own functions by FUNCTIONS.
            # A loop of your own rather than automatic function calling, which
            # raises KeyError when the model asks for a function you did not pass.
            function = FUNCTIONS.get(call.name)
            parts.append(run.tool_result(call) or {"function_response": {
                "name": call.name, "id": call.id,
                "response": {"result": function(**(call.args or {})) if function
                             else f"There is no function named {call.name!r}."},
            }})
        contents.append({"role": "user", "parts": parts})
print(response.text)

Install

pip install "decimalai[google-genai]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-asset-health")
if result.exit_code:
    raise SystemExit(result.problems)

from google import genai
from google.genai import types
from decimalai.google_genai import agent_config

client = genai.Client()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your functions, as declarations for the model, and what answers each.
TOOLS = [{"function_declarations": [{
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters_json_schema": {"type": "object", "properties": {"order_id": {"type": "string"}},
                               "required": ["order_id"]},
}]}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    config = types.GenerateContentConfig(
        system_instruction=run.system,     # your prompt, then the skill list
        tools=[*TOOLS, *run.tool_params],  # your functions, then load_skill
    )
    contents = [{"role": "user", "parts": [{"text": run.message}]}]
    while True:
        response = client.models.generate_content(
            model="gemini-3.5-flash", contents=contents, config=config,
        )
        if not response.function_calls:
            break
        contents.append(response.candidates[0].content)
        parts = []
        for call in response.function_calls:
            # load_skill is answered by the run; your own functions by FUNCTIONS.
            # A loop of your own rather than automatic function calling, which
            # raises KeyError when the model asks for a function you did not pass.
            function = FUNCTIONS.get(call.name)
            parts.append(run.tool_result(call) or {"function_response": {
                "name": call.name, "id": call.id,
                "response": {"result": function(**(call.args or {})) if function
                             else f"There is no function named {call.name!r}."},
            }})
        contents.append({"role": "user", "parts": parts})
print(response.text)

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-asset-health/SKILL.md

Give it to your agent

from pathlib import Path
from google import genai
from google.genai import types

client = genai.Client()
skill = Path(".agents/skills/sickn33-monte-carlo-asset-health/SKILL.md").read_text()
response = client.models.generate_content(
    model="gemini-3.5-flash",
    contents="Hello!",
    config=types.GenerateContentConfig(system_instruction=f"You are a helpful agent.\n\n{skill}"),
)

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Gemini API docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[langchain]" langchain-openai
decimalai skills add sickn33-monte-carlo-asset-health

Add it to your agent

from langchain.agents import create_agent
from decimalai.langchain import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = create_agent(
    "openai:gpt-5.4-mini",
    tools=[],                         # your tools; the middleware adds load_skill
    middleware=[support.middleware],  # your prompt, the skill list and load_skill
)
result = agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

Install

pip install "decimalai[langchain]" langchain-openai

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-asset-health")
if result.exit_code:
    raise SystemExit(result.problems)

from langchain.agents import create_agent
from decimalai.langchain import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = create_agent(
    "openai:gpt-5.4-mini",
    tools=[],                         # your tools; the middleware adds load_skill
    middleware=[support.middleware],  # your prompt, the skill list and load_skill
)
result = agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-asset-health/SKILL.md

Give it to your agent

from pathlib import Path
from langchain.agents import create_agent

skill = Path(".agents/skills/sickn33-monte-carlo-asset-health/SKILL.md").read_text()
agent = create_agent("openai:gpt-5.4-mini", tools=[], system_prompt=f"You are a helpful agent.\n\n{skill}")
result = agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

LangChain docs

CrewAI's own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" "crewai>=1.15.27"
decimalai skills add sickn33-monte-carlo-asset-health

Add it to your agent

import decimalai.crewai
from crewai import Agent, Crew, Task

agent = Agent(
    role="Support", goal="Help the customer", backstory="A support agent.",
    llm=llm,                               # your own CrewAI LLM
    skills=decimalai.crewai.skills(),      # the installed folder
    tools=decimalai.crewai.skill_tools(),  # reads a skill's files, runs its scripts
)
task = Task(description="Hello!", expected_output="an answer", agent=agent)
Crew(agents=[agent], tasks=[task]).kickoff()

The same install from Python, for a notebook or a setup script. CrewAI's own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" "crewai>=1.15.27"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-asset-health")
if result.exit_code:
    raise SystemExit(result.problems)

import decimalai.crewai
from crewai import Agent, Crew, Task

agent = Agent(
    role="Support", goal="Help the customer", backstory="A support agent.",
    llm=llm,                               # your own CrewAI LLM
    skills=decimalai.crewai.skills(),      # the installed folder
    tools=decimalai.crewai.skill_tools(),  # reads a skill's files, runs its scripts
)
task = Task(description="Hello!", expected_output="an answer", agent=agent)
Crew(agents=[agent], tasks=[task]).kickoff()

No DecimalAI package. CrewAI's own loader reads the folder, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-asset-health/SKILL.md

Give it to your agent

from pathlib import Path
from crewai import Agent, Crew, Task

agent = Agent(
    role="Support", goal="Help the customer", backstory="A support agent.",
    llm=llm,                         # your own CrewAI LLM
    skills=[Path(".agents/skills")],
)
task = Task(description="Hello!", expected_output="an answer", agent=agent)
Crew(agents=[agent], tasks=[task]).kickoff()

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

CrewAI docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[adk]"
decimalai skills add sickn33-monte-carlo-asset-health

Add it to your agent

from decimalai.adk import DecimalAIPlugin, agent_config
from google.adk.agents import LlmAgent
from google.adk.apps import App

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = LlmAgent(
    name="support",          # ADK needs a Python identifier
    model="gemini-3.5-flash",
    instruction=support.instruction,  # your prompt, then the skill list
    tools=[*support.tools],           # your tools, then load_skill
)
# DecimalAIPlugin makes each invocation of runners built from this App one trace.
app = App(name="support", root_agent=agent, plugins=[DecimalAIPlugin()])

Prefer ADK's own loader? SkillToolset(skills=decimalai.adk.skills(), ...) reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

Install

pip install "decimalai[adk]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-asset-health")
if result.exit_code:
    raise SystemExit(result.problems)

from decimalai.adk import DecimalAIPlugin, agent_config
from google.adk.agents import LlmAgent
from google.adk.apps import App

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = LlmAgent(
    name="support",          # ADK needs a Python identifier
    model="gemini-3.5-flash",
    instruction=support.instruction,  # your prompt, then the skill list
    tools=[*support.tools],           # your tools, then load_skill
)
# DecimalAIPlugin makes each invocation of runners built from this App one trace.
app = App(name="support", root_agent=agent, plugins=[DecimalAIPlugin()])

Prefer ADK's own loader? SkillToolset(skills=decimalai.adk.skills(), ...) reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-asset-health/SKILL.md

Give it to your agent

from pathlib import Path
from google.adk.agents import LlmAgent

skill = Path(".agents/skills/sickn33-monte-carlo-asset-health/SKILL.md").read_text()
agent = LlmAgent(
    name="support",
    model="gemini-3.5-flash",
    instruction=lambda context: f"You are a helpful agent.\n\n{skill}",
)

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Google ADK docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[pydantic-ai]"
decimalai skills add sickn33-monte-carlo-asset-health

Add it to your agent

from pydantic_ai import Agent
from decimalai.pydantic_ai import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    "openai:gpt-4o-mini",
    name=support.name,
    tools=[],                 # your tools; the capability adds load_skill
    capabilities=[support],   # your prompt, the skill list and load_skill
)
# In a notebook or async code: result = await agent.run("Hello!")
result = agent.run_sync("Hello!")

On the Pydantic AI harness, decimalai.pydantic_ai_harness.skills(project) uses its own loader instead.

Install

pip install "decimalai[pydantic-ai]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-asset-health")
if result.exit_code:
    raise SystemExit(result.problems)

from pydantic_ai import Agent
from decimalai.pydantic_ai import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    "openai:gpt-4o-mini",
    name=support.name,
    tools=[],                 # your tools; the capability adds load_skill
    capabilities=[support],   # your prompt, the skill list and load_skill
)
# In a notebook or async code: result = await agent.run("Hello!")
result = agent.run_sync("Hello!")

On the Pydantic AI harness, decimalai.pydantic_ai_harness.skills(project) uses its own loader instead.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-asset-health/SKILL.md

Give it to your agent

from pathlib import Path
from pydantic_ai import Agent

skill = Path(".agents/skills/sickn33-monte-carlo-asset-health/SKILL.md").read_text()
agent = Agent("openai:gpt-4o-mini", instructions=f"You are a helpful agent.\n\n{skill}")
# In a notebook or async code: result = await agent.run("Hello!")
result = agent.run_sync("Hello!")

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Pydantic AI docs

Deep Agents' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" deepagents
decimalai skills add sickn33-monte-carlo-asset-health

Add it to your agent

import decimalai.deepagents
from deepagents import create_deep_agent

agent = create_deep_agent(model=model, **decimalai.deepagents.skills())
agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

The default backend reads files but has no shell. To run a skill's scripts, pass skills(backend=LocalShellBackend(...)).

The same install from Python, for a notebook or a setup script. Deep Agents' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" deepagents

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-asset-health")
if result.exit_code:
    raise SystemExit(result.problems)

import decimalai.deepagents
from deepagents import create_deep_agent

agent = create_deep_agent(model=model, **decimalai.deepagents.skills())
agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

The default backend reads files but has no shell. To run a skill's scripts, pass skills(backend=LocalShellBackend(...)).

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-asset-health/SKILL.md

Give it to your agent

from pathlib import Path
from deepagents import create_deep_agent

skill = Path(".agents/skills/sickn33-monte-carlo-asset-health/SKILL.md").read_text()
agent = create_deep_agent(model=model, system_prompt=f"You are a helpful agent.\n\n{skill}")
agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Deep Agents docs

Its own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" agent-framework
decimalai skills add sickn33-monte-carlo-asset-health

Add it to your agent

import asyncio

from agent_framework import Agent
from decimalai.agent_framework import skills

agent = Agent(client=client, instructions="You are a helpful agent.", context_providers=[skills()])
asyncio.run(agent.run("Hello!"))

It caches skills by default, so restart the process after decimalai skills update.

The same install from Python, for a notebook or a setup script. Its own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" agent-framework

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-asset-health")
if result.exit_code:
    raise SystemExit(result.problems)

import asyncio

from agent_framework import Agent
from decimalai.agent_framework import skills

agent = Agent(client=client, instructions="You are a helpful agent.", context_providers=[skills()])
asyncio.run(agent.run("Hello!"))

It caches skills by default, so restart the process after decimalai skills update.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-asset-health/SKILL.md

Give it to your agent

import asyncio
from pathlib import Path
from agent_framework import Agent

skill = Path(".agents/skills/sickn33-monte-carlo-asset-health/SKILL.md").read_text()
agent = Agent(client=client, instructions=f"You are a helpful agent.\n\n{skill}")
asyncio.run(agent.run("Hello!"))

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Microsoft Agent Framework docs

Strands' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" strands-agents
decimalai skills add sickn33-monte-carlo-asset-health

Add it to your agent

from decimalai.strands import skills
from strands import Agent
from strands.vended_tools import file_editor, shell

agent = Agent(
    model=model,                # always pass one: the default is Amazon Bedrock
    system_prompt="You are a helpful agent.",
    tools=[file_editor, shell],
    plugins=[skills()],
)
agent("Hello!")

Strands loads an agent's skills once, so build the agent again after decimalai skills update.

The same install from Python, for a notebook or a setup script. Strands' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" strands-agents

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-asset-health")
if result.exit_code:
    raise SystemExit(result.problems)

from decimalai.strands import skills
from strands import Agent
from strands.vended_tools import file_editor, shell

agent = Agent(
    model=model,                # always pass one: the default is Amazon Bedrock
    system_prompt="You are a helpful agent.",
    tools=[file_editor, shell],
    plugins=[skills()],
)
agent("Hello!")

Strands loads an agent's skills once, so build the agent again after decimalai skills update.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-asset-health/SKILL.md

Give it to your agent

from pathlib import Path
from strands import Agent

skill = Path(".agents/skills/sickn33-monte-carlo-asset-health/SKILL.md").read_text()
agent = Agent(model=model, system_prompt=f"You are a helpful agent.\n\n{skill}")
agent("Hello!")

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Strands docs

Adds every file the skill has, pinned so you can update it. Cursor, Copilot, Cline and Warp read this folder by themselves.

pip install "decimalai>=0.15"
decimalai skills add sickn33-monte-carlo-asset-health

No Python or account. Cursor, Copilot, Cline and Warp read this folder by themselves.

Save it into your project

curl -fsSL --create-dirs -o .agents/skills/sickn33-monte-carlo-asset-health/SKILL.md https://app.decimal.ai/s/sickn33-monte-carlo-asset-health/SKILL.md

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-asset-health/SKILL.md

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Cursor and other editors docs

Fetch the file and give its text to your model as instructions. No account or package needed.

Get the file

curl -fsSL https://app.decimal.ai/s/sickn33-monte-carlo-asset-health/SKILL.md

Read the summary as JSON

curl -fsSL https://app.decimal.ai/s/sickn33-monte-carlo-asset-health.json

This gets SKILL.md only. The skill's 2 other files are not included.

Other ways to add it

Other setups docs

You don't need a DecimalAI account.

Version: v2 (v1 tested 8/9/2026)
Source: sickn33/antigravity-awesome-skills ↗
License: MIT

Manage it in DecimalAI

Saved prompts and skills, pinned versions, and traces of this skill in your runs. DecimalAI does not run your agent.

Claude Code reads files from your project, so DecimalAI config does not apply there.

On Claude Agent SDK: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On OpenAI Agents: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On OpenAI SDK: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Anthropic: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Gemini API: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On LangChain: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On CrewAI: set DECIMAL_API_KEY and add decimalai.init(crewai=True) to record runs and skill use. The skill version stays in your repo.

On Google ADK: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Pydantic AI: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Deep Agents: set DECIMAL_API_KEY and add decimalai.init(langchain=True) to record runs and skill use. The skill version stays in your repo.

On Microsoft Agent Framework: set DECIMAL_API_KEY and add decimalai.init(otel=True, agent_name="support") to record runs and skill use. The skill version stays in your repo.

On Strands: set DECIMAL_API_KEY and add decimalai.init(otel=True, agent_name="support") to record runs and skill use. The skill version stays in your repo.

Editors read files from your project, so DecimalAI config does not apply there.

Anywhere else: record a use with decimalai.log_skill_activation() inside a trace.

Use this skill

SKILL.md

Bundled upstream support

Supporting files are included at skill-relative paths. See UPSTREAM-NOTICE.md for their pinned sources, licenses, hashes, and import changes.

When to Use

Use when the user goal matches this upstream workflow.

Monte Carlo Asset Health Skill

This skill checks the health of a data asset using Monte Carlo's observability platform. It produces a structured health report covering freshness, alerts, monitoring coverage, importance, and upstream dependency health.

Monte Carlo tool routing: This catalog bundle contains documentation, not an MCP server. Verify an installed server, live tool schema, endpoint and authorized account before calls. The upstream plugin uses a server whose fully-qualified tool names are mcp__plugin_mc-agent-toolkit_monte-carlo-mcp__<tool> (e.g. mcp__plugin_mc-agent-toolkit_monte-carlo-mcp__get_alerts). Bare tool names used in this skill (get_alerts, search, get_table, …) refer to that bundled server. If the session also has a separately-configured monte-carlo-mcp server, do not route to it — it may point at a different endpoint or credentials.

REQUIRED: Read reference files before executing

You MUST read both reference files using the Read tool before making any MCP tool calls. These files are the source of truth for tool calls, parameters, and response interpretation. This file only defines when to activate and how to format the output.

references/workflows.md (relative to this file) — exact tool calls, phases, and execution order
references/parameters.md (relative to this file) — parameter conventions and field details

Do NOT make any MCP tool calls until you have read both files.

When to activate this skill

Activate when the user:

Asks about health: "how is table X doing?", "check health of X", "is X healthy?"
Asks about status: "what's the status of X?", "status of orders table"
Asks to check on a table: "check on X table", "check on X"
Asks about reliability, freshness, or quality of a specific asset
References a table in context of incident triage or change planning

When NOT to activate this skill

Profiling or exploring table data (row counts, column stats, distributions) → use explore-table
Creating or suggesting monitors → use monitoring-advisor
Active incident triage (investigating root cause of a firing alert) → use prevent skill Workflow 3

Health report format

CRITICAL: Only report data returned by the tools defined in references/workflows.md. Do NOT call additional tools, do NOT infer or fabricate metrics. Each row below specifies exactly which tool provides its value.

All sections (Active Alerts, Monitors, Upstream Issues, Recommendations) must always appear with their heading. Never omit a section — if there is no data, show the empty-state text defined below.

Never use emoji shortcodes (like :warning: or :arrow_up:). Use Unicode emoji characters directly (like ⚠️) or plain text. Shortcodes render as raw text in the terminal.

Always display URLs as bare URLs, never as markdown links (e.g., [text](https://github.com/monte-carlo-data/mc-agent-toolkit/tree/main/skills/asset-health/url)).

{MC_WEBAPP_URL} appears throughout this template. Every occurrence must be replaced with the actual value returned by calling get_mc_webapp_url(). Never hardcode or guess this URL — it varies by environment.

Present results in this structure:

## Health Check: <table_name>

**Tags:** `tag1:value1`, `tag2:value2` (or "None" if no tags)
**Link:** {MC_WEBAPP_URL}/assets/{mcon}
**Warehouse:** snowflake-prod (Snowflake)
**Status: 🟢 Healthy / 🟡 Degraded / 🔴 Unhealthy** | **Importance:** 0.85 (key asset ⭐️)
**Avg Reads/Day:** ~538 | **Avg Writes/Day:** ~12

| Metric        | Value                          | Signal |
|---------------|--------------------------------|--------|
| Last Activity | Apr 6, 2025                    | 🟢 Recent    |
| Alerts        | 2 active                       | 🔴 Has alerts |
| Monitoring    | 3 active monitors              | 🟢 Monitored  |
| Upstream      | 1/3 sources unhealthy          | 🔴 Issues     |

### Active Alerts

| Date  | Type           | Priority | Status           | Link                                                    |
|-------|----------------|----------|------------------|---------------------------------------------------------|
| Apr 8 | Metric anomaly | P3       | Not acknowledged | {MC_WEBAPP_URL}/alerts/{alert_uuid} |
| Apr 7 | Freshness      | P2       | Acknowledged     | {MC_WEBAPP_URL}/alerts/{alert_uuid} |

If there are more than 5 active alerts, display only 5. Do NOT put the overflow
message inside the table as a row. Instead, put it as plain text on the line
immediately after the table:

There are N more alerts not shown for brevity

If there are zero active alerts, show:
No active alerts in the last 7 days.

### Monitors

| Type        | Name                                    | Incidents (7d) | Status              |
|-------------|-----------------------------------------|----------------|---------------------|
| TABLE       | Orders freshness and schema             | 3              | Running hourly      |
| METRIC      | Revenue row count                       | 0              | Never executed      |
| BULK_METRIC | Warehouse volume check                  | 21             | ⚠️ 1 table has errors |

If there are zero monitors, show:
No monitors configured for this table.

### Upstream Issues
- raw_orders — FRESHNESS alert: not updated in 8h
- raw_payments — healthy
- dim_customers — healthy

> Want me to check further upstream for **raw_orders**?

If there are no upstream dependencies, show:
No upstream dependencies found.

### Diagnosis

1-2 sentences describing observed issues and evidence limits. Causal explanations are hypotheses unless independently established; no observed alerts does not prove data correctness. This should naturally lead into the recommendations.

Example (unhealthy):
Upstream table raw_orders has not been updated in 8 hours, which is likely
causing staleness in this table. There are also 2 unacknowledged alerts.

Example (healthy):
No observed issues in the checked alert window; monitoring is configured. Report upstream checked/total and telemetry gaps before drawing further conclusions.

### Recommendations
- Investigate upstream raw_orders freshness — likely root cause of this table's staleness
- Acknowledge or investigate the 2 active alerts

If there are no recommendations, show:
No recommendations from the checked telemetry; data correctness and unmeasured coverage remain unverified.

Metric definitions — exact data sources

Each metric row MUST use only the specified data source. Do not add, infer, or embellish values beyond what the tool returns.

Metric	Data source	What to show	Signal
Last Activity	`get_table` → `last_activity`	Date of last activity (e.g., "Apr 6, 2025")	🟢 Recent (within 7 days) / 🟡 Stale (older than 7 days)
Alerts	`get_alerts` → count	"N active" or "No active alerts"	🔴 Has alerts / 🟢 No alerts
Monitoring	`get_monitors` → count where `is_paused` is false	"N active monitors" or "0 active monitors (M paused)". Include relevant details from monitor fields (incident counts, error counts, types).	🟢 Monitored (≥1 active) / 🔴 Unmonitored (0 active)
Upstream	`get_asset_lineage` (upstream) + Phase 3 checks	"N/M sources unhealthy" or "No observed issues among N checked sources (state total and unchecked count)"	🔴 Issues (any unhealthy) / 🟢 Healthy (all healthy)

Importance is shown next to the Status line (not in the metrics table). Source: get_table → importance_score + is_important. Show "X.XX (key asset ⭐️)" if key asset or importance > 0.8, otherwise just "X.XX".

Avg Reads/Day and Avg Writes/Day are shown below the Status line. Source: get_table → table_stats.avg_reads_per_active_day and table_stats.avg_writes_per_active_day.

Do NOT include downstream data. This skill only queries upstream lineage.

Status determination

Use these as observed-telemetry labels only. Any failed/missing required query makes the overall status Unknown/Partial. The seven-day created-time filter can omit older still-open alerts: label counts as active alerts created in the checked window, never all open alerts. A monitor that never executed or is failing is configured coverage, not demonstrated healthy operation. For a low-importance unmonitored asset use Unmonitored rather than Healthy. If more than ten parents exist, report checked/total and unchecked counts; never extrapolate all-source health.

🔴 Unhealthy: Any active alerts on the asset (from get_alerts with statuses ["NOT_ACKNOWLEDGED", "ACKNOWLEDGED", "WORK_IN_PROGRESS"] — see parameters.md)
🟡 Degraded: No active alerts, but 0 active monitors on a high-importance asset (importance > 0.8 or key asset)
🟢 Healthy: No active alerts and has at least 1 active monitor

Warehouse

Display the warehouse name and type from the search result. Always include this line.

Recommendations

Only include recommendations derivable from collected data:

Upstream health issues that may be root causes
Active alerts that need acknowledgment or investigation
Do NOT recommend specific monitor types — that is outside this skill's scope

Examples

User: Apply this skill to my current task.
Assistant: Follow the workflow in this skill, cite limitations, and ask before risky steps.

Limitations

Use this skill only when the task clearly matches its upstream source and local project context.
Verify commands, generated code, dependencies, credentials, and external service behavior before applying changes.
Do not treat examples as a substitute for environment-specific tests, security review, or user approval for destructive or costly actions.

About this skill

Automatic

Data Engineer pack

SkillSafety

✓ 3 of 3 passed

Code scan15 of 15 checks clean

0 critical · 0 warning · 0 info — scanner v8 — 11/8/2026

View 15 scanner checks

live_secretremote_code_executionreverse_shelldata_exfiltrationssrf_metadataagent_snoopinganti_refusaldestructive_commandsobfuscated_unicodeunicode_homoglyphopaque_blobsuspicious_urltool_overreachtrigger_abuseprompt_injection_phrasing

IntentSafe

LLM judge · does the skill do what it claims

ContentClean

LLM judge · policy & harmful-content review

Source

Imported

sickn33 / antigravity-awesome-skills

skills/monte-carlo-asset-health/SKILL.md

View on GitHub ↗

License Apache-2.0Imported 11/8/2026Version v2Bundled 2 files

Illustrative Want to see what sickn33/monte-carlo-asset-health would put in front of your model? Preview the rendered body and check its trigger phrases — no LLM call, no signup.

Related skills

Skills that do similar work, with their headline benchmark lift.

From the same source and nearby in the catalogue.

Ready to supercharge your AI agents?

SkillScore

Safety

What it changes

Track record

Use this skill

Bundled upstream support

When to Use

Monte Carlo Asset Health Skill

REQUIRED: Read reference files before executing

When to activate this skill

When NOT to activate this skill

Health report format

Metric definitions — exact data sources

Status determination

Tags

Warehouse

Recommendations

Examples

Limitations

SkillSafety

Source

Related skills

More in the registry