Ready to supercharge your AI agents?

Install any skill in seconds. Free to start, no credit card required.

Monte Carlo Remediation Skill · sickn33 | DecimalAI

Databy sickn33

Monte Carlo Remediation Skill

Investigate and remediate data quality alerts using Monte Carlo MCP tools. Runs root cause analysis, assesses blast radius, discovers available tools (MCP/CLI/API), proposes and executes fixes, or escalates with full context when uncertain.

Maintained

SkillScore

SkillScore59/100

Test results 59

Safety

3/3 safety checks passed

Code scan
Intent
Content

What it changes

27%59%of test cases passed +32 pts

Without skill6 of 22

With skill13 of 22

8 fixed5 passed either way8 still failing1 broke

Measured on gemini-3.6-flash8/10/2026v1 · latest is v218 comparable

This benchmark measured an earlier version of the skill.

Track record

Agent runs: 0; All time

See one task, with and without the skill

One test taskTo identify which pipeline or ETL job writes into `analytics.finance.revenue`, what specific `query_type` parameter value must be passed to `get_queries_for_table`?

Without the skillMissed

With the skillPassed

Same model, same task. Answers are capped and redacted.

Use this skill

Your agent runs on

Adds every file the skill has, pinned so you can update it. No account needed.

pip install "decimalai>=0.15"
decimalai skills add sickn33-monte-carlo-remediation
claude --plugin-dir "$(git rev-parse --show-toplevel 2>/dev/null || pwd)/.agents"

The same install from Python, for a notebook or a setup script.

Install

pip install "decimalai>=0.15"

Add the skill

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-remediation")
if result.exit_code:
    raise SystemExit(result.problems)

print("Added. Start Claude Code with the command below.")

Start Claude Code with it

claude --plugin-dir "$(git rev-parse --show-toplevel 2>/dev/null || pwd)/.agents"

Type these in a Claude Code session. No account or API key. It writes the skill and any files it bundles, and asks first when its safety rating isn't Passed.

Add the DecimalAI plugin, once

/plugin marketplace add decimal-labs/decimalai-claude-plugins
/plugin install decimalai@decimalai

Install this skill

/decimalai:install sickn33-monte-carlo-remediation

The plugin needs python3 and curl on your machine.

No Python or account. Claude Code picks it up in its next session.

Save it into your project

curl -fsSL --create-dirs -o .claude/skills/sickn33-monte-carlo-remediation/SKILL.md https://app.decimal.ai/s/sickn33-monte-carlo-remediation/SKILL.md

Copy SKILL.md

Save it in your project, as

.claude/skills/sickn33-monte-carlo-remediation/SKILL.md

This gets SKILL.md only. The skill's 3 other files are not included.

Other ways to add it

Claude Code docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[claude-agent-sdk]"
decimalai skills add sickn33-monte-carlo-remediation

Add it to your agent

import asyncio

from claude_agent_sdk import ClaudeAgentOptions
from decimalai.claude_agent_sdk import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

async def main():
    question = "Hello!"
    async with support.run(question) as run:  # one user message, one run
        async for message in run.query(options=ClaudeAgentOptions(max_turns=6)):
            print(message)

# In a notebook or async code: await main()
asyncio.run(main())

Prefer its own loader? ClaudeAgentOptions(plugins=[skills_plugin()], skills="all") reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

The same install from Python, for a notebook or a setup script. agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[claude-agent-sdk]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-remediation")
if result.exit_code:
    raise SystemExit(result.problems)

import asyncio

from claude_agent_sdk import ClaudeAgentOptions
from decimalai.claude_agent_sdk import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

async def main():
    question = "Hello!"
    async with support.run(question) as run:  # one user message, one run
        async for message in run.query(options=ClaudeAgentOptions(max_turns=6)):
            print(message)

# In a notebook or async code: await main()
asyncio.run(main())

Prefer its own loader? ClaudeAgentOptions(plugins=[skills_plugin()], skills="all") reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-remediation/SKILL.md

Give it to your agent

import asyncio
from pathlib import Path
from claude_agent_sdk import ClaudeAgentOptions, query

skill = Path(".agents/skills/sickn33-monte-carlo-remediation/SKILL.md").read_text()
options = ClaudeAgentOptions(system_prompt=f"You are a helpful agent.\n\n{skill}", max_turns=6)

async def main():
    async for message in query(prompt="Hello!", options=options):
        print(message)

# In a notebook or async code: await main()
asyncio.run(main())

This gets SKILL.md only. The skill's 3 other files are not included.

Other ways to add it

Claude Agent SDK docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[openai-agents]"
decimalai skills add sickn33-monte-carlo-remediation

Add it to your agent

from agents import Agent, Runner
from decimalai.openai_agents import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    name=support.name,
    instructions=support.instructions,  # your prompt, then the skill list
    tools=[*support.tools],             # your tools, then load_skill
)
# In a notebook or async code: result = await Runner.run(agent, "Hello!")
result = Runner.run_sync(agent, "Hello!")

Using SandboxAgent? capabilities=[Shell(), decimalai.openai_agents.sandbox_skills()] points its own loader at the same folder.

Install

pip install "decimalai[openai-agents]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-remediation")
if result.exit_code:
    raise SystemExit(result.problems)

from agents import Agent, Runner
from decimalai.openai_agents import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    name=support.name,
    instructions=support.instructions,  # your prompt, then the skill list
    tools=[*support.tools],             # your tools, then load_skill
)
# In a notebook or async code: result = await Runner.run(agent, "Hello!")
result = Runner.run_sync(agent, "Hello!")

Using SandboxAgent? capabilities=[Shell(), decimalai.openai_agents.sandbox_skills()] points its own loader at the same folder.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-remediation/SKILL.md

Give it to your agent

from pathlib import Path
from agents import Agent, Runner

skill = Path(".agents/skills/sickn33-monte-carlo-remediation/SKILL.md").read_text()
agent = Agent(name="support", instructions=f"You are a helpful agent.\n\n{skill}")
# In a notebook or async code: result = await Runner.run(agent, "Hello!")
result = Runner.run_sync(agent, "Hello!")

This gets SKILL.md only. The skill's 3 other files are not included.

Other ways to add it

OpenAI Agents docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[openai]"
decimalai skills add sickn33-monte-carlo-remediation

Add it to your agent

import json

from openai import OpenAI
from decimalai.openai import agent_config

client = OpenAI()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your tools, as Chat Completions takes them, and what answers each.
TOOLS = [{"type": "function", "function": {
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters": {"type": "object", "properties": {"order_id": {"type": "string"}},
                   "required": ["order_id"]},
}}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    # run.system is your prompt, then the skill list.
    messages = [{"role": "system", "content": run.system}, run.message]
    while True:
        reply = client.chat.completions.create(
            model="gpt-5.4-mini",
            messages=messages,
            tools=[*TOOLS, *run.tools],  # your tools, then load_skill
        ).choices[0].message
        messages.append(reply)
        if not reply.tool_calls:
            break
        for call in reply.tool_calls:
            # load_skill is answered by the run; your own tools by FUNCTIONS.
            function = FUNCTIONS.get(call.function.name)
            messages.append(run.tool_result(call) or {
                "role": "tool", "tool_call_id": call.id,
                "content": function(**json.loads(call.function.arguments)) if function
                else f"There is no tool named {call.function.name!r}.",
            })
print(reply.content)

# The Responses API takes run.response_tools instead of run.tools.

Install

pip install "decimalai[openai]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-remediation")
if result.exit_code:
    raise SystemExit(result.problems)

import json

from openai import OpenAI
from decimalai.openai import agent_config

client = OpenAI()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your tools, as Chat Completions takes them, and what answers each.
TOOLS = [{"type": "function", "function": {
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters": {"type": "object", "properties": {"order_id": {"type": "string"}},
                   "required": ["order_id"]},
}}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    # run.system is your prompt, then the skill list.
    messages = [{"role": "system", "content": run.system}, run.message]
    while True:
        reply = client.chat.completions.create(
            model="gpt-5.4-mini",
            messages=messages,
            tools=[*TOOLS, *run.tools],  # your tools, then load_skill
        ).choices[0].message
        messages.append(reply)
        if not reply.tool_calls:
            break
        for call in reply.tool_calls:
            # load_skill is answered by the run; your own tools by FUNCTIONS.
            function = FUNCTIONS.get(call.function.name)
            messages.append(run.tool_result(call) or {
                "role": "tool", "tool_call_id": call.id,
                "content": function(**json.loads(call.function.arguments)) if function
                else f"There is no tool named {call.function.name!r}.",
            })
print(reply.content)

# The Responses API takes run.response_tools instead of run.tools.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-remediation/SKILL.md

Give it to your agent

from pathlib import Path
from openai import OpenAI

client = OpenAI()
skill = Path(".agents/skills/sickn33-monte-carlo-remediation/SKILL.md").read_text()
reply = client.chat.completions.create(
    model="gpt-5.4-mini",
    messages=[
        {"role": "system", "content": f"You are a helpful agent.\n\n{skill}"},
        {"role": "user", "content": "Hello!"},
    ],
).choices[0].message

This gets SKILL.md only. The skill's 3 other files are not included.

Other ways to add it

OpenAI SDK docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[anthropic]"
decimalai skills add sickn33-monte-carlo-remediation

Add it to your agent

import anthropic
from decimalai.anthropic import agent_config

client = anthropic.Anthropic()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

question = "Hello!"
with support.run(question) as run:  # one user message, one run
    answer = client.beta.messages.tool_runner(
        model="claude-haiku-5-5",
        max_tokens=4096,
        system=run.system,     # your prompt, then the skill list
        tools=[*run.tools],    # your tools, then load_skill
        messages=[{"role": "user", "content": question}],
    ).until_done()

Install

pip install "decimalai[anthropic]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-remediation")
if result.exit_code:
    raise SystemExit(result.problems)

import anthropic
from decimalai.anthropic import agent_config

client = anthropic.Anthropic()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

question = "Hello!"
with support.run(question) as run:  # one user message, one run
    answer = client.beta.messages.tool_runner(
        model="claude-haiku-5-5",
        max_tokens=4096,
        system=run.system,     # your prompt, then the skill list
        tools=[*run.tools],    # your tools, then load_skill
        messages=[{"role": "user", "content": question}],
    ).until_done()

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-remediation/SKILL.md

Give it to your agent

from pathlib import Path
import anthropic

client = anthropic.Anthropic()
skill = Path(".agents/skills/sickn33-monte-carlo-remediation/SKILL.md").read_text()
reply = client.messages.create(
    model="claude-haiku-5-5",
    max_tokens=4096,
    system=f"You are a helpful agent.\n\n{skill}",
    messages=[{"role": "user", "content": "Hello!"}],
)

This gets SKILL.md only. The skill's 3 other files are not included.

Other ways to add it

Anthropic docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[google-genai]"
decimalai skills add sickn33-monte-carlo-remediation

Add it to your agent

from google import genai
from google.genai import types
from decimalai.google_genai import agent_config

client = genai.Client()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your functions, as declarations for the model, and what answers each.
TOOLS = [{"function_declarations": [{
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters_json_schema": {"type": "object", "properties": {"order_id": {"type": "string"}},
                               "required": ["order_id"]},
}]}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    config = types.GenerateContentConfig(
        system_instruction=run.system,     # your prompt, then the skill list
        tools=[*TOOLS, *run.tool_params],  # your functions, then load_skill
    )
    contents = [{"role": "user", "parts": [{"text": run.message}]}]
    while True:
        response = client.models.generate_content(
            model="gemini-3.5-flash", contents=contents, config=config,
        )
        if not response.function_calls:
            break
        contents.append(response.candidates[0].content)
        parts = []
        for call in response.function_calls:
            # load_skill is answered by the run; your own functions by FUNCTIONS.
            # A loop of your own rather than automatic function calling, which
            # raises KeyError when the model asks for a function you did not pass.
            function = FUNCTIONS.get(call.name)
            parts.append(run.tool_result(call) or {"function_response": {
                "name": call.name, "id": call.id,
                "response": {"result": function(**(call.args or {})) if function
                             else f"There is no function named {call.name!r}."},
            }})
        contents.append({"role": "user", "parts": parts})
print(response.text)

Install

pip install "decimalai[google-genai]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-remediation")
if result.exit_code:
    raise SystemExit(result.problems)

from google import genai
from google.genai import types
from decimalai.google_genai import agent_config

client = genai.Client()
# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")


def lookup_order(order_id: str) -> str:
    return f"Order {order_id} shipped yesterday."


# Your functions, as declarations for the model, and what answers each.
TOOLS = [{"function_declarations": [{
    "name": "lookup_order",
    "description": "Look up the status of an order.",
    "parameters_json_schema": {"type": "object", "properties": {"order_id": {"type": "string"}},
                               "required": ["order_id"]},
}]}]
FUNCTIONS = {"lookup_order": lookup_order}

question = "Where is order A1001?"
with support.run(question) as run:  # one user message, one run
    config = types.GenerateContentConfig(
        system_instruction=run.system,     # your prompt, then the skill list
        tools=[*TOOLS, *run.tool_params],  # your functions, then load_skill
    )
    contents = [{"role": "user", "parts": [{"text": run.message}]}]
    while True:
        response = client.models.generate_content(
            model="gemini-3.5-flash", contents=contents, config=config,
        )
        if not response.function_calls:
            break
        contents.append(response.candidates[0].content)
        parts = []
        for call in response.function_calls:
            # load_skill is answered by the run; your own functions by FUNCTIONS.
            # A loop of your own rather than automatic function calling, which
            # raises KeyError when the model asks for a function you did not pass.
            function = FUNCTIONS.get(call.name)
            parts.append(run.tool_result(call) or {"function_response": {
                "name": call.name, "id": call.id,
                "response": {"result": function(**(call.args or {})) if function
                             else f"There is no function named {call.name!r}."},
            }})
        contents.append({"role": "user", "parts": parts})
print(response.text)

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-remediation/SKILL.md

Give it to your agent

from pathlib import Path
from google import genai
from google.genai import types

client = genai.Client()
skill = Path(".agents/skills/sickn33-monte-carlo-remediation/SKILL.md").read_text()
response = client.models.generate_content(
    model="gemini-3.5-flash",
    contents="Hello!",
    config=types.GenerateContentConfig(system_instruction=f"You are a helpful agent.\n\n{skill}"),
)

This gets SKILL.md only. The skill's 3 other files are not included.

Other ways to add it

Gemini API docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[langchain]" langchain-openai
decimalai skills add sickn33-monte-carlo-remediation

Add it to your agent

from langchain.agents import create_agent
from decimalai.langchain import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = create_agent(
    "openai:gpt-5.4-mini",
    tools=[],                         # your tools; the middleware adds load_skill
    middleware=[support.middleware],  # your prompt, the skill list and load_skill
)
result = agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

Install

pip install "decimalai[langchain]" langchain-openai

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-remediation")
if result.exit_code:
    raise SystemExit(result.problems)

from langchain.agents import create_agent
from decimalai.langchain import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = create_agent(
    "openai:gpt-5.4-mini",
    tools=[],                         # your tools; the middleware adds load_skill
    middleware=[support.middleware],  # your prompt, the skill list and load_skill
)
result = agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-remediation/SKILL.md

Give it to your agent

from pathlib import Path
from langchain.agents import create_agent

skill = Path(".agents/skills/sickn33-monte-carlo-remediation/SKILL.md").read_text()
agent = create_agent("openai:gpt-5.4-mini", tools=[], system_prompt=f"You are a helpful agent.\n\n{skill}")
result = agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

This gets SKILL.md only. The skill's 3 other files are not included.

Other ways to add it

LangChain docs

CrewAI's own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" "crewai>=1.15.27"
decimalai skills add sickn33-monte-carlo-remediation

Add it to your agent

import decimalai.crewai
from crewai import Agent, Crew, Task

agent = Agent(
    role="Support", goal="Help the customer", backstory="A support agent.",
    llm=llm,                               # your own CrewAI LLM
    skills=decimalai.crewai.skills(),      # the installed folder
    tools=decimalai.crewai.skill_tools(),  # reads a skill's files, runs its scripts
)
task = Task(description="Hello!", expected_output="an answer", agent=agent)
Crew(agents=[agent], tasks=[task]).kickoff()

The same install from Python, for a notebook or a setup script. CrewAI's own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" "crewai>=1.15.27"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-remediation")
if result.exit_code:
    raise SystemExit(result.problems)

import decimalai.crewai
from crewai import Agent, Crew, Task

agent = Agent(
    role="Support", goal="Help the customer", backstory="A support agent.",
    llm=llm,                               # your own CrewAI LLM
    skills=decimalai.crewai.skills(),      # the installed folder
    tools=decimalai.crewai.skill_tools(),  # reads a skill's files, runs its scripts
)
task = Task(description="Hello!", expected_output="an answer", agent=agent)
Crew(agents=[agent], tasks=[task]).kickoff()

No DecimalAI package. CrewAI's own loader reads the folder, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-remediation/SKILL.md

Give it to your agent

from pathlib import Path
from crewai import Agent, Crew, Task

agent = Agent(
    role="Support", goal="Help the customer", backstory="A support agent.",
    llm=llm,                         # your own CrewAI LLM
    skills=[Path(".agents/skills")],
)
task = Task(description="Hello!", expected_output="an answer", agent=agent)
Crew(agents=[agent], tasks=[task]).kickoff()

This gets SKILL.md only. The skill's 3 other files are not included.

Other ways to add it

CrewAI docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[adk]"
decimalai skills add sickn33-monte-carlo-remediation

Add it to your agent

from decimalai.adk import DecimalAIPlugin, agent_config
from google.adk.agents import LlmAgent
from google.adk.apps import App

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = LlmAgent(
    name="support",          # ADK needs a Python identifier
    model="gemini-3.5-flash",
    instruction=support.instruction,  # your prompt, then the skill list
    tools=[*support.tools],           # your tools, then load_skill
)
# DecimalAIPlugin makes each invocation of runners built from this App one trace.
app = App(name="support", root_agent=agent, plugins=[DecimalAIPlugin()])

Prefer ADK's own loader? SkillToolset(skills=decimalai.adk.skills(), ...) reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

Install

pip install "decimalai[adk]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-remediation")
if result.exit_code:
    raise SystemExit(result.problems)

from decimalai.adk import DecimalAIPlugin, agent_config
from google.adk.agents import LlmAgent
from google.adk.apps import App

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = LlmAgent(
    name="support",          # ADK needs a Python identifier
    model="gemini-3.5-flash",
    instruction=support.instruction,  # your prompt, then the skill list
    tools=[*support.tools],           # your tools, then load_skill
)
# DecimalAIPlugin makes each invocation of runners built from this App one trace.
app = App(name="support", root_agent=agent, plugins=[DecimalAIPlugin()])

Prefer ADK's own loader? SkillToolset(skills=decimalai.adk.skills(), ...) reads the same folder. Use one or the other: a skill delivered both ways reaches the prompt twice.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-remediation/SKILL.md

Give it to your agent

from pathlib import Path
from google.adk.agents import LlmAgent

skill = Path(".agents/skills/sickn33-monte-carlo-remediation/SKILL.md").read_text()
agent = LlmAgent(
    name="support",
    model="gemini-3.5-flash",
    instruction=lambda context: f"You are a helpful agent.\n\n{skill}",
)

This gets SKILL.md only. The skill's 3 other files are not included.

Other ways to add it

Google ADK docs

agent_config() hands your agent the skill. With no DecimalAI key it reads your project's files and sends nothing. Needs SDK 0.27 or newer.

Install

pip install "decimalai[pydantic-ai]"
decimalai skills add sickn33-monte-carlo-remediation

Add it to your agent

from pydantic_ai import Agent
from decimalai.pydantic_ai import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    "openai:gpt-4o-mini",
    name=support.name,
    tools=[],                 # your tools; the capability adds load_skill
    capabilities=[support],   # your prompt, the skill list and load_skill
)
# In a notebook or async code: result = await agent.run("Hello!")
result = agent.run_sync("Hello!")

On the Pydantic AI harness, decimalai.pydantic_ai_harness.skills(project) uses its own loader instead.

Install

pip install "decimalai[pydantic-ai]"

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-remediation")
if result.exit_code:
    raise SystemExit(result.problems)

from pydantic_ai import Agent
from decimalai.pydantic_ai import agent_config

# With no DECIMAL_API_KEY this reads the skills your project lists, from disk.
support = agent_config("support", fallback="You are a helpful agent.")

agent = Agent(
    "openai:gpt-4o-mini",
    name=support.name,
    tools=[],                 # your tools; the capability adds load_skill
    capabilities=[support],   # your prompt, the skill list and load_skill
)
# In a notebook or async code: result = await agent.run("Hello!")
result = agent.run_sync("Hello!")

On the Pydantic AI harness, decimalai.pydantic_ai_harness.skills(project) uses its own loader instead.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-remediation/SKILL.md

Give it to your agent

from pathlib import Path
from pydantic_ai import Agent

skill = Path(".agents/skills/sickn33-monte-carlo-remediation/SKILL.md").read_text()
agent = Agent("openai:gpt-4o-mini", instructions=f"You are a helpful agent.\n\n{skill}")
# In a notebook or async code: result = await agent.run("Hello!")
result = agent.run_sync("Hello!")

This gets SKILL.md only. The skill's 3 other files are not included.

Other ways to add it

Pydantic AI docs

Deep Agents' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" deepagents
decimalai skills add sickn33-monte-carlo-remediation

Add it to your agent

import decimalai.deepagents
from deepagents import create_deep_agent

agent = create_deep_agent(model=model, **decimalai.deepagents.skills())
agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

The default backend reads files but has no shell. To run a skill's scripts, pass skills(backend=LocalShellBackend(...)).

The same install from Python, for a notebook or a setup script. Deep Agents' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" deepagents

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-remediation")
if result.exit_code:
    raise SystemExit(result.problems)

import decimalai.deepagents
from deepagents import create_deep_agent

agent = create_deep_agent(model=model, **decimalai.deepagents.skills())
agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

The default backend reads files but has no shell. To run a skill's scripts, pass skills(backend=LocalShellBackend(...)).

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-remediation/SKILL.md

Give it to your agent

from pathlib import Path
from deepagents import create_deep_agent

skill = Path(".agents/skills/sickn33-monte-carlo-remediation/SKILL.md").read_text()
agent = create_deep_agent(model=model, system_prompt=f"You are a helpful agent.\n\n{skill}")
agent.invoke({"messages": [{"role": "user", "content": "Hello!"}]})

This gets SKILL.md only. The skill's 3 other files are not included.

Other ways to add it

Deep Agents docs

Its own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" agent-framework
decimalai skills add sickn33-monte-carlo-remediation

Add it to your agent

import asyncio

from agent_framework import Agent
from decimalai.agent_framework import skills

agent = Agent(client=client, instructions="You are a helpful agent.", context_providers=[skills()])
asyncio.run(agent.run("Hello!"))

It caches skills by default, so restart the process after decimalai skills update.

The same install from Python, for a notebook or a setup script. Its own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" agent-framework

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-remediation")
if result.exit_code:
    raise SystemExit(result.problems)

import asyncio

from agent_framework import Agent
from decimalai.agent_framework import skills

agent = Agent(client=client, instructions="You are a helpful agent.", context_providers=[skills()])
asyncio.run(agent.run("Hello!"))

It caches skills by default, so restart the process after decimalai skills update.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-remediation/SKILL.md

Give it to your agent

import asyncio
from pathlib import Path
from agent_framework import Agent

skill = Path(".agents/skills/sickn33-monte-carlo-remediation/SKILL.md").read_text()
agent = Agent(client=client, instructions=f"You are a helpful agent.\n\n{skill}")
asyncio.run(agent.run("Hello!"))

This gets SKILL.md only. The skill's 3 other files are not included.

Other ways to add it

Microsoft Agent Framework docs

Strands' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" strands-agents
decimalai skills add sickn33-monte-carlo-remediation

Add it to your agent

from decimalai.strands import skills
from strands import Agent
from strands.vended_tools import file_editor, shell

agent = Agent(
    model=model,                # always pass one: the default is Amazon Bedrock
    system_prompt="You are a helpful agent.",
    tools=[file_editor, shell],
    plugins=[skills()],
)
agent("Hello!")

Strands loads an agent's skills once, so build the agent again after decimalai skills update.

The same install from Python, for a notebook or a setup script. Strands' own skill loader reads the installed folder. No DecimalAI account needed.

Install

pip install "decimalai>=0.16" strands-agents

Add it to your agent

from decimalai import skillpkg

# Writes .agents/skills and .decimal/skills.toml. Safe to run twice.
result = skillpkg.add("sickn33-monte-carlo-remediation")
if result.exit_code:
    raise SystemExit(result.problems)

from decimalai.strands import skills
from strands import Agent
from strands.vended_tools import file_editor, shell

agent = Agent(
    model=model,                # always pass one: the default is Amazon Bedrock
    system_prompt="You are a helpful agent.",
    tools=[file_editor, shell],
    plugins=[skills()],
)
agent("Hello!")

Strands loads an agent's skills once, so build the agent again after decimalai skills update.

No DecimalAI package. The whole skill goes in every prompt, and nothing pins or updates it.

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-remediation/SKILL.md

Give it to your agent

from pathlib import Path
from strands import Agent

skill = Path(".agents/skills/sickn33-monte-carlo-remediation/SKILL.md").read_text()
agent = Agent(model=model, system_prompt=f"You are a helpful agent.\n\n{skill}")
agent("Hello!")

This gets SKILL.md only. The skill's 3 other files are not included.

Other ways to add it

Strands docs

Adds every file the skill has, pinned so you can update it. Cursor, Copilot, Cline and Warp read this folder by themselves.

pip install "decimalai>=0.15"
decimalai skills add sickn33-monte-carlo-remediation

No Python or account. Cursor, Copilot, Cline and Warp read this folder by themselves.

Save it into your project

curl -fsSL --create-dirs -o .agents/skills/sickn33-monte-carlo-remediation/SKILL.md https://app.decimal.ai/s/sickn33-monte-carlo-remediation/SKILL.md

Copy SKILL.md

Save it in your project, as

.agents/skills/sickn33-monte-carlo-remediation/SKILL.md

This gets SKILL.md only. The skill's 3 other files are not included.

Other ways to add it

Cursor and other editors docs

Fetch the file and give its text to your model as instructions. No account or package needed.

Get the file

curl -fsSL https://app.decimal.ai/s/sickn33-monte-carlo-remediation/SKILL.md

Read the summary as JSON

curl -fsSL https://app.decimal.ai/s/sickn33-monte-carlo-remediation.json

This gets SKILL.md only. The skill's 3 other files are not included.

Other ways to add it

Other setups docs

You don't need a DecimalAI account.

Version: v2 (v1 tested 8/10/2026)
Source: sickn33/antigravity-awesome-skills ↗
License: MIT

Manage it in DecimalAI

Saved prompts and skills, pinned versions, and traces of this skill in your runs. DecimalAI does not run your agent.

Claude Code reads files from your project, so DecimalAI config does not apply there.

On Claude Agent SDK: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On OpenAI Agents: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On OpenAI SDK: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Anthropic: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Gemini API: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On LangChain: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On CrewAI: set DECIMAL_API_KEY and add decimalai.init(crewai=True) to record runs and skill use. The skill version stays in your repo.

On Google ADK: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Pydantic AI: save the skill to an agent here, set DECIMAL_API_KEY, and the same code uses it with no command to run. Changes you save reach the next run with no redeploy.

On Deep Agents: set DECIMAL_API_KEY and add decimalai.init(langchain=True) to record runs and skill use. The skill version stays in your repo.

On Microsoft Agent Framework: set DECIMAL_API_KEY and add decimalai.init(otel=True, agent_name="support") to record runs and skill use. The skill version stays in your repo.

On Strands: set DECIMAL_API_KEY and add decimalai.init(otel=True, agent_name="support") to record runs and skill use. The skill version stays in your repo.

Editors read files from your project, so DecimalAI config does not apply there.

Anywhere else: record a use with decimalai.log_skill_activation() inside a trace.

Use this skill

SKILL.md

Bundled upstream support

Supporting files are included at skill-relative paths. See UPSTREAM-NOTICE.md for their pinned sources, licenses, hashes, and import changes.

Monte Carlo Remediation Skill

This skill teaches you to investigate and remediate data quality issues detected by Monte Carlo. You use MC MCP tools to understand the alert context, run root cause analysis, assess blast radius, and then execute the appropriate remediation action using whatever external tools the user has connected.

Catalog adaptation: no Monte Carlo server is bundled in this skill tree. Discover the configured integration and confirm its account/endpoint before use. Tool names below are illustrative; live tool schemas are authoritative. Never switch credentials/endpoints silently.

Reference files live next to this skill file. Use the Read tool (not MCP resources) to access them:

Common remediation patterns and examples: references/patterns.md (relative to this file)
How to discover available tools at runtime: references/tool-discovery.md (relative to this file)
Safety rails and escalation criteria: references/safety.md (relative to this file)

When to activate this skill

Activate when the user:

Asks to remediate, fix, or respond to a data quality alert or incident
Mentions a specific alert ID, incident, or data quality issue they want resolved
Says something like "fix the freshness issue on X", "remediate this alert", "handle this incident"
Asks to triage AND fix an alert (triage alone without remediation intent → use the prevent skill's Workflow 3 instead)
Wants to automate a response to a recurring data quality pattern
Asks "what should I do about this alert?" or "how do I fix this?"

When NOT to activate this skill

Do not activate when the user is:

Just triaging or investigating an alert without remediation intent (use prevent skill's Workflow 3)
Creating or configuring monitors (use the monitoring-advisor skill)
Running a change impact assessment before code changes (use the prevent skill's Workflow 4)
Asking about general data quality best practices without a specific incident
Exploring table health or lineage without an active issue to fix

Available tools

Monte Carlo MCP server (investigation + post-remediation)

The Monte Carlo MCP server (monte-carlo-mcp) provides the investigation tools used in the workflows below. The workflows reference key tools by name (e.g., get_alerts, run_troubleshooting_agent, get_asset_lineage), but use any Monte Carlo tool that helps — the server has additional tools beyond what the workflows explicitly call out. Explore what's available.

Note on tool call examples: The code blocks below show key parameters to guide you. Always check the tool's own description for the complete parameter list and exact parameter names — they are authoritative.

External tools (remediation execution)

Remediation actions are executed via whatever tools are available — MCP servers, CLI tools, or APIs. See Workflow 2 (Capability Discovery) and references/tool-discovery.md for how to detect and use them. Use whatever works; don't limit yourself to a prescribed list.

Core workflow

Follow these workflows in order. Each workflow builds on the context gathered by the previous one.

Workflow 1: Investigation

Goal: Understand what happened, why it happened, and what's affected.

Before proposing ANY remediation action, you MUST complete this investigation. Do not skip steps — incomplete context leads to wrong fixes.

Step 1: Get alert context

get_alerts(
  alert_ids=["<alert_id>"],
)

If the user provided a table name instead of an alert ID:

search(query="<table_name>")
→ extract MCON
get_alerts(
  table_mcons=["<mcon>"],
  created_after="<7 days ago>",
  created_before="<now>",
  order_by="-createdTime",
  statuses=["NOT_ACKNOWLEDGED", "WORK_IN_PROGRESS"]
)

Extract from the alert: alert_type (Freshness, Volume, Schema Changes, etc.), severity, affected table MCONs, created_time.

Step 2: Assess triage priority

alert_assessment(
  incident_id="<alert_uuid>"
)

This returns incident_likelihood (HIGH/MEDIUM/LOW), alert_impact (HIGH/MEDIUM/LOW), and a summary. Use this to decide urgency:

HIGH impact + HIGH incident likelihood → proceed immediately to Troubleshooting Agent (TSA) analysis
LOW impact or LOW incident likelihood → still run TSA, but note to the user that this may not warrant immediate remediation

Step 3: Root cause analysis (TSA)

Prefer async mode when supported. Duration varies; synchronous calls may exceed tool timeouts. Bound polling by an explicit deadline and report running/failed state without relaunching duplicate work.

run_troubleshooting_agent(
  incident_id="<alert_uuid>",
  async_mode=true
)

While TSA runs, proceed with Steps 4–6 in parallel — gather lineage, table context, and query data while waiting. Then poll for TSA results:

get_troubleshooting_agent_results(
  incident_id="<alert_uuid>"
)

Status values:

not_found → TSA hasn't been triggered yet
running → still analyzing (wait 30s initially, then 60s intervals)
success → results available
failed → check full_response for error; proceed with manual investigation

When TSA succeeds, read both the tldr and the verifications section. The tldr summarizes the root cause — this is your primary input for choosing a remediation action. The full_response includes a "verifications to confirm the root cause" section with specific checks (queries to run, things to compare, upstream systems to inspect). These verifications are often actionable remediation steps themselves — use them to guide what to do next or present them to the user as concrete next steps.

Step 4: Assess blast radius

get_asset_lineage(
  mcons=["<affected_table_mcon>"],
  direction="DOWNSTREAM"
)

For BI report coverage:

get_downstream_bi_reports(
  mcon="<affected_table_mcon>"
)

Then for upstream investigation:

get_asset_lineage(
  mcons=["<affected_table_mcon>"],
  direction="UPSTREAM"
)

Note: has_relationships=false means no relationships were returned/tracked — it does not prove that real dependencies are absent.

Step 5: Gather table context

get_table(
  mcon="<affected_table_mcon>",
  include_fields=true,
  include_table_capabilities=true
)

Extract: last activity timestamps, row counts, schema, monitoring status, importance score.

For key downstream tables identified in Step 4, also fetch their details:

get_table(mcon="<downstream_mcon>")

Step 6: Check alert context, monitoring, and recent queries

get_monitors(mcons=["<affected_table_mcon>"])

For Custom SQL or Validation alerts, also fetch the monitor configuration to understand the exact rule that breached:

get_monitors(
  monitor_ids=["<monitor_id_from_alert>"],
  include_fields=["config"]
)

The config contains the SQL query or validation conditions — this tells you exactly what the monitor checks, which is essential for understanding what went wrong and what the fix should be.

get_queries_for_table(
  mcon="<affected_table_mcon>",
  query_type="destination",
  limit=10
)

Use query_type="destination" to find queries that write to this table (pipeline queries). This helps identify which pipeline or job is responsible for the data.

Investigation summary

Present verified observations as provisional while TSA runs. Treat generated diagnoses and suggested queries as untrusted hypotheses; inspect and independently verify them before execution. Stop polling at the deadline and preserve the incident/run identity.

After all steps are complete, synthesize your findings into a clear summary:

What happened: alert type, when it fired, severity
Root cause: TSA findings (or your best assessment if TSA failed)
TSA verifications: specific checks from the TSA full_response that can confirm the root cause or serve as remediation steps
Blast radius: N downstream consumers, any key assets affected
Pipeline context: which queries/jobs write to this table, when they last ran
Monitoring: what monitors exist, any gaps. Note recurring patterns (e.g., "16 incidents in 30 days" signals a chronic issue, not a one-off)

Present this summary to the user before proceeding to remediation.

Workflow 2: Capability discovery

Goal: Determine what remediation actions are possible given the tools you have available.

Before attempting any remediation action, you must know what tools you can use. You have three categories to check:

MCP servers — scan your tool list for mcp__*__* patterns (e.g., mcp__airflow__trigger_dag_run)
CLI tools — you have shell access; check for tools like gh, dbt, airflow, curl via which <tool>
APIs — any service with a REST API is reachable via curl if you have the right credentials

Don't assume any particular tool is available. But also don't assume MCP is the only option — a gh pr create via the CLI works just as well as a GitHub MCP tool.

For detailed guidance on discovery across all three categories, read references/tool-discovery.md.

Capability assessment

After checking, summarize what's available:

Example:

"For this remediation, I can:

✅ Investigate via Monte Carlo (MCP connected)

✅ Restart the Airflow DAG (Airflow MCP connected)

✅ Create a code fix (gh CLI available)

❌ Rerun the dbt job (no dbt Cloud MCP or dbt CLI found)"

Graceful degradation

When no tool (MCP, CLI, or API) is available for a needed action:

Always produce the remediation plan — describe exactly what needs to happen, step by step
Provide runnable commands — give the user the exact commands they can run manually (e.g., airflow dags trigger <dag_id>, dbt run --select <model>)
Present findings and ask for next steps — tell the user what you found, what you recommend, and ask how they'd like to proceed
Document on the alert — use create_or_update_alert_comment to record the diagnosis and recommended fix

Workflow 3: Remediation execution

Goal: Take the appropriate action to fix the root cause, with safety rails.

Read references/patterns.md for detailed examples of common remediation patterns.

Step 1: Select remediation action

Based on the TSA root cause and available tools, determine the action:

Root Cause Signal (from TSA)	Typical Remediation	Required Capability
Pipeline/DAG failure or delay	Restart the failed pipeline or task	Pipeline orchestration
dbt model failure	Rerun the failed dbt job	dbt operations
Schema change (upstream)	Assess impact, update downstream models or revert	Code changes
Volume anomaly (missing data)	Check upstream pipeline, trigger backfill	Pipeline orchestration + warehouse
Volume anomaly (duplicate data)	Identify and remove duplicates, fix pipeline	Warehouse + code changes
Permission/access error	Present findings, recommend user escalates to data platform team	None (user decides)
Infrastructure issue	Present findings, recommend user escalates to platform/ops team	None (user decides)
Unknown or complex root cause	Present full context and ask user for next steps	None (user decides)

If the root cause maps to multiple possible actions, present the options to the user with tradeoffs and let them choose.

If the root cause doesn't clearly map to any pattern, read references/patterns.md for the "Unknown / complex" pattern, which focuses on presenting full context to the user and asking for direction.

Step 2: Present the remediation plan

BEFORE executing anything, present the plan to the user:

"Based on the investigation:

Root cause: [TSA summary] Proposed action: [what you want to do] Reasoning: [why this action addresses the root cause] Risk: [what could go wrong, blast radius] Rollback: [how to undo if the fix causes new problems]"

Step 3: Execute (with safety rails)

Before executing, read references/safety.md for the full safety protocol. The essentials:

Explain before executing — never take action without telling the user what and why
Confirm destructive operations — wait for explicit user approval
Ask the user when uncertain — don't guess at a fix
One action at a time — execute one action, then decide next step
Log necessary redacted evidence — document authorized actions on the alert via create_or_update_alert_comment

Workflow 4: Post-remediation

Alert comments, ownership and status are external writes. Use only authorization already given for that exact incident/action; draft the update if absent. Never send Slack/email/page notifications without explicit user instruction.

Goal: Close out the incident properly — update status, document, and prevent recurrence.

Step 1: Update the alert

Ask the user what status to set:

FIXED — the root cause was identified and remediated
EXPECTED — the alert fired on expected behavior (e.g., planned maintenance)
NO_ACTION_NEEDED — the issue resolved itself or is not actionable

Then call update_alert(alert_id="<alert_uuid>", status="<chosen_status>").

Step 2: Document the remediation

create_or_update_alert_comment(
  alert_id="<alert_uuid>",
  comment="## Remediation Summary\n\n**Root cause:** [TSA findings]\n**Action taken:** [what was done]\n**Result:** [outcome]\n**Remediated by:** AI agent via remediation skill\n**Timestamp:** [ISO timestamp]"
)

Step 3: Consider prevention

After remediating, briefly assess whether this issue is likely to recur:

If the root cause is systemic (e.g., a flaky pipeline, a missing monitor): suggest adding a monitor or creating a ticket to address the underlying issue
If it was a one-off (e.g., infrastructure blip, manual error): document and move on

Do not automatically create monitors or tickets — suggest them and let the user decide.

Common mistakes to avoid

NEVER execute a remediation action without presenting the plan first. The user must understand what you're about to do.
NEVER skip the investigation phase. A wrong diagnosis leads to a wrong fix — or worse, a fix that causes new problems.
NEVER assume external MCP tools are available. Always check first. A missing tool is not an error — present findings to the user and ask for next steps.
NEVER chain multiple remediation actions without verifying each one. One action at a time.
NEVER modify data directly (DELETE, UPDATE, DROP) without explicit user confirmation AND a clearly stated rollback plan.
NEVER mark an alert as FIXED before verifying the fix. Check that the underlying condition has actually improved.
NEVER remediate silently. Always document what was done via create_or_update_alert_comment.

Limitations

Use this skill only when the task clearly matches its upstream source and local project context.
Verify commands, generated code, dependencies, credentials, and external service behavior before applying changes.
Do not treat examples as a substitute for environment-specific tests, security review, or user approval for destructive or costly actions.

About this skill

Automatic

Data Engineer pack

SkillSafety

✓ 3 of 3 passed

Code scan15 of 15 checks clean

0 critical · 0 warning · 0 info — scanner v8 — 11/8/2026

View 15 scanner checks

live_secretremote_code_executionreverse_shelldata_exfiltrationssrf_metadataagent_snoopinganti_refusaldestructive_commandsobfuscated_unicodeunicode_homoglyphopaque_blobsuspicious_urltool_overreachtrigger_abuseprompt_injection_phrasing

IntentSafe

LLM judge · does the skill do what it claims

ContentClean

LLM judge · policy & harmful-content review

Source

Imported

sickn33 / antigravity-awesome-skills

skills/monte-carlo-remediation/SKILL.md

View on GitHub ↗

License Apache-2.0Imported 11/8/2026Version v2Bundled 3 files

Illustrative Want to see what sickn33/monte-carlo-remediation would put in front of your model? Preview the rendered body and check its trigger phrases — no LLM call, no signup.

Other skills for the same job

Published skills whose descriptions closely match this one, with their headline benchmark lift.

Related skills

Skills that do similar work, with their headline benchmark lift.

From the same source and nearby in the catalogue.

Ready to supercharge your AI agents?

SkillScore

Safety

What it changes

Track record

Use this skill

Bundled upstream support

Monte Carlo Remediation Skill

When to activate this skill

When NOT to activate this skill

Available tools

Monte Carlo MCP server (investigation + post-remediation)

External tools (remediation execution)

Core workflow

Workflow 1: Investigation

Step 1: Get alert context

Step 2: Assess triage priority

Step 3: Root cause analysis (TSA)

Step 4: Assess blast radius

Step 5: Gather table context

Step 6: Check alert context, monitoring, and recent queries

Investigation summary

Workflow 2: Capability discovery

Capability assessment

Graceful degradation

Workflow 3: Remediation execution

Step 1: Select remediation action

Step 2: Present the remediation plan

Step 3: Execute (with safety rails)

Workflow 4: Post-remediation

Step 1: Update the alert

Step 2: Document the remediation

Step 3: Consider prevention

Common mistakes to avoid

Limitations

SkillSafety

Source

Other skills for the same job

Related skills

More in the registry